VSP-200-12 - V-Infinity - Datasheet.Directory

Features

·Universal AC input / full range

·Built-in active PFC function

·Short circuit, over load, over voltage, over

temperature protected

·Built-in cooling fan speed control

·Built-in constant current limiting circuit

·Low profile: 33mm thickness

·Built-in fan speed control

·Remote on/off control (Optional)

·LED indicator for power on

·100% full load burn-in test

·Fixed switching frequency at PFC:67KHz

PWM:134KHz

·3 year warranty



•

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

VSP-200-12 Single Output with PFC Function

DC output voltage 12V

Output V. tolerance ±2%

Output rated current 16.7A

Output current range 0-16.7A

Ripple & noise 100mV

Line regulation ±0.5%

Load regulation ±0.5%

DC output power 200.4W

Efficiency 79%

DC voltage adj. +10, -5%

Input voltage range 85~264VAC 47~63Hz 120~370VDC

AC current 2.8A/115V 1.4A/230V 3.3V: 2A/115V 1.0A/230V

Inrush current cold start 40A/230V

Leakage current <2mA/240VAC

Overload protection 105%~150%

type: constant current limiting, auto recovery

Over voltage protection 105%~135% type: shutdown reset: re-power on

Over temp. protection 95ºC±5ºC (TSW1) type: shutdown reset: auto recovery

Remote control (option) CN1: 3 ~15VDC Power on, <1VDC Power off

Temperature coefficient ±0.05% / °C (0~50°C)

Set up, rise, hold up time 600ms, 60ms, 20ms

Vibration 10~500Hz, 2G 10min./1cycle (1 hour each axes)

Power factor PF>0.93/230VAC, PF>0.98/115VAC

Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min.

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20ºC~+85ºC, 10%~95% RH

Dimensions 7.83x3.90x1.97 inches (199x99x50 mm)

Weight 1.76 lbs (0.8 Kg)

Safety standards UL1950, TUV EN60950, S-Mark approved

EMC standards CISPR22 (EN55022) CLASS B, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-3-2,-3

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-

tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-

tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-

lished specifications. Nothing will be covered outside of standard product warranty.