CP
233
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2013 Eaton’s Crouse-Hinds Business
Applications:
• For use with nonmetallic Type B
liquidtight conduit to terminate and seal
conduit to liquidtight, oiltight, or raintight
box or enclosure.
• Typical applications include wiring
motors, transformers, processing
equipment, pumps, etc.
Standard Materials:
• Body – Nylon
• Locknut – Steel
LT38NM LT38NMBL
LT3890NM LT3890NMBL
Liquidtight Conduit Fittings
Non-Metallic Liquidtight Fittings
NON-METALLIC LIQUIDTIGHT
CONDUIT FITTINGS
Cat. # Cat. # Trade Size
Unit
Qty. Certification
Wt. Lbs.
Per 100 A B C
STRAIGHT
GRAY BLACK
LT38NM LT38NMBL 3/8" 25 cULus 5 2.00" 0.54" 1.40"
LT50NM LT50NMBL 1/2" 25 cULus 5 2.00" 0.54" 1.40"
LT75NM LT75NMBL 3/4" 10 cULus 7 2.20" 0.64" 1.70"
LT100NM LT100NMBL 1" 5 cULus 14 2.28" 0.74" 2.00"
LT125NM LT125NMBL 11/4" 5 cULus 20 2.44" 0.76" 2.4"
LT150NM LT150NMBL 11/2" 2 cULus 30 2.70" 0.80" 2.67"
LT200NM LT200NMBL 2" 2 cULus 40 2.99" 0.85" 3.28"
90° ANGLE
GRAY BLACK
LT3890NM LT3890NMBL 3/8" 10 cULus 5 2.12" 0.54" 3.12"
LT5090NM LT5090NMBL 1/2" 10 cULus 5 2.12" 0.54" 3.12"
LT7590NM LT7590NMBL 3/4" 10 cULus 10 2.50" 0.52" 3.60"
LT10090NM LT10090NMBL 1" 5 cULus 16 3.13" 0.70" 4.13"
LT12590NM LT12590NMBL 11/4" 5 cULus 28 4.45" 0.76" 5.20"
LT15090NM LT15090NMBL 11/2" 2 cULus 40 4.75" 0.80" 5.20"
LT20090NM LT20090NMBL 2" 2 cULus 50 5.42" 0.86" 5.80"
Features:
• Liquidtight, Raintight Oiltight
• Furnished with locknut and sealing ring
• Corrosion resistant
• Suitable for wet locations
• No-Spin ferrule
• 90° has smooth interior to prevent
abrasion of conductors
• Molded of Type Nylon 6
• Flammability classification 94V-2;
temperature index of -18°C to 125°C
• No disassembly required
• No threading of conduit or tubing
required to install
• Rubber o-ring gasket
229-236.qxp 12/16/2013 4:05 PM Page 233
CP
234
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2013 Eaton’s Crouse-Hinds Business
MULTI-ANGLE
CONNECTORS
LT50U90NM
Features:
• Swivel design can change from a 0
degree to a 90 degree angle
• No disassembly required
• Eliminate inventory by using the swivel
design as a straight or 90 degree
connector
Cat. # Trade Size
Unit
Qty. Certification
Wt. Lbs.
Per 100 A B C
LT50U90NM 1/2" 10 cULus 10 Pos 1 = 3.350" /
Pos 2 = 3.025"
Pos 1 = 2.15" /
Pos 2 = 2.395"
Pos 1 = .5" /
Pos 2 = .5
LT75U90NM 3/4" 10 cULus 15 Pos 1 = 4.30" /
Pos 2 = 3.850"
Pos 1 = 2.65" /
Pos 2 = 3.350"
Pos 1 = .520" /
Pos 2 = .520
SCREW ON CONNECTORS
LT50NMSCR LT5090NMSCR
Features:
• 1 piece design
• Design allows for excellent liquidtight
seal and optimum pull strength without
compression nut
Cat. # Trade Size
Unit
Qty. Certification
Wt. Lbs.
Per 100 A B C
STRAIGHT CONNECTOR
LT50NMSCR 1/2" 25 cULus 5 1.750" 0.500" 1.250"
LT75NMSCR 3/4" 25 cULus 7 1.800" 0.625" 1.500"
90° ANGLE CONNECTOR
LT5090NMSCR 1/2" 10 cULus 7 1.875" 0.500" 3.125"
LT7590NMSCR 3/4" 10 cULus 9 2.375" 0.625" 3.500"
LIQUIDTIGHT WHIPS
Features:
• Available in 1/2" and 3/4" conduit size
• 4 FT and 6 FT lengths
• Easy installation
• Assembled with all UL components
• Resists corrosion, oil and water
•1/2" filled with three #10 AWG THHN
copper stranded wire
•3/4" filled with one #10 AWG THHN
copper stranded wire and two #8 AWG
THHN copper stranded wire
LTWHP50NM4
Cat. # Trade Size
Unit
Qty. Certification
Wt. Lbs.
