DISCRETE SEMICONDUCTORS DATA SHEET handbook, 2 columns M3D116 1N4001G to 1N4007G Rectifiers Product specification Supersedes data of April 1992 1996 May 24 Philips Semiconductors Product specification Rectifiers 1N4001G to 1N4007G FEATURES DESCRIPTION * Glass passivated Rugged glass package, using a high temperature alloyed construction. * High maximum operating temperature * Low leakage current * Excellent stability 2/3 page k(Datasheet) * Available in ammo-pack. This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. a MAM047 Fig.1 Simplified outline (SOD57) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VRRM VR PARAMETER CONDITIONS MIN. MAX. 1N4001G - 50 V 1N4002G - 100 V repetitive peak reverse voltage 1N4003G - 200 V 1N4004G - 400 V 1N4005G - 600 V 1N4006G - 800 V 1N4007G - 1000 V - 50 V continuous reverse voltage 1N4001G IF(AV) UNIT 1N4002G - 100 V 1N4003G - 200 V 1N4004G - 400 V 1N4005G - 600 V 1N4006G - 800 V 1N4007G - 1000 V average forward current averaged over any 20 ms period; Tamb = 75 C; see Fig.2 - 1.00 A averaged over any 20 ms period; Tamb = 100 C; see Fig.2 - 0.75 A Tamb = 75 C; see Fig.2 - 1.00 A IF continuous forward current IFRM repetitive peak forward current IFSM non-repetitive peak forward current Tstg storage temperature -65 +175 C Tj junction temperature -65 +175 C 1996 May 24 half sinewave; 60 Hz 2 - 10 A - 30 A Philips Semiconductors Product specification Rectifiers 1N4001G to 1N4007G ELECTRICAL CHARACTERISTICS Tj = 25 C; unless otherwise specified. SYMBOL PARAMETER CONDITIONS MAX. UNIT VF forward voltage IF = 1 A; see Fig.3 1.1 V VF(AV) full-cycle average forward voltage IF(AV) = 1 A 0.8 V IR reverse current IR(AV) full-cycle average reverse current VR = VRmax 10 A VR = VRmax; Tamb = 100 C 50 A VR = VRRMmax; Tamb = 75 C 30 A THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS Rth j-tp thermal resistance from junction to tie-point lead length = 10 mm Rth j-a thermal resistance from junction to ambient note 1 VALUE UNIT 46 K/W 100 K/W Note 1. Device mounted on epoxy-glass printed-circuit board, 1.5 mm thick; thickness of copper 40 m, see Fig.4. For more information please refer to the "General Part of associated Handbook". 1996 May 24 3 Philips Semiconductors Product specification Rectifiers 1N4001G to 1N4007G GRAPHICAL DATA MBH385 10 handbook, halfpage MBH386 1.5 handbook, halfpage IF (A) IF (A) 1 1 0.5 (1) (2) (3) 10-1 0 0.5 0 0 Fig.2 100 Tamb (C) 1.5 (1) Tamb = 100 C. (2) Tamb = 20 C. (3) Tamb = -50 C. Fig.3 50 25 7 50 2 3 MGA200 Dimensions in mm. Fig.4 Device mounted on a printed-circuit board. 1996 May 24 VF (V) 200 Maximum forward current as a function of ambient temperature. handbook, halfpage 1 4 Forward current as a function of forward voltage; typical values. Philips Semiconductors Product specification Rectifiers PACKAGE OUTLINE handbook, full pagewidth k 3.81 max 28 min Dimensions in mm. , 4.57 max 1N4001G to 1N4007G a 28 min 0.81 max MBC880 Fig.5 SOD57. DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1996 May 24 5