RGP30A THRU RGP30M
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
FEATURES
♦ Plastic package has
Underwriters Laborator y
Flammability Classification 94V-0
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature metallurgically bonded construction
♦ 3.0 Ampere operation at TA=55°C with no ther mal
runaway
♦ Typical IRless than 0.2µA
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.12 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RGP RGP RGP RGP RGP RGP RGP
SYMBOLS 30A 30B 30D 30G 30J 30K 30M UNITS
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C I(AV) 3.0 Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) IFSM 125.0 Amps
Maximum instantaneous forward voltage at 3.0A VF1.3 Volts
Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=125°C IR100.0 µA
Maximum full load reverse current, full cycle average
0.375" (9.5mm) lead length at TA=55°C IR(AV) 100.0 µA
Maximum reverse recover y time (NOTE 1) trr 150 250 500 ns
Typical junction capacitance (NOTE 2) CJ60.0 pF
Typical ther mal resistance (NOTE 3) RΘJA 20.0 °C/W
Operating junction and storage temperature range TJ,TSTG -65 to +175 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Ther mal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
0.210 (5.3)
0.190 (4.8)
DIA.
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
DO-201AD
Dimensions in inches and (millimeters)
*
Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
PATENTED*
®
0 25 50 75 100 125 150 175
0
1.0
2.0
3.0
4.0
110100
10
100
200
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
10
100
110100
020406080100
0.01
0.1
1
10
20
RATINGS AND CHARACTERISTIC CURVES RGP30A THRU RGP30M
AMBIENT TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE
CURRENT, AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
TJ=125°C
TJ=100°C
TJ=25°C
TJ=25°C
PULSE WIDTH=300µs
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
FIG. 1 - FORWARD CURRENT DERATING CURVE
0.375" (9.5mm) LEAD LENGTH
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ=75°C
REVERSE V OLTAGE, V OLTS
RESISTIVE OR
INDUCTIVE LOAD
