D- © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
series 28
HiPer-D Contacts and Tools
SEALING BOOT FOR COMBO HIPERD
Contact insertion and removal tools, sealing plugs, sealing boot
CONTACT INSERTION AND REMOVAL TOOLS
1 Insertion/Extraction Tool for #20 contacts.
This plastic tool features green insertion tip
and blue extraction tip. 2 Insertion/Extraction Tool for #22 contacts.
This plastic tool features green insertion tip
and white extraction tip.
3 Insertion/Extraction Tool for #8 Combo
HiPer-D contacts. This plastic tool features
yellow insertion tip and white extraction tip.
1
2
3
Figure Size Part Number Military Part Number
# M/-
# M/-
#* M/-
*Size 12 tool ts Combo HiPer-D size #8 connectors and contacts
GROMMET SEALING PLUGS FOR SIZE #22 AND #20HD CONNECTORS
Grommet sealing plugs are used to seal unwired contact cavities. These plugs conform
to MS27488 requirements. After installing unwired contacts into unused cavities, insert
knob end of sealing plug into grommet until it bottoms against the unwired contact
per illustration. Install sealing plugs with standard contact insertion/extraction tools .
Fig. Size Color
Part
Number
Military Part
Number
Insertion/
Removal Tool
A Ref. B Ref. C Ref. D Ref.
in. mm in. mm in. mm in. mm
# Black MS-- -
. . . . . . . .
# Red MS-- -D
. . . . . . . .
2
B
Ø A
Ø C
D
1
.535 (13.59)
Ø.240
(6.10)
Ø.210
(5.33)
Sealing boot prevents moisture and contamination from entering combo HiPer-D
connectors. Slide onto wire before terminating contact. Install contact into connector,
then slide sealing boot into connector grommet. Fluorosilicone grommet, thermoset
epoxy follower. -65C to +200C.
Wire Dia.
(in.)
Wire Dia.
(mm.)
Part
Number
. - . . - .
. - . . - .
. - . . - .
D
