FDS6679 Rev C1 (W)
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Typ Max Units
Off Characteristics
BVDSS Drain–Source Breakdown Voltage VGS = 0 V, ID = –250 µA –30 V
∆BVDSS
∆TJ Breakdown Voltage Temperature
Coefficient ID = –250 µA, Referenced to 25°C –23
mV/°C
IDSS Zero Gate Voltage Drain Current VDS = –24 V, VGS = 0 V –1 µA
IGSS Gate–Body Leakage VGS = ±25 V, VDS = 0 V ±100 nA
On Characteristics (Note 2)
VGS(th) Gate Threshold Voltage VDS = VGS, ID = –250 µA –1 –1.6 –3 V
∆VGS(th)
∆TJ Gate Threshold Voltage
Temperature Coefficient ID = –250 µA, Referenced to 25°C
5
mV/°C
RDS(on) Static Drain–Source
On–Resistance VGS = –10 V, ID = –13 A
VGS = –4.5 V, ID = –11 A
VGS=–10 V, ID =–13 A, TJ=125°C
7.3
10
9.5
9
13
13
mΩ
ID(on) On–State Drain Current VGS = –10 V, VDS = –5 V –50 A
gFS Forward Transconductance VDS = –5 V, ID = –13 A 44 S
Dynamic Characteristics
Ciss Input Capacitance 3939 pF
Coss Output Capacitance 972 pF
Crss Reverse Transfer Capacitance
VDS = –15 V, V GS = 0 V,
f = 1.0 MHz 498 pF
Switching Characteristics (Note 2)
td(on) Turn–On Delay Time 19 34 ns
tr Turn–On Rise Time 10 20 ns
td(off) Turn–Off Delay Time 110 176 ns
tf Turn–Off Fall Time
VDD = –15 V, ID = –1 A,
VGS = –10 V, RGEN = 6 Ω
65 104 ns
Qg Total Gate Charge 71 100 nC
Qgs Gate–Source Charge 12 nC
Qgd Gate–Drain Charge
VDS = –15 V, ID = –13 A,
VGS = –10 V
15 nC
Drain–Source Diode Characteristics and Maximum Ratings
IS Maximum Continuous Drain–Source Diode Forward Current –2.1 A
VSD Drain–Source Diode Forward
Voltage VGS = 0 V, IS = –2.1 A (Note 2) –0.7 –1.2 V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of
the drain pins. RθJC is guar ante ed by design whil e RθCA is determined by the user's board design.
a) 50°C/W (10 sec)
62.5°C/W steady state
when mounted on a
1in2 pad of 2 oz
copper
b) 105°C/W when
mounted on a .04 in2
pad of 2 oz copper
c) 125°C/W when mounted on a
minimum pad.
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%
FDS6679