1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
FOR BOARD-TO-CABLE CONNECTION
230R SERIES (CONFORMING TO IPI)
■FEATURES
• These half-pitch connectors conform to the Intelligent
Peripheral Interface (IPI) recommended by ANSI.
• 1.27 mm (0.050 in.) pitch contact arrangement
enables high-density mounting.
• Cables and connectors are assembled by discrete
wire IDC.
• Connectors on the cable side provide excellent EMI
shielding/ESD protection with inner-metal and outer-
plastic dual cover.
• Tails are spaced in a four-row staggered arrangement
(2.54 mm × 1.905 mm) (0.100 in. × 0.075 in.) for easy
PC board design.
■SPECIFICATIONS
■MATERIALS
Specifications
–55°C to +85°C
DC 1 A
AC 240 V
30 mΩ max. (DC 6 V, 0.1A)
1000 MΩ min. (DC 500 V)
AC 750 V for 1 minute
AWG #28 and #30 stranded wires
with φ0.65 to 0.88 mm (0.026 to
0.035 in.) insulation diameter.
(The applicable wires depend on
the number of contacts. See the
descriptions of IDC plugs and EMI/
ESD resistant covers.)
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstand voltage
Applicable wire (standard)
Item
Insulator
Conductor
Plating
Materials
Polyester (UL94V-0)
Copper alloy
Contact
Terminal
Gold plating
Palladium plating
2
230R Series (Conforming to IPI)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE SOCKET WITH HEXAGONAL NUTS FOR BOARD LOCK
■DIMENSIONS
When mounting a connector on a panel, remove the hexagonal nuts and spacers. After mounting
on the panel, replace and tighten the hexagonal nuts. Unit: mm (in.)
■MOUNTING HOLE LAYOUT (COMPONENT SIDE)
End terminal
No. 3
No. 2
No. 1
B
±0.1 (±.004)
C
±0.1 (±.004)
3.5 mm (0.138 in.) max.
50 contacts
End terminal
No. 3
No. 2
No. 1
B
±0.1 (±.004)
C
±0.1 (±.004)
3.5 mm (0.138 in.) max.
100 contacts
1.27
±0.1
(0.50
±0.004
)
φ0.8
±0.06
(φ0.031
±0.002
)
1.905
±0.1
(0.075
±0.004
)
1.905
±0.1
(0.075
±0.004
)
φ3.0
(φ0.118)
φ0.8
±0.06
(φ0.031
±0.002
)
φ3.00
(φ0.118)
Unit: mm (in.)
■PATTERN INHIBITED AREAS ■RECOMMENDED PANEL DIMENSIONS
Unit: mm (in.)
(B – 3.7)
±0.1
(( – 0.146)
±.004
)
B
±0.1 (±.004)
7.5
±0.1
(0.295
±.004
)
R 1.4
±0.1
(0.055
±.004
)
Thickness of recommended panel: t = 1.5 mm (0.059 in.)
Unit: mm (in.)
B
±0.1 ( ±0.004)
6.0
–0
(0.236
–0
)
2.7
–0
(0.106
–0
)
3.3
–0
(0.130
–0
)
11.6
–0
(0.457
–0
)
■PART NUMBERS AND DIMENSIONS
Number of
contacts
50
100
Part number
FCN-235D050-G/P#BA
FCN-235D100-G/P#BA
Dimensions: mm (in.)
A
52.45 (2.065)
84.20 (3.315)
B
46.48 (1.830)
78.23 (3.080)
C
30.48 (1.200)
62.23 (2.450)
D
34.65 (1.364)
66.40 (2.614)
This series includes connectors with No.4-40UNC screws for hexagonal nuts. Specify a part number by replacing
#BA at the end with #AA.
Example: FCN-235D100-G/P#AA
A
B
C
1.27 (0.050) End terminal
No. 3
No. 2
No. 1
0.40(0.015)
5.50
(0.216)
8.74
(0.344)
2-No. 2-56UNC
D
B
Spacer Spacer
6.605
(0.260)
11.70
(0.460) 5.0
(0.196)
5.51
(0.216)
4.70 (0.185)
1.905 (0.075)
0.40 (0.015)
2.88 (0.113)
3.40 (0.133)
Thickness of board: t=1.6 mm (0.063 in.)
4.37
(0.179)
3
230R Series (Conforming to IPI)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
CABLE ASSEMBLY TOOLS
The following tools are necessary to assemble FCN-230/230R/240/240R series connectors.
• Cable aligner (semi-automatic cable aligner or hand tool)
• IDC tool
1. Cable Aligner
Item
FCN-237J
FCN-237R
FCN-247J
FCN-247R
Body/Controller
FCN-M562-A/C
Bed
FCN-P560-2/A
FCN-P560-2/J
Adaptor
FCN-K560-A-xxx
FCN-K560-R-xxx
FCN-K560-K-xxx
FCN-K560-J-xxx
Semiautomatic cable aligner Hand tool
FCN-237T-T062/H
FCN-247T-T061/H
2. Insulation Displacement Connection (IDC) tool
Item
FCN-237J
FCN-237R
FCN-237D
FCN-247J
FCN-247R
FCN-247D
Hand press
FCN-237T-T109/H
Head/Table
FCN-237T-T064/H
FCN-237T-T067/H
FCN-237T-T075/H
FCN-247T-T066/H
FCN-247T-T068/H
FCN-247T-T077/H
• Cable aligner • Insulation displacement connection (IDC) tool
xxx indicates the number of contacts.
4
230R Series (Conforming to IPI)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Stand
Applicator
Cover 1
Cover 2
Clamp section
Clamp lever
Wires
Cable key
Sinking comb
Applicator
Bed
Lock
Lever
Guide Stopper
Handle
Semi-Automatic Tools
Cable Aligning Machine
Main Body (FCN-M551-120, FCN-M551-220)
Head (FCN-H550-1/A Stand (FCN-D550)
Applicator (FCN-A550-1/A-xxx) IDC Tool (FCN-237T-T109/H,
FCN-237T-T067/H locator)
1. Set the applicator on the stand.
Set covers 1 and 2 in the applicator. 2. Push the wire into the sinking
combs. 3. Set the applicator onto the
installation table and begin
cable alignment
4. Take the covers off the
applicator. 5. Put covers together and
pre-assemble them to
the connector body.
6. Conduct final aaembly as shown.
Semi-automatic-Medium Level
Body: :FCN-M551-120
Head Assembly: :FCN-H550
Applicator: :FCN-A550-1/A-***(***: 020, 028, 036, 050, 068, 080)
Stand: :FCN-D550
.oNsoP eriWdeilppA )mm:.aiDeriw()mm:.aiDeriw()mm:.aiDeriw()mm:.aiDeriw()mm:.aiDeriw( traProtcennoC
rebmunrebmunrebmunrebmunrebmun
rengilAelbaC looTCDI
looTdnaHotuA-imeS
02
|
86
03#ro82#
)88.0ot8.0( F/G-020R732-NCF
|
F/G-860R732-NCF H/260T-T732-NCF
|
H/340t-t732-NCF )*wolebeeS( :SSERPDNAH
H/901T-T732-NCF
:rotacoL&DAEH
H/760T-T732-NCF
03#ro82#
)56.0ot5.0( E/G-020R732-NCF
|
E/G-860R732-NCF
FCN-230R SERIES SCSI II CABLE CONNECTORS
PLUG: FCN-237R***-G/E, -G/F (***: 020, 026, 028, 050, 068)
5
230R Series (Conforming to IPI)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 09/2001
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info.marketing@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
