* VSP-200-12 Single Output with PFC Function Features *Universal AC input / full range *Built-in active PFC function *Short circuit, over load, over voltage, over temperature protected *Built-in cooling fan speed control *Built-in constant current limiting circuit *Low profile: 33mm thickness *Built-in fan speed control *Remote on/off control (Optional) *LED indicator for power on *100% full load burn-in test *Fixed switching frequency at PFC:67KHz PWM:134KHz *3 year warranty DC output voltage Output V. tolerance Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power Efficiency DC voltage adj. Input voltage range AC current Inrush current Leakage current Overload protection Over voltage protection Over temp. protection Remote control (option) Temperature coefficient Set up, rise, hold up time Vibration Power factor Withstand voltage Isolation resistance Working temp., humidity Storage temp., humidity Dimensions Weight Safety standards EMC standards Notes: 12V 2% 16.7A 0-16.7A 100mV 0.5% 0.5% 200.4W 79% +10, -5% 85~264VAC 47~63Hz 120~370VDC 2.8A/115V 1.4A/230V 3.3V: 2A/115V 1.0A/230V cold start 40A/230V <2mA/240VAC 105%~150% type: constant current limiting, auto recovery 105%~135% type: shutdown reset: re-power on 95C5C (TSW1) type: shutdown reset: auto recovery CN1: 3 ~15VDC Power on, <1VDC Power off 0.05% / C (0~50C) 600ms, 60ms, 20ms 10~500Hz, 2G 10min./1cycle (1 hour each axes) PF>0.93/230VAC, PF>0.98/115VAC I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min. -10C~+60% (refer to output derating curve), 20%-90% RH -20C~+85C, 10%~95% RH 7.83x3.90x1.97 inches (199x99x50 mm) 1.76 lbs (0.8 Kg) UL1950, TUV EN60950, S-Mark approved CISPR22 (EN55022) CLASS B, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-3-2,-3 1. All parameters are specified at 230VAC input, rated load, 25C 70% RH ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uF & 47 uF capacitor 4. Line regulation is measured from low line to high line at rated load *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer's applications using V-Infinity products other than repair or replacing (at V-I's option) V-Infinity products not meeting V-I's published specifications. Nothing will be covered outside of standard product warranty. V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258 * VSP-200-12 Single Output with PFC Function Block Diagram Output Derating Static Characteristics Dimensions (mm) V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258