* Qualified with 65kV/s @ common mode =1KV * Isolation 6.4kVDC * Optional continuous short circuit protection * Unique transformer system * Compact SIP7 package * /X2 version with >9mm input/output clearance * Very low isolation capacitance Features Unregulated Converters Description 2 Watt 3 SIP7 Single and Dual Output 3300 70 - 75 1200 RxxP209S (3,4) 5, 12, 15, 24 9 222 70 - 75 1200 RxxP212S (3,4) 5, 12,15, 24 12 167 70 - 75 680 5, 12, 15, 24 5 200 70 - 75 470 RxxP209D (3,4) 5, 12, 15, 24 9 111 70 - 75 470 5, 12,15, 24 12 83 70 - 75 330 RxxP215D (3,4) 5, 12, 15, 24 15 66 75 - 80 330 (3,4) Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max. Capacitive Load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter Model Numbering R__P2 __ _/P/X2 C O M CONVER T RoHS 2 + compliant M 10 from 10 PL U D IA N T PRO C O M CONVER y T S RxxP205D (3,4) R 1500 E 680 70 REACH compliant CO 75 - 80 S 133 300 R 15 3.3 E 5, 12, 15, 24 5, 12, 15, 24 CO RxxP23.3D (3,4) (3,4) M TS 70 400 C 600 5 RE 3.3 5, 12, 15, 24 TS 5, 12, 15, 24 RxxP205S (3,4) C RxxP23.3S (3,4) RE nom. Input Output Output Efficiency max. Capacitive Voltage VoltageCurrent typ. (1)Load (2) [VDC] [VDC][mA] [%] [F] arrant w Selection Guide Part Number RxxP212D RxxP2xx YEA R The RxxP2xxS_D series of DC/DC converters are certified to UL/CSA60950-1 and UL/CSA62368-1 as well as IEC/EN62368-1. This makes them ideal for safety applications where approved isolation is required. The /X2 version has an input/output clearance of more than 9mm. RxxP215S DC/DC Converter PL U D IA N T PRO E224736 IEC/EN62368-1 certified UL/CSA60950-1 certified UL/CSA62368-1 certified EN55032 compliant CB Report Input Voltage Output Power Output Voltage "Pinout (3)" "Protection (4)" Single or Dual Notes: Note3: add suffix /X2" for single output with alternative pinout Note4: add suffix /P" for continuous short circuit protection Ordering Examples: R05P205S/P = 5V Input, 5V Output, Single Output, Continuous Short Circuit Protection R05P23.3D/P = 5V Input, 3.3V Output, Dual Output, Continuous Short Circuit Protection R05P205S/P/X2 = 5V Input, 5V Output, Single Output, Continuous Short Circuit Protection, Alternative Pinout REF DESIGN available www.recom-power.com/eval-ref-boards www.recom-power.com REV.: 8/2020 dv/dt ADVISORY REPORT AVAILABLE www.recom-power.com/bier ECO-1 RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Minimum Load Internal Operating Frequency Output Ripple and Noise Max. 10% 0% 20kHz (5) 50kHz 85kHz 20MHz BW 200mVp-p Notes: Note5: Measurements are made with a 0.1F MLCC across output (low ESR) RxxP205S and RxxP209S RxxP205D and RxxP209D 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] Efficiency vs. Load 60 50 40 30 10 0 0 10 20 30 40 50 60 70 80 90 50 40 30 R05P205S and R12P205S R05P209S R12P209S 20 60 R05P205D and R12P205D R05P209D R12P209D 20 10 0 100 0 10 20 30 Output Load [%] 100 100 90 90 80 80 70 70 60 50 40 30 20 10 10 20 30 40 50 60 60 70 80 90 100 70 80 90 60 50 40 30 R05P212S R12P212S R05P215S R12P215S 0 50 RxxP212D and RxxP215D Efficiency [%] Efficiency [%] RxxP212S and RxxP215S 0 40 Output Load [%] R05P212D R12P212D R05P215D R12P215D 20 10 100 0 0 10 Output Load [%] 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy Line Regulation Load Regulation (6) 5.0% max. low line to high line, full load 10% to 100% load 3.3, 5VDC 9, 12, 15VDC 1.2%/1% of Vin typ. 15% typ. 10% typ. Notes: Note6: Operation below 10% load will not harm the converter, but specifications may not be met www.recom-power.com REV.: 8/2020 ECO-2 RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) Output Voltage [%] Tolerance Envelope +10% +5% +5% Typical L o ad Line Vnom -1.5% -5% 10 50 100 Load [%] Deviation vs. Load RxxP205D and RxxP209D 25 20 20 15 15 Deviation [%] Deviation [%] RxxP205S and RxxP209S 25 10 5 0 R05P205S R05P209S R12P205S R12P209S -5 -10 -15 0 10 20 30 10 5 0 R05P205D R05P209D R12P205D R12P209D -5 -10 40 50 60 70 80 90 -15 100 0 10 20 30 Output Load [%] 20 20 15 15 10 5 0 R05P212S R05P215S R12P212S R12P215S -10 -15 0 10 20 30 60 70 80 90 100 Output Load [%] www.recom-power.com 70 80 90 100 80 90 100 5 0 R05P212D R05P215D R12P212D R12P215D -10 50 60 10 -5 40 50 RxxP212D and RxxP215D 25 Deviation [%] Deviation [%] RxxP212S and RxxP215S 25 -5 40 Output Load [%] -15 0 10 20 30 40 50 60 70 Output Load [%] REV.: 8/2020 ECO-3 RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) PROTECTIONS Parameter Type without Suffix "/P" with Suffix "/P" Short Circuit Protection (SCP) Isolation Voltage Value I/P to O/P (7) 1 second continuous tested for 1 second 6.4kVDC rated for 1 minute 3.2kVAC/60Hz working voltage 250VACrms Isolation Resistance 15G min. Isolation Capacitance 1.5pF min. / 10pF max. Insulation Grade basic (IEC/EN/UL62368-1) Notes: Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: Refer to local safety regulations if input over-current protection is required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Condition Operating Temperature Range Value without derating @ free air convection (see graph) Maximum Case Temperature -40C to +95C +105C 2000m (IEC/EN/UL62368-1) 3000m (IEC/EN60601-1) Operating Altitude Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 MTBF +25C Single Dual 2113 x 10 hours 2434 x 103 hours +85C Single Dual 299 x 103 hours 334 x 103 hours according to MIL-HDBK-217F, G.B. 3 Derating Graph (@ Chamber and free air convection) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 95 Ambient Temperature [C] www.recom-power.com REV.: 8/2020 ECO-4 RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E224736-A56-UL Information Technology Equipment - General Requirements for Safety LVD1602031 Audio/video, information and communication technology equipment. Safety requirements E224736-A56-UL Audio/video, information and communication technology equipment. Safety requirements Standard UL60950-1, 2nd Edition, 2014 CAN/CSA C22.2 No. 60950-1, 2nd Edition, 2014 EN60950-1:2006 + A2:2013 IEC60950-1:2005 2nd Edition + A2:2013 UL62368-1, 2nd Edition, 2014 CAN/CSA C22.2 No. 62368-1, 2nd Edition, 2014 EN62368-1:2014 +A11:2017 ATTCB106076 Audio/video, information and communication technology equipment. Safety requirements (CB Scheme) IEC62368-1:2014, 2nd Edition Medical electrical equipment Part 1: General requirements for basic safety and essential performance EN60601-1:2006 + A12:2014 IEC60601-1:2005 + A1:2012, 3rd Edition WD-SE-R-180541-A0 EAC RU-AT.49.09571 TP TC 004/2011 RoHS2 RoHS-2011/65/EU + AM2015/863 EMC Compliance Electromagnetic compatibility of multimedia equipment Emission requirements Condition Standard / Criterion with external filter EN55032, Class A and B EMC Filtering Suggestions according to EN55032 Class A and Class B Component List Class A C3 C1 L1 +VIN 10F 100V MLCC +VOUT C1 C3 C3 - - Component List Class B C1 C2 C1 C2 L1 -V 10F 100V 10F 100V 12H choke IN C2 -VIN L1 +VIN L1 -VOUT MLCC MLCC WE 744 045 120 +VOUT COM C3 -VOUT 2n2F 8kV DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting PCB non-conductive black plastic, (UL94 V-0) epoxy, (UL94 V-0) FR4, (UL94 V-0) Package Dimension (LxWxH) 19.5 x 9.8 x 12.5mm Package Weight 4.3g typ. continued on next page www.recom-power.com REV.: 8/2020 ECO-5 RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) embossed logo 9.8 Pin Connection Pin # Single 1 +Vin 2 -Vin 5 -Vout 6 No Pin 7 +Vout Marking 0.51 12.5 19.5 0.250.05 4.10 0.50+0.10/-0.05 Dual +Vin -Vin -Vout Com +Vout /X2 +Vin -Vin No Pin -Vout +Vout Tolerance: xx.x= 0.5mm xx.xx= 0.25mm Recommended Footprint Details 3x2.54= 7.62 1.9 6 7 2.54 5 1 2 2.4 Bottom View 1 2 5 6 7 Top View 2.54 6x2.54= 15.24 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 22.3 x 12.0mm Packaging Quantity tube 25pcs Storage Temperature Range -55C to +125C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 8/2020 ECO-6