Series AM10E-Z
10 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R12.B 1 of 4 North America only
FEATURES:
• RoHS compliant • Operating temperature -40oC to + 85oC
• Full SMD technology • Input/Output Isolation 1500VDC
• Wide 2:1 input range • Continuous short circuit protection
• High efficiency up to 86% • Low profile metal package
• Pin compatible with multiple manufacturers
Models
Single output
Model Input Voltage
(V)
Output Voltage
(V)
Output Current
max (A)
Capacitance
load, max
(μF)
Efficiency
(%)
AM10E-1203SZ 9-18 3.3 2 6800 78
AM10E-1205SZ 9-18 5 2 6800 83
AM10E-1207SZ 9-18 7.2 1.38 1000 82
AM10E-1209SZ 9-18 9 1.111 1000 84
AM10E-1212SZ 9-18 12 0.833 1000 85
AM10E-1215SZ 9-18 15 0.666 1000 84
AM10E-1218SZ 9-18 18 0.55 470 84
AM10E-1224SZ 9-18 24 0.416 470 85
AM10E-2403SZ 18-36 3.3 2 6800 78
AM10E-2405SZ 18-36 5 2 6800 83
AM10E-2407SZ 18-36 7.2 1.38 1000 83
AM10E-2409SZ 18-36 9 1.111 1000 83
AM10E-2412SZ 18-36 12 0.833 1000 85
AM10E-2415SZ 18-36 15 0.666 1000 86
AM10E-2418SZ 18-36 18 0.55 470 86
AM10E-2424SZ 18-36 24 0.416 470 86
AM10E-4803SZ 36-72 3.3 2 6800 78
AM10E-4805SZ 36-72 5 2 6800 84
AM10E-4807SZ 36-72 7.2 1.38 1000 84
AM10E-4809SZ 36-72 9 1.111 1000 84
AM10E-4812SZ 36-72 12 0.833 1000 86
AM10E-4815SZ 36-72 15 0.666 1000 85
AM10E-4818SZ 36-72 18 0.55 470 85
AM10E-4824SZ 36-72 24 0.416 470 85
Models
Dual output
Model Input Voltage
(V)
Output Voltage
(V)
Output Current
max (A)
Capacitance
load, max
(μF)
Efficiency
(%)
AM10E-0505DZ 4.5-9 ±5 ±700 ±1000 77
AM10E-1203DZ 9-18 ±3.3 ±1 ±3300 78
AM10E-1205DZ 9-18 ±5 ±1 ±3300 83
AM10E-1207DZ 9-18 ±7.2 ±0.69 ±680 80
AM10E-1209DZ 9-18 ±9 ±0.555 ±680 80
AM10E-1212DZ 9-18 ±12 ±0.416 ±680 85
AM10E-1215DZ 9-18 ±15 ±0.333 ±330 85
AM10E-1218DZ 9-18 ±18 ±0.27 ±220 80
AM10E-1224DZ 9-18 ±24 ±0.208 ±220 85
AM10E-2403DZ 18-36 ±3.3 ±1 ±3300 78
AM10E-2405DZ 18-36 ±5 ±1 ±3300 84
Series AM10E-Z
10 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R12.B 2 of 4 North America only
Models
Dual output (continued)
Model Input Voltage
(V)
Output Voltage
(V)
Output Current
max (A)
Capacitance
load, max
(μF)
Efficiency
(%)
AM10E-2407DZ 18-36 ±7.2 ±0.69 ±680 80
AM10E-2409DZ 18-36 ±9 ±0.555 ±680 80
AM10E-2412DZ 18-36 ±12 ±0.416 ±680 85
AM10E-2415DZ 18-36 ±15 ±0.333 ±330 86
AM10E-2418DZ 18-36 ±18 ±0.27 ±220 80
AM10E-2424DZ 18-36 ±24 ±0.208 ±220 85
AM10E-4803DZ 36-72 ±3.3 ±1 ±3300 78
AM10E-4805DZ 36-72 ±5 ±1 ±3300 85
AM10E-4807DZ 36-72 ±7.2 ±0.69 ±680 80
AM10E-4809DZ 36-72 ±9 ±0.555 ±680 80
AM10E-4812DZ 36-72 ±12 ±0.416 ±680 86
AM10E-4815DZ 36-72 ±15 ±0.333 ±330 86
AM10E-4818DZ 36-72 ±18 ±0.27 ±220 80
AM10E-4824DZ 36-72 ±24 ±0.208 ±220 85
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters Nominal Typical Maximum Units
5 4.5–9
12 9-18
24 18-36
Voltage range
48 36-72
VDC
Filter π(PI )
Turn on Transient process time 350 ms
Start up time 20 ms
5 Vin -0.7-15
12 Vin -0.7-24
24 Vin -0.7-40
Absolute Maximum Rating
48 Vin -0.7-80
VDC
