Performance Symbol Min Nom Max Unit
Optical Sensitivity 223 -1 BER< 10-10 (4), m=10 Sens -26.5 -25 dBm
High frequency -3dB corner (2), m=10 F3dB 7.5 8.1 GHz
Deviation from linear phase (d.c-6GHz) -10 +10 deg
Return loss S22 (400KHz to 12GHz) -12 -5 dB
Optical overload 223 -1 BER< 10-10 Psat -3 -1 dBm
APD breakdown voltage temp coefficient Tvbr .050 0.056 .061 V/°C
APD breakdown voltage Vbr 25 40 V
Amplifier bias voltage (Positive) Vcc 7.6 8 8.4 V
Dark current at 90% of Vbr ld 100 nA
Current consumption lcc 110 120 mA
Transimpendance gain (2,3) TZG 400 500 650 Ohms
Characteristics
TC = 25 °C unless otherwise specified.
1) Optical wavelength is in the 1300nm region and between 1525 - 1575nm
2) Load impedance is 50Ω(AC coupled) with a return loss > 20dB, up to 20GHz.
3) Excludes APD responsivity.
4) Measured with 10 Gb/s NRZ PRBS data and no FEC.
Parameter Symbol Min Max Unit
Amplifier bias voltage Vcc -0.5 8.5 V
Operating temperature (1) Top 0 70 °C
Storage temperature (2) Tstg -40 85 °C
Maximum Transient Optical Input Power Ppo 10 dBm
APD bias voltage Vbr 40 V
Fibre bend radius 35 mm
Absolute Maximum Ratings
Class 1 ESD precautions must be observed when handling these devices
1) The operating temperature is defined as the temperature of the module case.
2) The rating is referred to ambient temperature.
3) The optical level that causes no damage to the module. However, the electrical and optical performance
specified in this document may not be guaranteed.
4) The receiver may be damaged if not powered up and powered down in the correct order. When powering
up the device, turn on APD bias (Vapd) first, then positive supply (Vcc). Power down in reverse order.
5) Vbr of individual device at given operating temperature is not to be exceeded.
Pin # Function
1 Vapd (+ve)
2 Case ground
3 Vcc (+ve)
4 Case Ground
5 Case Ground
6 Case Ground
7 Case Ground
8 Thermistor
NTC thermistor R25 °C = 10K Ω+/- 3%
www.bookham.com Thinking optical solutionswww.bookham.com Thinking optical solutions