Ceramic Disc Capacitors NCD Series Class I TEMPERATURE COMPENSATING AND TEMPERATURE STABLE TYPES (CLASS I) FEATURES * PROVIDES AN ACCURATE, PREDICTABLE LINEAR CAPACITANCE ..CHANGE WITH VARIATIONS IN OPERATING TEMPERATURE RoHS * NPO TYPES PROVIDE DRIFT FREE PERFORMANCE Compliant includes all homogeneous materials * TIGHT TOLERANCES AVAILABLE * AVAILABLE WITH FORMED LEADS AND ON TAPE *See Part Number System for Details SPECIFICATIONS Temperature Characteristics Operating Temperature Range Capacitance Range Standard Tolerance Capacitance Change Over Temperature Range NPO N750 SL N1500 0.5 ~ 1000pF 22 ~ 2200pF -5% ~ +9% -10% ~ +20% -30C ~ +85C 0.5 ~ 22pF 22 ~ 470pF 5% (J) 1% -5% ~ +7.5% 1000 (C>30pF) 400+20C (<30pF) Minimum 10,000 Megohms N750120ppm N330500ppm 50Vdc ~ 1KVdc Q Factor (Min. 1MHz) Insulation Resistance Temperature Coefficient Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Cap. Change Load Life Test @ 85C Q Factor (min.) 1,000 Hours I.R. (min.) Test Conditions 060ppm 500 (C>30pF) 200+10C (<30pF) N1500250ppm 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum 3% 15% 30% 50% Shall Confom To Initial Measurements Above 10,000 Megohms <1,000pF; 1MHz, 1.2Vrms Max., >1,000pF; 1KHz, 1.2Vrms Max. NCD 100 J 500 NPO J .100LS TR F RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Optional Lead Space (LS) and/or Lead Length (LL) in inches Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) Temperature Coefficient Working Voltage DC C +10 D A-NPO B-N-750 C-N-1500 D-SL B +5 A O -10 PERCENT CHANGE FROM 25OC -5 A B D C TEMPERATURE -55 -35 -15 +5 +25 +45 +65 +85 Tolerance Code C = 0.25pF K = 10% D = 0.5pF M = 20% J = 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. "R" indicates decimal for under 10pfd. Series (R) 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Ceramic Disc Capacitors Body Diameter 5 ~ 11 Standard Bulk 6.35 0.8 >12 6.35 0.8 NCD Series Class I Low Voltage Standard Lead Spacing (mm) - S Standard Optional Bulk Optional T&R T&R mm (inches) mm (inches) 5.0 0.8 5.0 0.8 (0.200LS) 2.5 0.8 (0.100LS) 7.5 0.8 (0.295LS) 7.5 0.8 (0.295LS) 5.0 0.8 10.0 0.8 (0.395LS) 10.0 0.8 (0.395LS) 100Vdc & Below 500Vdc & Up 2 max. 3 max. 23 min. 23 min. LEAD DIAMETER 0.6MM IS STANDARD BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV S S K Style J Style D Style E Style 5 max. 5 max. 1.5+0.2 1.5+0.2 5 max. 23 min. 23 min. 1.5+0.2 S S S 4.7 + 1 5 max. 1.5+0.2 4.7 + 1 S (BULK ONLY) (BULK AND TAPED STYLES) STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE NPO Cap. (pF) 0.5 ~ 15 18 20 22 27 33 39 47 56 68 75 82 100 120 150 180 220 270 330 470 560 680 750 820 1000 50 100 6 6 6 6 - 500 1K 6 6 6 6 - 6 - 50 100 6 6 6 6 6 6 7 7 7 7 8 8 9 9 10 12 14 16 - N750 SL Working Voltage (Vdc) 50 500 1K 500 100 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 6 6 6 7 6 6 7 8 6 6 7 8 6 6 7 9 6 6 7 9 6 6 7 9 6 6 8 10 6 6 8 10 6 6 9 12 6 7 9 14 6 7 10 16 7 8 12 16 8 9 14 18 8 10 16 20 9 12 10 12 10 14 12 16 12 16 14 16 N1500 1K 6 6 6 6 6 6 6 6 6 6 7 7 7 7 8 8 9 10 12 14 14 