Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi2-Q10S-AN6X 10,4 LED 22,2 10,2 22,2 27,8 16 rectangular, height 10,2 mm side active face cable outlet to all sides possible plastic, PA12-GF20 3-wire DC, 10...30 VDC normally open npn output cable connection Wiring diagram npn Type Ident-No. Bi2-Q10S-AN6X 1619310 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 2 mm flush 3... 15 % 2 % 10 % -25 ...+ 70 C Rated operational voltage (DC) UB 10... 30 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 150 mA No-load current I0 15 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Output function Short-circuit protection Max. voltage drop at Ie 0,1 mA 2 kHz 0,5 kV 3-wire, normally open, NPN yes, cyclic 1,8 V Wire breakage / reverse polarity protection yes / complete Housing style Dimensions Housing material Active face Wiring Cable Cable cross section Vibration resistance Shock resistance Degree of protection rectangular; Q10S 27,8 x 16 x 10,2 mm plastic, PA12-GF20 plastic, PA12-GF20 cable O 4, LifYY-11Y, PUR, 2 m 3 x 0,25 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 Switching status indication LED yellow BU BN + BK Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi2-Q10S-AN6X Mounting instructions Gap D Gap W Gap S Gap G minimum gap 2xB 3 x Sn 1xB 6 x Sn Width of active face B 10,2 mm B G S D W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264