Specification Drawing No. Issued Date EQM08-5OC-00AG171-00 Nov-05-2012 Note: In case of specification change, KYOCERA Part Number also will be changed. Customer Part Number KYOCERA Part Number KC5032Axx.xxxxC10E00 Remarks: This product is Pb-Free and RoHS compliant. Moisture Sensitivity Level (MSL): Level1 Customer Acceptance Please sign here and send one copy back to us. Signature: Accepted Date: Seller Manufacturer KYOCERA Corporation KYOCERA Crystal Device Corporation 6 Takeda Tobadono-cho, Fushimi-ku, Kyoto, Japan 612-8501 TEL: +81-75-604-3500 FAX: +81-75-604-3501 1-8-1 Izumihon-cho, Komae, Tokyo, Japan 201-8648 TEL: +81-3-5497-3110 FAX: +81-3-5497-3208 Design Department KYOCERA Crystal Device Corporation Nagano Okaya Plant Oscillator Division Engineering Department Clock Oscillator Application Engineering Section DocNo: EQM07-5OC-003AA0E-01 Quality Assurance Approved by Checked by Issued by M. Morimoto T. Koyanagi Y. Saito T. Asakura Drawing No. EQM08-5OC-00AG171-00 Revision History Rev. No. Description of revise Issued Date Approved by Checked by Issued by 00 First Edition Nov-05-2012 T. Koyanagi Y. Saito T. Asakura DocNo: EQM07-5OC-003AA0E-01 Drawing No. EQM08-5OC-00AG171-00 (1/5) 1. Scope This specification shall be defined of the Clock Oscillator for the integrated circuits (ICs). 2. Customer Part Number 3. KYOCERA Part Number KC5032Axx.xxxxC10E00 4. Electrical Characteristics 4-1. Absolute Maximum Rating Item Power Supply Voltage Input Voltage Storage Temperature Range Symbol Rated Value Units VCC VIN TSTG -0.5 to +4.0 -0.3 to VCC +0.3 -55 to +125 V V C Note: If the part is used beyond absolute maximum ratings, it may cause internal destruction. The part should be used under the recommended operating conditions the reliability of this part may be damaged if those conditions are exceeded. 4-2. Recommended Operating Conditions Item Power Supply Voltage Input Voltage Operating Temperature Range 4-3. Electrical Characteristics Symbol Item Frequency Range FO Frequency Tolerance F_tol Current Consumption (Loaded/ 1.6VCC2.0V) Current Consumption (Loaded/ 2.0<VCC2.8V) ICC Current Consumption (Loaded/ 2.8<VCC3.63V) Standby Current Symmetry(Duty Ratio) Rise Time/ Fall Time (10% VCC to 90% VCC) I_std SYM Tr/ Tf Output Voltage-"L" Output Voltage-"H" Output Load Input Voltage-"L" Input Voltage-"H" Output Disable Time Output Enable Time Start-up Time VOL VOH CL VIL VIH t_dis t_ena t_sta 1 Sigma Jitter* JSigma Peak to Peak Jitter* JPK-PK Symbol Min Typ Max Units VCC VIN TOPR 1.6 0 -10 3.3 --25 3.63 VCC +70 V V C Min Typ Max Units 50.0001 --- 135 MHz -50 --- +50 ppm --------------------45 --------- --------------------50 ------------------------------- 10.0 15.0 16.0 14.0 17.0 18.0 17.0 19.0 22.0 10 55 3.5 3.0 2.5 90% VCC ----70% VCC --------------- Include initial tolerance, operating temperature range, rated power supply voltage change, load change, aging (1year @25C), shock and vibration 50 < f0 85MHz 105 < f0 135MHz 50 < f0 85MHz mA 85 < f0 105MHz 105 < f0 135MHz 50 < f0 85MHz 85 < f0 105MHz 105 < f0 135MHz A % @ 50% VCC 1.6VCC2.0V ns 2.0<VCC2.8V 2.8<VCC3.63V V --15 pF --150 5 10 5 4 40 30 Remarks 85 < f0 105MHz 10% VCC 30% VCC Remarks IOL= 4mA IOH=-4mA CMOS V ns ms ms @Minimum operating voltage to be 0sec 50< f0 100MHz ps 100< f0 135MHz 50< f0 100MHz 100< f0 135MHz Note: All electrical characteristics have defined on the maximum loaded and recommended operating conditions. * Based on Time Interval Analyzer "Wavecrest DTS-2079" with VISI 6.3.1. Table 1 Doc.NO: EQM07-5OC-003AA0E-01 Drawing No. EQM08-5OC-00AG171-00 (2/5) 4-4. Measurement Condition The reference temperature shall be 252C. The measurement shall be performed at the temperature range of 5 C to 35 C unless otherwise the result is doubtful. 4-5. Measurement Circuit The electrical characteristics shall be measured by test circuit "Fig. 1". Also jitter shall be measured by test circuit "Fig. 3". 