Peak Input Voltage time 100 ms
No Load Input Current 70 mA
Input reflected current 35 mAp-p
Isolation Specifications
Parameters Conditions Typical Maximum Units
Tested I/O voltage 3 sec 1500 VDC
Resistance > 1000 MOhm
Capacitance 500 pF
Output Specifications
Parameters Conditions Typical Maximum Units
Voltage accuracy ±1 %
Voltage balance (Dual Output) Balance Load ±1 %
Cross Regulation (Dual Output) 25% load on one output -
100% load on second load ±5 %
Short Circuit protection Continuous
Series AM10E-Z
10 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R12.B 3 of 4 North America only
Output Specifications (continued)
Parameters Conditions Typical Maximum Units
Short circuit restart Auto Recovery
Over load protection 140 %
Line voltage regulation (Single) HL-LL ±0.5 %
Line voltage regulation (Dual) HL-LL ±0.5 %
Load voltage regulation (Single) 10-100% ±0.5 %
Load voltage regulation (Dual) 10-100% ±1.0 %
Temperature coefficient ±0.02 % oC
Ripple & Noise 20MHz Bandwidth 100 mVp-p
Rising time 10 ms
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 200 KHz
-5Vin -40 to +65
Operating temperature 12, 24, 48 Vin -40 to +85
oC
Storage temperature -55 to +125 oC
Maximum case temperature 100 oC
5Vin See Graph
Derating 12, 24, 48 Vin Not Required
Cooling Free air convection
Humidity 95 %
Case material Nickel coated copper
Potting Material UL94V-0 rated
Weight 30 g
Dimensions (L x W x H) Tolerance ±0.5mm 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm
5Vin: 1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)
MTBF 12, 24, 48 Vin: > 1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)
Maximum soldering temperature 1.5mm from case max 10 sec 260 oC
Transient recovery time 250 uS
Transient recovery deviation ±3 %
Safety Specifications for models with 12, 24, and 48 Vin
Parameters
Agency approvals CE
EN 55022 (Radiated) – Class A
EN 55024 – Class A
IEC61000-4-2
IEC61000-4-3
Standards
NOTE: Meets IEC60950-1:2001
Pin Out Specifications
Pin Single Dual
1 +V Input +V Input
2 -V Input -V Input
3 +V Output +V Output
4 No Pin. Common.
5 -V Output -V Output
Series AM10E-Z
10 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R12.B 4 of 4 North America only
Dimensions
Derating - 5Vin Model
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. Aimtec may not have conducted destructive testing or chemical analysis on all internal
components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release.
5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which
necessitate specific safety and regulatory standards other the ones listed in this datasheet.
5.08
(0.20)
Min
Notes:
All dimensions are typical
in millimeters (inches).
Tolerance ±0.25 (±0.01)
1
2
3
4
5
Bottom View
DIA
1.00
(0.04)
20.32
(0.80)
15.24
(0.60)
15.24
(0.60)
10.16
(0.40)
10.16
(0.40)
5.08
(0.20)
10.16
(0.40)
10.16
(0.40)
2.54
(0.10)
2.54
(0.10)
50.80
(2.00)
25.40
(1.00)
10.16
(0.40)
Built-in Stand-offs to
ease PCB cleaning
