2N2484HR Hi-Rel NPN bipolar transistor 60 V, 50 mA Datasheet - production data Features 1 Parameter Value BVCEO 60 V IC (max) 50 mA hFE at 10 V - 150 mA > 250 Operating temperature range - 65 C to + 200 C 2 3 TO-18 3 3 4 1 1 2 2 * Linear gain characteristics LCC-3UB LCC-3 * Hermetic packages Figure 1. Internal schematic diagram * ESCC qualified * European preferred part list - EPPL Description The 2N2484HR is a silicon planar epitaxial NPN transistor specifically designed for aerospace HiRel applications and housed in hermetic packages. It complies with the ESCC 5000 qualification standard. It is ESCC qualified according to the 5201-001 specification. In case of conflict between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order codes ESCC Part number Quality Level Packages Lead Finish Mass (g) EPPL 2N2484UB1 - Engineering Model LCC-3UB Gold 0.06 - 2N2484UB06 5201/001/06 ESCC Flight LCC-3UB Gold 0.06 - 2N2484UB07 5201/001/07 ESCC Flight LCC-3UB Solder Dip 0.06 - SOC2484 - Engineering Model LCC-3 Gold 0.06 - SOC2484HRB 5201/001/04 or 05 ESCC Flight LCC-3 Gold / Solder Dip (1) 0.06 - 2N2484HR 5201/001/01or 02 ESCC Flight TO-18 Gold / Solder Dip (1) 0.40 Y 1. Depending ESCC part number mentioned on the purchase order. February 2013 This is information on a product in full production. DocID17734 Rev 2 1/14 www.st.com 14 Contents 2N2484HR Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/14 DocID17734 Rev 2 2N2484HR 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) 60 V VCEO Collector-emitter voltage (IB = 0) 60 V VEBO Emitter-base voltage (IC = 0) 6 V Collector current 50 mA 2N2484HR 0.36 W 2N2484UB1 / SOC2484HRB 0.36 W 2N2484UB1 / SOC2484HRB (1) 0.73 W 2N2484HR 1.2 W - 65 to 200 C 200 C TO-18 Unit IC PTOT Total dissipation at Tamb 25 C PTOT Total dissipation at Tc 25 C TSTG Storage temperature TJ Max. operating junction temperature 1. When mounted on a 15 x 15 x 0.6 mm ceramic substrate. Table 3. Thermal data for through-hole package Symbol Parameter RthJC Thermal resistance junction-case max 146 C/W RthJA Thermal resistance junction-ambient max 486 C/W Table 4. Thermal data for SMD package Symbol RthJA Parameter LCC-3 LCC-3UB Thermal resistance junction-ambient max 486 Thermal resistance junction-ambient (1) max 239 Unit C/W 1. When mounted on a 15 x 15 x 0.6 mm ceramic substrate. DocID17734 Rev 2 3/14 Electrical characteristics 2 2N2484HR Electrical characteristics Tcase = 25 C unless otherwise specified. Table 5. Electrical characteristics Symbol Parameter V(BR)CBO Collector-base breakdown voltage V(BR)CEO (2) Test conditions (1) Min. Typ. IC = 10 A 60 - V Collector-emitter breakdown voltage IC = 10 mA 60 - V V(BR)EBO Emitter-base breakdown voltage IE = 10 A 6 - V ICBO Collector-base cutoff current VCB = 45 V ICBO VCE(sat) (2) hFE (2) Unit - 10 nA Emitter-base cut-off VEB = 5 V current - 10 nA Collector-emitter saturation voltage - 0.35 V DC forward current transfer ratio IC = 1 mA, IB = 0.1 mA IC = 1 A, VCE = 5 V 30 IC = 10 A, VCE = 5 V 100 IC = 100 A, VCE = 5 V 175 IC = 1 mA, VCE = 5 V 250 500 - 550 650 IC = 10 mA, VCE = 5 V 800 High frequency current Gain 1 VCE = 5 V, IC = 50 A, f = 5 MHz 3 High frequency current Gain 2 VCE = 5 V, IC = 500 A, f = 30 MHz 2 Cobo Output capacitance VCB = 5 V, IE = 0, f = 1 MHz - 6 pF Cibo Input capacitance VEB = 0.5 V, IC = 0, f = 1 MHz - 6 pF hFE Small signal current IC = 1 mA, VCE = 5 V, f = 1 kHz gain 150 - 900 hie Small signal input impedance IC = 1 mA, VCE = 5 V, f = 1 kHz 3.5 - 24 k hoc Small signal output impedance IC = 1 mA, VCE = 5 V, f = 1 kHz - 40 