4-6. Clock Timing Chart The clock timing chart is "Fig. 2". Test Point Pad4 Tr Tf Pad3 A VCC VOH Oscillator + Power Supply Pad1 V Pad2 50%VCC CL 0.01F - 90%VCC E/D Control 10%VCC VOL GND T1 Symmetry = T1/ T0 X100(%) T0 = 1/fOUT Note: CL includes probe and test fixture capacitance Fig.1 Test Circuit Fig.2 Clock Timing Chart (C-MOS Output) <Measurement Conditions> Clock Oscillator Test Fixture Pad4 + Pad1 Power Supply - Pad3 WaveCrest DTS-2079 Pad2 ATT 6dB Oscillator z z 10F 0.01F E/D Control Time Interval Analyzer 3/4 WaveCrest DTS-2079 Jitter analysis software 3/4 VISI 6.3.1 DTS timer calibration 3/4 Over 30minnites warm-up 3/4 Extend 30minites calibration Jitter histogram conditions (Tail-fit) 3/4 More than 50,000cyc Hits 3/4 Bit Error Ratio (BER) -12 (14sigma) z 50 ohm SMA Termination 50 ohm COAX with SMA Connectors z Fig.3 Jitter Test Circuit 5. Dimensions and Marking In case of made in Philippines 5.0 Pad1 Indication 1.2 0.5 Output Frequency 16.000 Manufacturing Date Code 0.1 KCCCG 3.2 Output Frequency Pad1 Indication 16.000 (e.g. Frequency: 16MHz) 2.5 Output Frequency 0.5 1.0 The output frequency is six-digit including a decimal point. The frequency greater than the number of digits have rounded down. (e.g. 14.31818MHz I"14.318") Plating Ni+Au Tolerance: +/-0.1 Unit:(mm) Pad arrangement 1 Enable/Disable 2 Case GND 3 Output 4 VCC Manufacturing Date Code KCCCG 0.9 #2 #1 1.2 In case of made in Japan #3 #4 Enable/Disable Function Pad1 Pad3 (Output) OPEN Active "H" Level Active "L" Level High Z (No-Oscillation) Manufacturing Date Code Year Code Year Code 2001 A 2011 2002 B 2012 2003 C 2013 2004 D 2014 2005 E 2015 2006 F 2016 2007 G 2017 2008 H 2018 2009 J 2019 2010 K 2020 It repeats from A in 2021 afterwards. L M N P Q R S T V W and Month Code Day Code Day Code Day Code 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 A B C 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 A 11 12 13 14 15 16 17 18 19 20 B C D E F G H J K L 21 22 23 24 25 26 27 28 29 30 31 M N P Q R S T V W X Y e.g. :"C46" means "Apr-6-2003" Table 2 Doc.NO: EQM07-5OC-003AA0E-01 Drawing No. EQM08-5OC-00AG171-00 (3/5) 6. Parts Numbering Guide KC5032A 125.000 C 1 0 E 00 A B C D E F G A. Series (SMD Oscillator) B. Output Frequency (E.g. 125.000MHz) C. Output C: C-MOS D. Supply Voltage 1: 1.8V/ 2.5V/ 3.3V Compatible E. Frequency Tolerance* 0: 50ppm F. Symmetry (Duty Ratio) and Enable/Disable Function E: Symmetry: 45% to 55% with Stand-by Function G. Suffix for Individual Requirements (STD Specification is "00") Packing (Tape & Reel 1,000pcs/Reel) *Over All Conditions: Include initial tolerance, operating temperature range, rated power supply voltage change, load change, aging (1year @25C), shock and vibration 7. Environmental Characteristics Items Conditions Criteria of Acceptance Soaking: Dipped potion: 7-1. Solderability 2455C, 5.00.5sec Minimum 95% coverage Reflow soldering: Peak 260C max, 10sec, Twice max 7-2. Soldering Heat Soldering iron: Without looseness or crack etc. Resistance 3805C, 3+1/-0sec, Twice as one time for four pads 10cycles: 7-3. Temperature Cycle -55C to +125C (30minuts each/ cycle) 5 times 7-4. Mechanical 2 14,750m/sec (1,500G), Duration of pulse 0.5msec Shock (Pulse) (MIL-STD-883D-2002.3 Condition B) 4 times each axis X, Y, Z: Clause 7-10 shall be satisfied. 20 to 2,000Hz and 2,000Hz to 20Hz/cycle 7-5. Vibration Peak acceleration 196m/sec2 (20G) (MIL-STD-883D-2007.2 Condition A) 1000 hours: 7-6. High Temperature Temperature: 85+5/-3C 1000 hours: 7-7. Low Temperature Temperature: -40+5/-3C 10 cycles: 7-8. Humidity Cycle Based on 1004 specifications Clause 7-1 shall be satisfied. (MIL-STD-883D-1004.7) 7-9. Hermeticity 1 Soaking: No bubbles appeared (Gross leak) 125C, 5minutes 7-10. Hermeticity 2 Measured by Helium Detector Equipment 5x10-9 Pa m3/sec max (Fine leak) (MIL-STD-883D-1014.10 Condition A1) After each testing, the parts shall be subjected to standard atmospheric conditions more than 2 hours. After that, the electrical characteristics shall be measured. The result of the test shall be satisfied Table 1. Table 3 Doc.NO: EQM07-5OC-003AA0E-01 Drawing No. EQM08-5OC-00AG171-00 (4/5) 8. Recommended Land pattern and Soldering Guide 2.5 1.4 300 10sec max Peak 260 C max 2555 C 230 C 2.2 Temperature (C) 250 1.6 200 150 to 180 C 150 100 90 to 120 sec 50 Unit: (mm) Note: Since the part doesn't have Bypass Capacitor between Vcc and GND, Please mount high frequency type capacitor 0.01F to the nearest position of oscillator. 