16 16 16 18 50 100 6 6 6 6 6 6 6 6 6 6 6 6 6 7 8 8 9 10 10 12 12 14 500 1K 6 6 6 6 6 6 6 6 6 7 7 8 8 9 9 10 12 14 14 16 16 16 6 6 6 6 6 6 6 7 7 7 7 8 8 9 10 12 14 14 16 16 16 18 NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES (R) 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Ceramic Disc Capacitors Taping Specifications DIMENSIONS (mm) Straight Leads <12mm diameter (a slight lead flare may be present) Straight Leads >12 ~ 23mm diameter (a slight lead flare may be present) P P2 P P2 D D P1 h H1 S H L P1 H1 S H L W W d P0 D P1 P P2 D S H1 P1 H H0 L D Crimped Leads >12 ~ 23mm diameter Inward (J) & Outward (K) are available Crimped Leads <12mm diameter Inward (J) & Outward (K) are available P2 d P0 P D S H1 H H0 L W W d P0 Symbol D max. d D P < 12 0.6 >12 ~ 23 0.6 or 0.8* 25.4 +0.06 -0.05 1.0 Value < 12 Tolerance >12 ~ 23 P0 12.7 12.7 d P0 P1 5.1 3.85 3.18 t P2 S 6.35 2.5 5.0 6.35 8.95 7.5 H Applies to Parts with 20.0 Crimped Leads 12.7 7.7 H0 0.7 1.0 1.5 1.3 +0.8 -0.2 +1.5 -1.0 H1 D W L t h 4.0 18.0 11.0 max. 0.6 0.0 0.2 0.5 --- 0.3 2.0 32.25 max. 16.0 H max. + D max. 0.5 --- 9.5 0.2 D *Lead diameter dependent on capacitor diameter. Contact NIC for details (R) 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Ceramic Disc Capacitors Taping Specifications AMMO PACK REEL H H 372 (14.64") L 377 (14.84") W 55 (2.16") B W L W D Acceptable to standard radial type cartridge. D< = 354 (13.93") > B = 21 (.83") but < 30 (1.18") = W< = 55 (2.16") Acceptable to standard radial type cartridge with a few extra accessories. PART NUMBER SUFFIX FOR OPTIONAL TAPE & REEL OR TAPE & BOX PACKAGING Tape & Reel Straight Lead Options TRF = Tape & Reel with 5mm lead-space TR.100LSF = Tape & Reel with 2.0mm lead-space TR.250LSF = Tape & Reel with 6.35mm lead-space TR.300LSF = Tape & Reel with 7.5mm lead-space TR.375LSF = Tape & Reel with 9.5mm lead-space Tape & Reel Crimped Lead Options (J = Inward Crimp, K = Outward Crimp) JTRF or KTRF = Tape & Reel with 5mm lead-space JTR.250LSF or KTR.250LSF = Tape & Reel with 6.35mm lead-space JTR.300LSF or KTR.300LSF = Tape & Reel with 7.5mm lead-space JTR.375LSF or KTR.375LSF = Tape & Reel with 9.5mm lead-space Tape & Box Straight Lead Options TBF = Tape & Reel with 5mm lead-space TB.100LSF = Tape & Reel with 2.0mm lead-space TB.250LSF = Tape & Reel with 6.35mm lead-space TB.300LSF = Tape & Reel with 7.5mm lead-space TB.375LSF = Tape & Reel with 9.5mm lead-space Tape & Box Crimped Lead Options (J = Inward Crimp, K = Outward Crimp) JTBF or KTBF = Tape & Reel with 5mm lead-space JTB.250LSF or KTBR.250LSF = Tape & Reel with 6.35mm lead-space JTB.300LSF or KTB.300LSF = Tape & Reel with 7.5mm lead-space JTB.375LSF or KTB.375LSF = Tape & Reel with 9.5mm lead-space Notes: 1. The above lead-space options may not be available in all part diameters. Contact NIC for details. 2. Inward "J style" and outward "K style" may not be available in all part diameters and voltages. Contact NIC for details. (R) 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com