8 A Standard Recovery Surface Mount Rectifiers FS8G - FS8M Description The FS8G to FS8M series offers breakthrough size and performance. It sinks 8 A DC forward current and provides up to 230 A surge current capability with only 0.37 mA reverse leakage current. All this capability is packed into a small, flat-lead, TO-277 package, optimized for space-constrained applications. www.onsemi.com Anode 1 3 Cathode Features * * * * * * * * Anode 2 Rectifier Very High forward Surge Capability: IFSM = 230 A Low Leakage Current: 0.37 mA at TA = 25C Very Low Profile: Typical Height of 1.1 mm Glass Passivated Junction HBM (JEDEC A114) > 8 KV; CDM (JEDEC C101C) > 2 KV Green Molding Compound as per IEC61249 Standard With DAP Option Only These Devices are Pb-Free, Halogen Free Free and are RoHS Compliant 3 2 1 TO-277-3LD CASE 340BQ MARKING DIAGRAM Applications * General-Purpose Applications * Reverse Polarity Protection * Rectifications $Y&Z&3 * $Y &Z &3 * = ON Semiconductor Logo = Assembly Plant Code = Date Code (Year & Week) = Specific Device Code FS8G, FS8J, FS8K, FS8M ORDERING INFORMATION See detailed ordering and shipping information on page 3 of this data sheet. (c) Semiconductor Components Industries, LLC, 2015 April, 2020 - Rev. 5 1 Publication Order Number: FS8M/D FS8G - FS8M ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Value Symbol Rating FS8G FS8J FS8K FS8M Unit 600 800 1000 V VRRM Maximum Repetitive Peak Reverse Voltage 400 VRMS Maximum RMS Reverse Voltage 280 420 560 700 V VDC DC Blocking Voltage 400 600 800 1000 V IF(AV) Maximum Average Rectified Forward Current IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine-Wave Superimposed on Rated Load TJ TSTG 8 A 230 A Operating Junction Temperature Range -55 to +150 C Storage Temperature Range -55 to +150 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Note 1) Symbol Characteristic Minimum Land Pattern Maximum Land Pattern Unit RqJA Junction-to-Ambient Thermal Resistance 100 40 C/W JL Junction-to-Lead Thermal Characteristics, Thermocouple Soldered to Anode 20 12 C/W Junction-to-Lead Thermal Characteristics, Thermocouple Soldered to Cathode 6 5 1. The thermal resistances (RqJA & JL) are characterized with device mounted on the following FR4 printed circuit boards, as shown in Figure 1 and Figure 2. PCB size: 76.2 x 114.3 mm. Minimum land pattern size: 4.9 x 4.8 mm (big pattern, x1), 1.4 x 1.52 mm (small pattern, x2). Maximum land pattern size: 30 x 30 mm (pattern, x2). Force line trace size = 55 mils, sense line trace size = 4 mils. F S F S F S F S F S Figure 1. Minimum Land Pattern of 2 oz Copper Figure 2. Maximum Land Pattern of 2 oz Copper ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol VF Parameter Forward Voltage Conditions IF = 8 A Min Typ Max Unit - 0.951 1.1 V 5 mA IF = 8 A, TA = 125C IR DC Reverse Current 0.845 - VR = VDC VR = VDC, TA = 125C 0.37 84 Trr Reverse Recovery Time IF = 0.5 A, IR = 1 A, Irr = 0.25 A 3.37 ms CJ Junction Capacitance VR = 0 V, f = 1 MHz 118 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 FS8G - FS8M ORDERING INFORMATION Part Number Top Mark Package Shipping FS8G FS8G TO-277 3L (No DAP Option) (Pb-Free/Halogen Free) 5000 / Tape & Reel FS8J FS8J TO-277 3L (No DAP Option) (Pb-Free/Halogen Free) 5000 / Tape & Reel FS8K FS8K TO-277 3L (No DAP Option) (Pb-Free/Halogen Free) 5000 / Tape & Reel FS8M FS8M TO-277 3L (No DAP Option) (Pb-Free/Halogen Free) 5000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 3 FS8G - FS8M TYPICAL PERFORMANCE CHARACTERISTICS 1000 TL (Cathode, Min. Pad) 8 CJ, Junction Capacitance (pF) IF, Average Forward Current (A) 9 7 6 5 TA (3 cm x 3 cm Pad) 4 3 TA (Min. Pad) 2 1 100 0 0 25 50 75 100 150 10 0.1 175 1 10 100 Ambient / Lead Temperature (5C) VR, Reverse Voltage (V) Figure 3. Forward Current Derating Curve Figure 4. Typical Junction Capacitance 1000 TA = 150C TA = 75C 100 TA = 125C 10 TA = 75C 1 0.1 10 IF, Forward Current (A) IR, Reverse Current (mA) 125 TA = 25C 0.01 TA = 125C TA = 150C TA = 25C TA = -55C TA = -55C 1E-3 0 1 0.5 100 200 300 400 500 600 700 800 900 1000 0.7 0.8 0.9 1.0 1.1 1.2 VR, Reverse Voltage (V) VF, Forward Voltage (V) Figure 5. Typical Reverse Characteristics Figure 6. Typical Forward Characteristics 300 10000 IFSM, Non-Repetitive Forward Surge Current (A) Peak Forward Surge Current (A) 0.6 250 200 150 100 50 0 1 10 1000 100 100 10 Number of Cycles 100 1000 10000 Tp, Square Waveform Pulse Duration (ms) NOTE: Figure 7. Maximum Non-Repetitive Peak Forward Surge Current Typical performance bases on a limited sample size, not guarantee rating. Figure 8. Typical Non-Repetitive Forward Surge Current www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO-277-3LD CASE 340BQ ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13861G TO-277-3LD DATE 30 SEP 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative