OPA234UA/2K5G4 - Texas Instruments

www.ti.com

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.

Out D

–In D

+In D

V–

+In C

–In C

Out C

Out A

–In A

+In A

V+

+In B

–In B

Out B

OPA4234

SO-14

Low-Power, Precision

SINGLE-SUPPLY OPERATIONAL AMPLIFIERS

FEATURES

● WIDE SUPPLY RANGE:

Single Supply: VS = +2.7V to +36V

Dual Supply: VS = ±1.35V to ±18V

● SPECIFIED PERFORMANCE:

+2.7V, +5V, and ±15V

● LOW QUIESCENT CURRENT: 250µA/amp

● LOW INPUT BIAS CURRENT: 25nA max

● LOW OFFSET VOLTAGE: 100µV max

● HIGH CMRR, PSRR, and AOL

●SINGLE, DUAL, and QUAD VERSIONS

DESCRIPTION

The OPA234 series low-cost op amps are ideal for

single-supply, low-voltage, low-power applications. The

series provides lower quiescent current than older

“1013”-type products and comes in current industry-

standard packages and pinouts. The combination of

low offset voltage, high common-mode rejection, high

power-supply rejection, and a wide supply range pro-

vides excellent accuracy and versatility. Single, dual,

and quad versions have identical specifications for

maximum design flexibility. These general-purpose op

amps are ideal for portable and battery-powered appli-

cations.

The OPA234 series op amps operate from either single

or dual supplies. In single-supply operation, the input

common-mode range extends below ground and the

output can swing to within 50mV of ground. Excellent

phase margin makes the OPA234 series ideal for de-

manding applications, including high load capacitance.

Dual and quad designs feature completely indepen-

dent circuitry for lowest crosstalk and freedom from

interaction.

Single version packages are in an SO-8 surface-mount

and a space-saving MSOP-8 surface-mount. Dual pack-

ages are in an SO-8 surface-mount. Quad packages

are in an SO-14 surface-mount. All are specified for

–40°C to +85°C operation.

V+

Out B

–In B

+In B

Out A

–In A

+In A

V–

OPA2234

SO-8

V+

Output

Offset Trim

–In

+In

V–

OPA234

SO-8, MSOP-8

OPA234

OPA2234

OPA234

OPA4234

OPA234

OPA2234

OPA4234

SBOS055B – MAY 1996 – REVISED APRIL 2008

OPA234, OPA2234, OPA4234

2SBOS055B

www.ti.com

ELECTRICAL CHARACTERISTICS: VS = +5V

At TA = 25°C, VS = +5V, RL = 10kΩ connected to VS/2, and VOUT = VS/2, unless otherwise noted.

OPA234U, E

OPA2234U

OPA234UA, EA

OPA2234UA

OPA4234UA, U

PARAMETER CONDITION MIN TYP MAX MIN TYP MAX UNITS

OFFSET VOLTAGE

Input Offset Voltage VOS VCM = 2.5V ±40 ±100 ✻±250 µV

OPA234E, EA ±100 ±150 ✻±350 µV

vs Temperature(1) dVOS/dT Operating Temperature Range ±0.5 ±3✻✻µV/°C

vs Power Supply PSRR VS = +2.7V to +30V, VCM = 1.7V 3 10 ✻20 µV/V

vs Time 0.2 ✻µV/mo

Channel Separation (Dual, Quad) 0.3 ✻µV/V

INPUT BIAS CURRENT

Input Bias Current(2) IBVCM = 2.5V –15 –30 ✻–50 nA

Input Offset Current IOS VCM = 2.5V ±1±5✻✻nA

NOISE f = 1kHz

Input Voltage Noise Density vn25 ✻nV/√Hz

Current Noise Density in80 ✻fA/√Hz

INPUT VOLTAGE RANGE

Common-Mode Voltage Range –0.1 (V+) –1✻✻V

Common-Mode Rejection CMRR VCM = –0.1V to 4V 91 106 86 ✻dB

INPUT IMPEDANCE

Differential 107 || 5 ✻Ω || pF

Common-Mode VCM = 2.5V 1010 || 6 ✻Ω || pF

OPEN-LOOP GAIN VO = 0.25V to 4V

Open-Loop Voltage Gain AOL RL = 10kΩ108 120 100 ✻dB

RL = 2kΩ86 96 ✻✻ dB

FREQUENCY RESPONSE

Gain-Bandwidth Product GBW CL = 100pF 0.35 ✻MHz

Slew Rate SR 0.2 ✻V/µs

Settling Time: 0.1% G = 1, 3V Step, CL = 100pF 15 ✻µs

0.01% G = 1, 3V Step, CL = 100pF 25 ✻µs

Overload Recovery Time (VIN) (Gain) = VS16 ✻µs

OUTPUT

Voltage Output: Positive RL = 10kΩ to VS/2 (V+) –1

(V+) –0.65

✻✻ V

Negative RL = 10kΩ to VS/2 0.25 0.05 ✻✻ V

Positive RL = 10kΩ to Ground (V+) –1

(V+) –0.65

✻✻ V

Negative RL = 10kΩ to Ground 0.1 0.05 ✻✻ V

Short-Circuit Current ISC ±11 ✻mA

Capacitive Load Drive (Stable Operation)(3) G = +1 1000 ✻pF

POWER SUPPLY

Specified Operating Voltage +5 ✻V

Operating Voltage Range +2.7 +36 ✻✻V

Quiescent Current (per amplifier) IQIO = 0 250 300 ✻✻µA

TEMPERATURE RANGE

Specified Range –40 +85 ✻✻°C

Operating Range –40 +125 ✻✻°C

Storage –55 +125 ✻✻°C

Thermal Resistance

8-Pin DIP 100 ✻°C/W

SO-8 Surface-Mount 150 ✻°C/W

MSOP-8 Surface-Mount 220 ✻°C/W

14-Pin DIP 80 ✻°C/W

SO-14 Surface-Mount 110 ✻°C/W

✻ Specifications same as OPA234U, E.

NOTES: (1) Wafer-level tested to 95% confidence level. (2) Positive conventional current flows into the input terminals. (3) See

Small-Signal Overshoot vs Load

Capacitance

typical curve.

OPA234, OPA2234, OPA4234 3

SBOS055B www.ti.com

ELECTRICAL CHARACTERISTICS: VS = +2.7V

At TA = 25 °C, VS = +2.7V, RL = 10kΩ connected to VS/2, and VOUT = VS/2, unless otherwise noted.

OPA234U, E

OPA2234U

OPA234UA, EA

OPA2234UA

OPA4234UA, U

PARAMETER CONDITION MIN TYP MAX MIN TYP MAX UNITS

OFFSET VOLTAGE

Input Offset Voltage VOS VCM = 1.35V ±40 ±100 ✻±250 µV

OPA234E, EA ±100 ±150 ✻±350 µV

vs Temperature(1) dVOS/dT Operating Temperature Range ±0.5 ±3✻✻µV/°C

vs Power Supply PSRR VS = +2.7V to +30V, VCM = 1.7V 3 10 ✻20 µV/V

vs Time 0.2 ✻µV/mo

Channel Separation (Dual, Quad) 0.3 ✻µV/V

INPUT BIAS CURRENT

Input Bias Current(2) IBVCM = 1.35V –15 –30 ✻–50 nA

Input Offset Current IOS VCM = 1.35V ±1±5✻✻ n

NOISE f = 1kHz

Input Voltage Noise Density vn25 ✻nV/√Hz

Current Noise Density in80 ✻fA/√Hz

INPUT VOLTAGE RANGE

Common-Mode Voltage Range –0.1 (V+) –1✻✻V

Common-Mode Rejection CMRR VCM = –0.1V to 1.7V 91 106 86 ✻dB

INPUT IMPEDANCE

Differential 107 || 5 ✻Ω || pF

Common-Mode VCM = 1.35V 1010 || 6 ✻Ω || pF

OPEN-LOOP GAIN VO = 0.25V to 1.7V

Open-Loop Voltage Gain AOL RL = 10kΩ108 125 100 ✻dB

RL = 2kΩ86 96 86 ✻dB

FREQUENCY RESPONSE

Gain-Bandwidth Product GBW CL = 100pF 0.35 ✻MHz

Slew Rate SR 0.2 ✻V/µs

Settling Time: 0.1% G = 1, 1V Step, CL = 100pF 6 ✻µs

0.01% G = 1, 1V Step, CL = 100pF 16 ✻µs

Overload Recovery Time (VIN) (Gain) = VS8✻µs

OUTPUT

Voltage Output: Positive RL = 10kΩ to VS/2 (V+) –1 (V+) –0.6 ✻✻ V

Negative RL = 10kΩ to VS/2 0.25 0.05 ✻✻ V

Positive RL = 10kΩ to Ground (V+) –1

(V+) –0.65

✻✻ V

Negative RL = 10kΩ to Ground 0.1 0.05 ✻✻ V

Short-Circuit Current ISC ±8✻mA

Capacitive Load Drive (Stable Operation)(3) G = +1 1000 ✻pF

POWER SUPPLY

Specified Operating Voltage +2.7 ✻V

Operating Voltage Range +2.7 +36 ✻✻V

Quiescent Current (per amplifier) IQIO = 0 250 300 ✻✻µA

TEMPERATURE RANGE

Specified Range –40 +85 ✻✻°C

Operating Range –40 +125 ✻✻°C

Storage –55 +125 ✻✻°C

Thermal Resistance

8-Pin DIP 100 ✻°C/W

SO-8 Surface-Mount 150 ✻°C/W

MSOP-8 Surface-Mount 220 ✻°C/W

14-Pin DIP 80 ✻°C/W

SO-14 Surface-Mount 110 ✻°C/W

✻ Specifications same as OPA234U, E.

NOTES: (1) Wafer-level tested to 95% confidence level. (2) Positive conventional current flows into the input terminals. (3) See

Small-Signal Overshoot vs Load

Capacitance

typical curve.

OPA234, OPA2234, OPA4234

4SBOS055B

www.ti.com

PARAMETER CONDITION MIN TYP MAX MIN TYP MAX UNITS

OFFSET VOLTAGE

Input Offset Voltage VOS VCM = 0V ±70 ±250 ✻±500 µV

OPA4234U Model ±70 ±250 µV

vs Temperature(1) dVOS/dT Operating Temperature Range ±0.5 ±5✻✻µV/°C

vs Power Supply PSRR VS = ±1.35V to ±18V, VCM = 0V 3 10 ✻20 µV/V

vs Time 0.2 ✻µV/mo

Channel Separation (Dual, Quad) 0.3 ✻µV/V

INPUT BIAS CURRENT

Input Bias Current(2) IBVCM = 0V –12 –25 ✻–50 nA

Input Offset Current IOS VCM = 0V ±1±5✻✻nA

NOISE f = 1kHz

Input Voltage Noise Density vn25 ✻nV/√Hz

Current Noise Density in80 ✻fA/√Hz

INPUT VOLTAGE RANGE

Common-Mode Voltage Range (V–) (V+) –1✻✻V

Common-Mode Rejection CMRR VCM = –15V to 14V 91 106 86 ✻dB

INPUT IMPEDANCE

Differential 107 || 5 ✻Ω || pF

Common-Mode VCM = 0V 1010 || 6 ✻Ω || pF

OPEN-LOOP GAIN

Open-Loop Voltage Gain AOL VO = –14.5V to 14V 110 120 100 ✻dB

FREQUENCY RESPONSE

Gain-Bandwidth Product GBW CL = 100pF 0.35 ✻MHz

Slew Rate SR 0.2 ✻V/µs

Settling Time: 0.1% G = 1, 10V Step, CL = 100pF 41 ✻µs

0.01% G = 1, 10V Step, CL = 100pF 47 ✻µs

Overload Recovery Time (VIN) (Gain) = VS22 ✻µs

OUTPUT

Voltage Output: Positive (V+) –1 (V+) –0.7 ✻✻ V

Negative (V–) +0.5

(V–) +0.15

✻✻ V

Short-Circuit Current ISC ±22 ✻mA

Capacitive Load Drive (Stable Operation)(3) G = +1 1000 ✻pF

POWER SUPPLY

Specified Operating Voltage ±15 ✻V

Operating Voltage Range ±1.35 ±18 ✻✻V

Quiescent Current (per amplifier) IQIO = 0 ±275 ±350 ✻✻µA

TEMPERATURE RANGE

Specified Range –40 +85 ✻✻°C

Operating Range –40 +125 ✻✻°C

Storage –55 +125 ✻✻°C

Thermal Resistance

8-Pin DIP 100 ✻°C/W

SO-8 Surface-Mount 150 ✻°C/W

MSOP-8 Surface-Mount 220 ✻°C/W

14-Pin DIP 80 ✻°C/W

SO-14 Surface-Mount 110 ✻°C/W

✻ Specifications same as OPA234U, E.

NOTES: (1) Wafer-level tested to 95% confidence level. (2) Positive conventional current flows into the input terminals. (3) See

Small-Signal Overshoot vs Load

Capacitance

typical curve.

ELECTRICAL CHARACTERISTICS: VS = ±15V

At TA = 25°C, VS = ±15V, and RL = 10kΩ connected to ground, unless otherwise noted.

OPA234U, E

OPA2234U

OPA234UA, EA

OPA2234UA

OPA4234UA, U

OPA234, OPA2234, OPA4234 5

SBOS055B www.ti.com

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas

Instruments recommends that all integrated circuits be handled

with appropriate precautions. Failure to observe proper han-

dling and installation procedures can cause damage.

ESD damage can range from subtle performance degrada-

tion to complete device failure. Precision integrated circuits

may be more susceptible to damage because very small

parametric changes could cause the device not to meet its

published specifications.

ABSOLUTE MAXIMUM RATINGS

Supply Voltage, V+ to V–.................................................................... 36V

Input Voltage .....................................................(V–) –0.7V to (V+) +0.7V

Output Short-Circuit(1) .............................................................. Continuous

Operating Temperature ..................................................–40°C to +125°C

Storage Temperature .....................................................–55°C to +125°C

Junction Temperature...................................................................... 150°C

Lead Temperature (soldering, 10s)................................................. 300°C

NOTE: (1) Short-circuit to ground, one amplifier per package.

PACKAGE

PRODUCT PACKAGE MARKING

Single

OPA234EA MSOP-8 Surface-Mount A34

OPA234E ""

OPA234UA SO-8 Surface-Mount OPA234UA

OPA234U "OPA234U

Dual

OPA2234UA SO-8 Surface-Mount OPA2234UA

OPA2234U "OPA2234U

Quad

OPA4234UA SO-8 Surface-Mount OPA4234UA

OPA4234U "OPA4234U

NOTE: (1) For the most current package and ordering information, see the

Package Option Addendum located at the end of this data sheet.

PACKAGE INFORMATION

OPA234, OPA2234, OPA4234

6SBOS055B

www.ti.com

INPUT NOISE AND CURRENT NOISE

SPECTRAL DENSITY vs FREQUENCY

100

Voltage Noise (nV/√Hz)

Current Noise (fA/√Hz)

Frequency (Hz)

10 100 1k 10k 100k

Current Noise

Voltage Noise

TYPICAL CHARACTERISTIC CUR VES

At TA = +25°C and RL = 10kΩ, unless otherwise noted.

INPUT BIAS CURRENT

vs INPUT COMMON-MODE VOLTAGE

Common-Mode Voltage (V)

Input Bias Current (nA)

–17

–16

–15

–14

–13

–12

–11

–10–15 –10 –50 51015

VS = +5V

VS = +2.7V

VS = ±15V

INPUT BIAS AND INPUT OFFSET CURRENT

vs TEMPERATURE

Ambient Temperature (°C)

Input Bias, Input Offset Current (nA)

–20

–15

–10

–5

+5–75 –50 –25 0 25 50 75 100 125

= +2.7V, +5V

= ±15V I

OPEN-LOOP GAIN/PHASE vs FREQUENCY

0.1

140

120

100

–20

–30

–60

–90

–120

–150

–180

Voltage Gain (dB)

Phase (°)

Frequency (Hz)

1 10 100 1k 10k 100k 1M

CL = 100pF

VO = 0.25V

VS = +5V

±15V

VO = VS

VS = +2.7V

CMR

+PSR

POWER-SUPPLY AND COMMON-MODE REJECTION

vs FREQUENCY

Frequency (Hz)

PSR, CMR (dB)

120

110

100

010 100 1k 10k 100k 1M

–PSR

= +2.7V, +5V

or ±15V

= +2.7V or +5V

= ±15V

CHANNEL SEPARATION vs FREQUENCY

Frequency (Hz)

Channel Separation (dB)

160

140

120

100

80 10 100 1k 10k 100k

Dual and quad devices.

G = 1, all channels.

Quad measured channel

A to D or B to C—other

combinations yield improved

rejection.

= 10kΩ

OPA234, OPA2234, OPA4234 7

SBOS055B www.ti.com

TYPICAL CHARACTERISTIC CURVES (Cont.)

At TA = +25°C and RL = 10kΩ, unless otherwise noted.

OFFSET VOLTAGE

PRODUCTION DISTRIBUTION

Percent of Amplifiers (%)

Offset Voltage (µV)

125

100

150

175

0.3% 0.1%

200

175

150

125

100

= +2.7V, +5V

Typical production

distribution of packaged

units. Single, dual, and

quad units included.

0.1%

OFFSET VOLTAGE

PRODUCTION DISTRIBUTION

Percent of Amplifiers (%)

Offset Voltage (µV)

100

200

300

400

500

–500

–400

–300

–200

–100

= ±15V

Typical production

distribution of packaged

units. Single, dual,

and quad units included.

0.2%

0.3%

0.7%

0.1% 0.5%

OFFSET VOLTAGE DRIFT

PRODUCTION DISTRIBUTION

Percent of Amplifiers (%)

Offset Voltage Drift (µV/°C)

3.5

4.5

0.5

1.5

2.5

0.1% 0.1%

0.2%

0.5%

0.3%

VS = +5V Typical production

distribution of packaged

units. Single, dual,

and quad units included.

OFFSET VOLTAGE DRIFT

PRODUCTION DISTRIBUTION

Percent of Amplifiers (%)

Offset Voltage Drift (µV/°C)

0.5

1.5

3.5

2.5

4.5

5.5

6.5

7.5

= ±15V Typical production

distribution of packaged

units. Single, dual,

and quad units included.

0.1% 0.1%0.1%

0.1%

0.2%

0.4% 0.3%

OFFSET VOLTAGE DRIFT

PRODUCTION DISTRIBUTION

Percent of Amplifiers (%)

Offset Voltage Drift (µV/°C)

3.5

4.5

0.5

1.5

2.5

0.1% 0.1%0.2% 0.1%

0.3%

VS = +2.7V Typical production

distribution of packaged

units. Single, dual,

and quad units included.

, CMR, AND PSR vs TEMPERATURE

Ambient Temperature (°C)

, CMR, PSR (dB)

140

130

120

110

100

60–75 –50 –25 0 25 50 75 100 125

CMR

PSR

= (V–) –0.02V to (V+) –1V

= +2.7V

= +5V

= ±15V

OPA234, OPA2234, OPA4234

8SBOS055B

www.ti.com

TYPICAL CHARACTERISTIC CURVES (Cont.)

At TA = +25°C and RL = 10kΩ, unless otherwise noted.

LARGE-SIGNAL STEP RESPONSE

G = 1, C

= 100pF, V

= +5V

1V/div

10µs/div

SMALL-SIGNAL STEP RESPONSE

G = 1, C

= 10,000pF, V

= +5V

20mV/div

20µs/div

OUTPUT VOLTAGE SWING vs OUTPUT CURRENT

V+

(V+) –0.5

(V+) –1.0

(V+) –1.5

(V+) –2.0

(V+) –2.5

(V+) –3.0

(V–) +3.0

(V–) +2.5

(V–) +2.0

(V–) +1.5

(V–) +1.0

(V–) +0.5

V–0±5±10

125°C

85°C

25°C

±15

Output Current (mA)

Output Voltage Swing (V)

–55°C

–40°C

25°C

85°C

125°C

–40°C

High output current may

not be available at low

supply voltages due to

output swing limitations.

SMALL-SIGNAL OVERSHOOT

vs LOAD CAPACITANCE

10pF 100pF 1nF 10nF 100nF

Load Capacitance

Overshoot (%)

G = –1,

G = +2

G = +1,

= +2.7, +5V

G = +1,

= ±15V G = ±10

G = –2

= 100mVp-p

SMALL-SIGNAL STEP RESPONSE

G = 1, C

= 100pF, V

= +5V

2µs/div

20mV/div

SETTLING TIME vs CLOSED-LOOP GAIN

Gain (V/V)

Settling Time (µs)

1000

100

1±1±10 ±100

VS = ±15V,

10V Step

VS = +2.7V,

1V Step

CL = 100pF

0.1%

0.01%

VS = +5V,

3V Step

OPA234, OPA2234, OPA4234 9

SBOS055B www.ti.com

QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT

vs TEMPERATURE

Temperature (°C)

Quiescent Current (µA)

525

450

375

300

225

150

Short-Circuit Current (mA)

–75 –50 –25 0 25 50 75 100 125

±I

= +2.7V

= +5V

= +2.7V or +5V

= ±15V

APPLICATIONS INFORMATION

The OPA234 series op amps are unity-gain stable and

suitable for a wide range of general-purpose applications.

Power-supply pins should be bypassed with 10nF ceramic

capacitors.

OPERATING VOLTAGE

The OPA234 series op amps operate from single (+2.7V to

+36V) or dual (±1.35V to ±18V) supplies with excellent

performance. Specifications are production tested with +2.7V,

+5V, and ±15V supplies. Most behavior remains unchanged

throughout the full operating voltage range. Parameters

which vary significantly with operating voltage are shown in

the Typical Characterisitc curves.

OFFSET VOLTAGE TRIM

Offset voltage of the OPA234 series amplifiers is laser

trimmed and usually requires no user adjustment. The

OPA234 (single op amp version) provides offset voltage

trim connections on pins 1 and 5. Offset voltage can be

adjusted by connecting a potentiometer, as shown in Fig-

ure 1. This adjustment should be used only to null the offset

of the op amp, not to adjust system offset or offset pro-

duced by the signal source. Nulling offset could degrade

the offset drift behavior of the op amp. While it is not

possible to predict the exact change in drift, the effect is

usually small.

FIGURE 1. OPA234 Offset Voltage Trim Circuit.

V+

V–

100kΩ

OPA234 single op amp only.

Use offset adjust pins only to null

offset voltage of op amp—see text.

Trim Range: ±4mV typ

(V–) = 0V for single supply operation.

OPA234 6

10nF

TYPICAL CHARACTERISTIC CURVES (Cont.)

At TA = +25°C and RL = 10kΩ, unless otherwise noted.

MAXIMUM OUTPUT VOLTAGE

vs FREQUENCY

100k

Frequency (Hz)

1k 10k

Output Voltage (Vp-p)

= ±2.7V

= +5V

Maximum output voltage

without slew-rate induced

distortion.

= ±15V

PACKAGE OPTION ADDENDUM

www.ti.com 16-Aug-2012

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

OPA2234P OBSOLETE PDIP P 8 TBD Call TI Call TI

OPA2234PA OBSOLETE PDIP P 8 TBD Call TI Call TI

OPA2234U ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234U-2/2K5 OBSOLETE SOIC D 8 TBD Call TI Call TI

OPA2234U/2K5 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234U/2K5E4 PREVIEW SOIC D 8 TBD Call TI Call TI

OPA2234U/2K5G4 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234UA ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234UA/2K5 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234UA/2K5E4 PREVIEW SOIC D 8 TBD Call TI Call TI

OPA2234UA/2K5G4 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234UAE4 PREVIEW SOIC D 8 TBD Call TI Call TI

OPA2234UAG4 ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA2234UE4 PREVIEW SOIC D 8 TBD Call TI Call TI

OPA2234UG4 ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234E/250 ACTIVE VSSOP DGK 8 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234E/250G4 ACTIVE VSSOP DGK 8 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234E/2K5 ACTIVE VSSOP DGK 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234E/2K5E4 PREVIEW VSSOP DGK 8 TBD Call TI Call TI

OPA234E/2K5G4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

PACKAGE OPTION ADDENDUM

www.ti.com 16-Aug-2012

Addendum-Page 2

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

OPA234EA/250 ACTIVE VSSOP DGK 8 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234EA/250G4 ACTIVE VSSOP DGK 8 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234EA/2K5 ACTIVE VSSOP DGK 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234EA/2K5G4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234P OBSOLETE PDIP P 8 TBD Call TI Call TI

OPA234PA OBSOLETE PDIP P 8 TBD Call TI Call TI

OPA234U ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234U/2K5 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234U/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234UA ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234UA/2K5 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234UA/2K5E4 PREVIEW SOIC D 8 TBD Call TI Call TI

OPA234UA/2K5G4 ACTIVE SOIC D 8 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA234UAE4 PREVIEW SOIC D 8 TBD Call TI Call TI

OPA234UAG4 OBSOLETE SOIC D 8 TBD Call TI Call TI

OPA234UG4 ACTIVE SOIC D 8 75 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234PA OBSOLETE PDIP N 14 TBD Call TI Call TI

OPA4234U ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234U/2K5 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234U/2K5E4 PREVIEW SOIC D 14 TBD Call TI Call TI

OPA4234U/2K5G4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

PACKAGE OPTION ADDENDUM

www.ti.com 16-Aug-2012

Addendum-Page 3

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

OPA4234UA ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234UA/2K5 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234UA/2K5E4 PREVIEW SOIC D 14 TBD Call TI Call TI

OPA4234UA/2K5G4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234UAE4 PREVIEW SOIC D 14 TBD Call TI Call TI

OPA4234UAG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

OPA4234UE4 PREVIEW SOIC D 14 TBD Call TI Call TI

OPA4234UG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-3-260C-168 HR

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

PACKAGE OPTION ADDENDUM

www.ti.com 16-Aug-2012

Addendum-Page 4

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF OPA2234 :

•Military: OPA2234M

NOTE: Qualified Version Definitions:

•Military - QML certified for Military and Defense Applications

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

OPA2234U/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

OPA2234UA/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

OPA234E/250 VSSOP DGK 8 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

OPA234E/2K5 VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

OPA234EA/250 VSSOP DGK 8 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

OPA234EA/2K5 VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

OPA234U/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

OPA234UA/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

OPA4234U/2K5 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

OPA4234UA/2K5 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

PACKAGE MATERIALS INFORMATION

www.ti.com 16-Aug-2012

Pack Materials-Page 1

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

OPA2234U/2K5 SOIC D 8 2500 367.0 367.0 35.0

OPA2234UA/2K5 SOIC D 8 2500 367.0 367.0 35.0

OPA234E/250 VSSOP DGK 8 250 210.0 185.0 35.0

OPA234E/2K5 VSSOP DGK 8 2500 367.0 367.0 35.0

OPA234EA/250 VSSOP DGK 8 250 210.0 185.0 35.0

OPA234EA/2K5 VSSOP DGK 8 2500 367.0 367.0 35.0

OPA234U/2K5 SOIC D 8 2500 367.0 367.0 35.0

OPA234UA/2K5 SOIC D 8 2500 367.0 367.0 35.0

OPA4234U/2K5 SOIC D 14 2500 367.0 367.0 38.0

OPA4234UA/2K5 SOIC D 14 2500 367.0 367.0 38.0

PACKAGE MATERIALS INFORMATION

www.ti.com 16-Aug-2012

Pack Materials-Page 2

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which

have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such

components to meet such requirements.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com

Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265