0 30 to 40sec Time (sec) Available reflow times: Maximum twice * Fig.5 Reflow profile (Lead Free) Fig.4 Land pattern 8-1.Soldering Iron Conditions z Tip temperature of soldering iron: 380C5C, Soldering time: 3sec+1/-0sec z Numbers of soldering iron: Maximum twice as one time for 4 pads 9. Taping Specifications P0 D0 T P2 W1 E E K W N F B0 KC CCG R16.000 A0 A D C P1 D1 W2 Unit: (mm) Symbol Dimensions Symbol Dimensions Symbol Dimensions A0 B0 W F E 3.70.1 5.50.1 12.00.3 5.50.05 1.750.1 D0 T P1 P2 P0 8.00.1 2.00.05 4.00.1 K D1 1.40.1 1.5+0.1/-0 1.5+0.1/-0 0.30.05 Symbol Dimensions Symbol Dimensions Symbol Dimensions Fig.6 Emboss Carrier Tape Unit: (mm) A N W1 180 +0/-3 60+1/-0 13.00.3 W2 C D 17.01.4 13.00.2 21.00.8 E 2.00.5 Fig.7 Reel 9-1. Taping Quantities * The taping of per reel shall be packed 1,000 pcs. * The parts shall be contained continuously in the pocket. 9-2. Leader and Blank Pockets * The package shall be consisted of leader, blank pockets and loaded pocket as follows "Fig. 8". * The power of peeling strength between top tape and carrier tape shall be 0.1N(10gf) to 0.7N(70gf) as follows "Fig. 9". Doc.NO: EQM07-5OC-003AA0E-01 Drawing No. EQM08-5OC-00AG171-00 (5/5) Top Tape D A) B) C) D) C B 165 to 180 Carrier Tape A Leader Blank Pockets (40mm to 320mm) A+B: 500mm to 560mm Load Pockets Blank Pocket (40mm min) Pulling Direction Fig.9 Peeling Strength Fig.8 Packing Method 9-3. Reel Label The reel label shall be consisted as below. (Based on EIAJ C-3 format) A) B) C) Customer Part Number Lot No. Quantities D) E) Shipping Date Vender Name 9-4. Exterior Package Label The oscillator shall be packed properly to avoid defect in transportation. The exterior package label shall be consisted as below. A) B) C) D) Name of Customer P/O No. Customer Part Number Lot No. E) F) G) Quantities Shipping Date Vender Name 10. Manufacturing Locations This part is produced on the following both locations. * KYOCERA Crystal Device PHILIPPINES, Inc. (Philippines) * KYOCERA Crystal Device Corporation Nagano Okaya Plant (Japan) 11. The agreement of this specifications If the something suspicious is that part of the contents of this specification, it shall be resolved by mutual deliberations. 12. Remarks on Usages A) Storage Conditions The parts shall be stored in temperature range of -5 to +40C, humidity 40 to 60% RH, and avoid direct sunlight. Then the parts shall be used within 6 months. B) Handling Conditions Although the part has protection circuit against static electricity, when excess static electricity is applied, the inside IC may get damaged. Before mounting on the PCB, please make sure the direction of the part is correct. Otherwise the part of temperature will increase. And also the part will have some damages. Please do not use the parts under the unfavorable condition such as beyond specified range in this specification. Please do not use the parts under the condition, in the water or in the salt water also environment of dew or harmful gas. C) Soldering Conditions This product can respond to the general Pb-free reflow profile. The wave soldering can not be supported. D) Washing Conditions Ultra sonic cleaning is available. However there is a possibility that Crystal in the part may cause damaged under certain condition. Therefore please test before using. After washing, please dry the parts completely. Otherwise water drops between the parts and PCB may cause migration. In case of using this part without above precaution, Kyocera is unable to guarantee the specific characteristics. Doc.NO: EQM07-5OC-003AA0E-01