hre Small signal reverse voltage transfer ratio IC = 1 mA, VCE = 5 V, f = 1 kHz - 800 10-6 Wide-Band noise VCE = 5 V, IC = 10 A, RS = 10 k - 3 dB hfe NFW 4/14 Max. - DocID17734 Rev 2 2N2484HR Electrical characteristics Table 5. Symbol Electrical characteristics (continued) Parameter NFN1 NFN2 Spot noise figure NFN3 Test conditions (1) Min. Typ. Max. Unit VCE = 5 V, IC = 10 A RS = 10 k, f = 100 Hz Power BW = 200 Hz - - 3 VCE = 5 V, IC = 10 A RS = 10 k, f = 1 kHz Power BW = 20 Hz - - 10 VCE = 5 V, IC = 10 A RS = 10 k, f = 10 kHz Power BW = 2 Hz - - 2 Typ. Max. Unit - 10 A dB 1. Measurement performed on a sample basis, LTPD 7 or less. 2. Pulse measurement: Pulse width 300 s, duty cycle 1.0 % Table 6. Symbol Electrical characteristics at high and low temperatures Parameter Test conditions ICBO Collector-base cutoff current VCB = 45 V, Tamb = 150 C hFE2 DC forward current transfer ratio IC = 10 A, VCE = 5 V Tamb = - 55 C DocID17734 Rev 2 Min. 20 - 5/14 Test circuit 2N2484HR 3 Test circuit Figure 2. Circuit for electrical measurements AM07818v1 Table 7. List of components Component Description C1, C2, C5 3.0 - 35 pF C3 (1) 24 pF C4 0.4 - 7.0 pF L1 Straight piece n 16 bare tin wire, 5/8 inch long L2 3 turns n 16 wire, 1/4 inch ID, 5/16 inch long L3 1 turn n 18 wire, 1/4 inch ID, 1/4 inch long L4 Ferrite rf choke, Z = 450 1. For optimum performance, C3 should be mounted as close as possible to the base lead. 6/14 DocID17734 Rev 2 2N2484HR 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 8. LCC-3 mechanical data mm. Dim. Min. Typ. Max. A 1.16 C 0.45 0.50 0.56 D 0.60 0.76 0.91 E 0.91 1.01 1.12 F 1.95 2.03 2.11 G 2.92 3.05 3.17 I 2.41 2.54 2.66 J 0.42 0.57 0.72 K 1.37 1.52 1.67 L 0.40 0.50 0.60 M 2.46 2.54 2.62 N 1.80 1.90 2.00 R 1.42 0.30 DocID17734 Rev 2 7/14 Package mechanical data 2N2484HR Figure 3. LCC-3 drawings 1 2 3 8/14 DocID17734 Rev 2 2N2484HR Package mechanical data Table 9. LCC-3UB mechanical data mm. Dim. Min. Typ. Max. A 1.16 1.42 C 0.46 0.51 0.56 D 0.56 0.76 0.96 E 0.92 1.02 1.12 F 1.95 2.03 2.11 G 2.92 3.05 3.18 I 2.41 2.54 2.67 J 0.42 0.57 0.72 K 1.37 1.52 1.67 L 0.41 0.51 0.61 M 2.46 2.54 2.62 N 1.81 1.91 2.01 r 0.20 r1 0.30 r2 0.56 DocID17734 Rev 2 9/14 Package mechanical data 2N2484HR Figure 4. LCC-3UB drawings 10/14 DocID17734 Rev 2 2N2484HR Package mechanical data Table 10. TO-18 mechanical data mm. Dim. Min. A Typ. Max. 12.7 B 0.49 D 5.3 E 4.9 F 5.8 G 2.54 H 1.2 I 1.16 L 45 Figure 5. TO-18 drawings DocID17734 Rev 2 11/14 Order codes 5 2N2484HR Order codes Table 11. Order codes Order codes ESCC Part number Packages Lead Finish Marking EPPL Packing 2N2484UB1 - LCC-3UB Gold 2N2484UB1 - Waffle pack 2N2484UB06 5201/001/06 LCC-3UB Gold 520100106 - Waffle pack 2N2484UB07 5201/001/07 LCC-3UB Solder Dip 520100107 - Waffle pack SOC2484 - LCC-3 Gold SOC2484HRB 2N2484HR 5201/001/04 or 05 5201/001/01 or 02 LCC-3 TO-18 SOC2484 - Waffle pack (1) 520100104 or 05 - Waffle pack Dip(1) 520100101 or 02 Y Strip pack Gold or Solder Dip Gold or Solder 1. Depending ESCC part number mentioned on the purchase order. Contact ST sales office for information about the specific conditions for: 12/14 - Products in die form - Tape & reel packing DocID17734 Rev 2 2N2484HR 6 Revision history Revision history Table 12. Document revision history Date Revision Changes 09-Jul-2010 1 Initial release. 26-Feb-2013 2 Updated: Table 1: Device summary and Table 11: Order codes. DocID17734 Rev 2 13/14 2N2484HR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER'S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 DocID17734 Rev 2