Per 100
4 FOOT
LTWHP50NM4 1/2" 24 Listed Components 138
LTWHP75NM4 3/4" 24 Listed Components 188
6 FOOT
LTWHP50NM6 1/2" 24 Listed Components 196
LTWHP75NM6 3/4" 12 Listed Components 267
Liquidtight Conduit Fittings
Non-Metallic Liquidtight Fittings
229-236.qxp 12/16/2013 4:05 PM Page 234
CP
235
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2013 Eaton’s Crouse-Hinds Business
Applications:
• For use with nonmetallic liquidtight fittings to terminate and seal
conduit to liquidtight, oiltight, or raintight box or enclosure.
• Typical applications include wiring motors, transformers,
processing equipment, pumps, etc.
Standard Materials:
• Integral rigid and flexible PVC construction
UL TYPE B FLEXIBLE, NON-METALLIC LIQUIDTIGHT CONDUIT
LTCOND38NM100 - GRAY LTCOND38NMBL100 - BLACK
NON-METALLIC LIQUIDTIGHT ELECTRICAL TUBING
ET25NM100
Features:
• Quick installation. Cuts with utility knife or PVC cutter
• Suitable for use in high vibration or flexing applications
• Resists corrosion, oil and water
• Maximum flexibility. Can be used in extremely tight areas
• Resists abuse, pulling and crushing
Cat. # Trade Size Certification
Wt. Lbs.
Per 100 Ft.
Coil /
Reel Size O.D. Min - Max I.D. Min - Max
Non-Metallic Electrical Tubing
ET25NM100 1/4" UL 8 100 FT .560 - .575" .385 - .405"
ET38NM100 3/8" UL and CSA 9 100 FT .690 - .710" .484 - .504"
ET50NM100 1/2" UL and CSA 10 100 FT .820 - .840" .622 - .642"
ET75NM100 3/4" UL and CSA 14 100 FT 1.030 - 1.050" .820 - .840"
ET100NM100 1" UL and CSA 19 100 FT 1.290 - 1.315" 1.041 - 1.066"
ET125NM100 11/4" UL and CSA 22 100 FT 1.630 - 1.660" 1.380 - 1.410"
ET150NM50 11/2" UL and CSA 28 50 FT 1.865 - 1.900" 1.575 - 1.600"
ET200NM50 2" UL and CSA 42 50 FT 2.340 - 2.375" 2.020 - 2.045"
Liquidtight Conduit Fittings
Non-Metallic Liquidtight Fittings
Cat. # Cat. #
Trade
Size Certification
Wt. Lbs.
Per 100 Ft.
Coil /
Reel Size O.D. Min - Max I.D. Min - Max
Type B 80°C Dry 60°C
Wet 70°C - GRAY
Type B 105°C Dry 60°C
Wet 70°C - BLACK
LTCOND38NM100 LTCOND38NMBL100 3/8" UL and CSA 13 100 FT .690 - .710" .484 - .504"
LTCOND50NM100 LTCOND50NMBL100 1/2" UL and CSA 15 100 FT .820 - .840" .622 - .642"
LTCOND75NM100 LTCOND75NMBL100 3/4" UL and CSA 20 100 FT 1.030 - 1.050" .820 - .840"
LTCOND100NM100 LTCOND100NMBL100 1" UL and CSA 27 100 FT 1.290 - 1.315" 1.041 - 1.066"
LTCOND125NM100 LTCOND125NMBL100 11/4" UL and CSA 35 100 FT 1.630 - 1.660" 1.380 - 1.410"
LTCOND150NM50 LTCOND150NMBL50 11/2" UL and CSA 46 50 FT 1.865 - 1.900" 1.575 - 1.600"
LTCOND200NM50 LTCOND200NMBL50 2" UL and CSA 66 50 FT 2.340 - 2.375" 2.020 - 2.045"
LTCOND38NM1200 3/8" UL and CSA 14 1200 FT .690 - .710" .484 - .504"
LTCOND50NM1000 1/2" UL and CSA 17 1000 FT .820 - .840" .622 - .642"
LTCOND75NM800 3/4" UL and CSA 22 800 FT 1.030 - 1.050" .820 - .840"
LTCOND100NM500 1" UL and CSA 30 500 FT 1.290 - 1.315" 1.041 - 1.066"
Features:
• Resists abrasion, oil, water, acid and metal shavings
• Smooth inside for easier wire pulling, no hazardous sharp edges or
burrs, will not damage conductors
• Corrosion resistant for tough environmental conditions
• Suitable for wet locations
• Quick installation, cuts with utility knife or PVC cutter
• 90° has smooth interior to prevent abrasion of conductors
• Rated for 80°C dry, 60°C wet, 70°C oil-resistant
229-236.qxp 12/16/2013 4:05 PM Page 235
