https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug, nominal current: 8 A, rated voltage (III/2): 160 V, number of positions: 4 with 8 contacts, pitch: 3.5 mm, connection method: spring-cage connection, color: green, contact surface: tin The figure shows a 10-pos. version with 20 contacts Your advantages Time saving push-in connection, tools not required Defined contact force ensures that contact remains stable over the long term Intuitive use through colour coded actuation lever Optimized for tight installation situations: operation and conductor connection from one direction Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356594271 Weight per Piece (excluding packing) 4.400 g Custom tariff number 85366990 Country of origin Germany Technical data Item properties Brief article description PCB connector Plug-in system MINI COMBICON - DFMC 1,5 Type of contact Female connector 01/03/2021Page1/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Technical data Item properties Range of articles DFMC 1,5/..-ST Pitch 3.5 mm Number of positions 4 Locking without Number of levels 2 Number of connections 8 Number of potentials 8 Electrical parameters Nominal current 8A Nom. voltage 160 V Rated voltage (III/3) 160 V Rated voltage (III/2) 160 V Rated voltage (II/2) 320 V Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Connection capacity Connection method Push-in spring connection pluggable Yes Conductor cross section solid 0.2 mm ... 1.5 mm Conductor cross section flexible 0.2 mm ... 1.5 mm Conductor cross section AWG / kcmil 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm ... 1.5 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 0.14 mm ... 0.75 mm Stripping length 10 mm Specifications for ferrules Recommended crimping pliers 1212034 CRIMPFOX 6 Ferrules without insulating collar, according to DIN462281 Cross section:0.25 mm; Length: 7 mm Cross section:0.34 mm; Length: 7 mm Cross section:0.5 mm; Length: 8 mm ... 10 mm Cross section:0.75 mm; Length: 8 mm ... 10 mm Cross section:1 mm; Length: 8 mm ... 10 mm Cross section:1.5 mm; Length: 10 mm Recommended crimping pliers 1212034 CRIMPFOX 6 Ferrules with insulating collar, according to DIN462284 Cross section:0.14 mm; Length: 8 mm Cross section:0.25 mm; Length: 8 mm ... 10 mm 01/03/2021Page2/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Technical data Specifications for ferrules Cross section:0.34 mm; Length: 8 mm ... 10 mm Cross section:0.5 mm; Length: 8 mm ... 10 mm Cross section:0.75 mm; Length: 10 mm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (4 - 8 m Sn) Metal surface contact area (top layer) Tin (4 - 8 m Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN60695-2-12 850 Glow wire ignition temperature GWIT according to EN60695-2-13 775 Temperature for the ball pressure test according to EN60695-10-2 125 C Material data - actuating element Color of the actuating lever orange (2003) Insulating material PBT CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 23.35 mm Width [ w ] 14.8 mm Height [ h ] 13.25 mm Pitch 3.5 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. 01/03/2021Page3/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Technical data Ambient conditions Ambient temperature (storage/transport) -40 C ... 70 C Ambient temperature (assembly) -5 C ... 100 C Ambient temperature (operation) -40 C ... 100 C (dependent on the derating curve) Termination and connection method Conductor connection test The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force. Test result Test passed Test - repeated connection and release IEC 60999-1:1999-11 Test passed Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Conductor cross section / conductor type / tensile force 0.2 mm / solid / > 10 N 0.2 mm / flexible / > 10 N 1.5 mm / solid / > 40 N 1.5 mm / flexible / > 40 N Mechanical tests according to standard Test specification IEC 61984 Visual inspection IEC 60512-1-1:2002-02 Dimension check IEC 60512-1-2:2002-02 Resistance of inscriptions IEC 60068-2-70:1995-12 Insertion and withdrawal force IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 3N Withdraw strength per pos. approx. 2N Polarization and coding IEC 60512-13-5:2006-02 Contact holder in insert IEC 60512-15-1:2008-05 Test force per pos. 30 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 1.5 mm Minimum clearance - inhomogeneous field (III/2) 1.5 mm Minimum clearance - inhomogeneous field (II/2) 1.5 mm Minimum creepage distance value (III/3) 2 mm 01/03/2021Page4/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Technical data Air clearances and creepage distances Minimum creepage distance value (III/2) 0.8 mm Minimum creepage distance value (II/2) 1.6 mm Electrical tests - Function Specification IEC 60999-1:1999-11 Temperature cycles Specification IEC 60999-1:1999-11 Current carrying capacity / derating curves Caption Type: DFMC 1,5/...-ST-3,5 with DMC 1,5/...-G1-3,5 P20 THR Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 3N Withdraw strength per pos. approx. 2N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 2 m Insertion/withdrawal cycles 25 Contact resistance R2 2.3 m Impulse withstand voltage at sea level 2.95 kV Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 20 Upper limiting temperature requirements <100 C Test passed Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 C/2 h Thermal stress 100 C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 C/1 cycle Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV 3 3 Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger 01/03/2021Page5/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Technical data Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 16 14 12 10 8 6 4 2 0 Dimensional drawing 23,35 = 2-pos. = 5-pos. = 20-pos. 0 10 20 30 a+4,3 13,25 Current strength [A] Diagram 40 50 60 70 80 2,15 16,3 90 100 110 3,5 a Ambient temperature [C] Typ: DFMC 1,5/..-ST-3,5 with DMCV 1,5/..-G1-3,5 P20 THR Diagram Current strength [A] Schematic diagram 16 14 12 10 8 6 4 2 0 = 2-pos. = 5-pos. = 20-pos. 0 20 40 60 80 100 Ambient temperature [C] Type: DFMC 1,5/...-ST-3,5 with DMC 1,5/...-G1-3,5 P20 THR Use of the CP-DMC... coding profile Classifications eCl@ss eCl@ss 10.0.1 27440309 eCl@ss 11.0 27460202 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 01/03/2021Page6/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Classifications eCl@ss eCl@ss 7.0 27440309 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC002638 ETIM 7.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals IECEE CB Scheme / VDE Gutachten mit Fertigungsuberwachung / EAC / cULus Recognized Ex Approvals Approval details IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 160 V DE1-60359_B1_B2 01/03/2021Page7/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Approvals Nominal current IN 8A VDE Gutachten mit Fertigungsuberwachung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 160 V Nominal current IN 8A mm/AWG/kcmil 0.2-1.5 40038423 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19920306 B C D Nominal voltage UN 300 V 50 V 300 V Nominal current IN 8A 8A 8A mm/AWG/kcmil 24-16 24-16 24-16 Accessories Accessories Coding element Coding profile-CP-DMC 1,5 NAT-1790647 Coding profile, for insertion between the coding ribs of the connector and the header following the reflow soldering process, insulating material, color: natural Crimping tool 01/03/2021Page8/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Accessories Crimping pliers-CRIMPFOX 6-1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25mm...6.0mm, lateral entry, trapezoidal crimp Screwdriver tools Screwdriver-SZS 0,4X2,5 VDE-1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip Additional products Printed-circuit board connector-DMC 1,5/ 4-G1-3,5 P20THR-1786853 PCB header, nominal cross section: 1.5 mm, color: black, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 8, Number of rows: 2, Number of positions per row: 4, number of connections: 8, product range: DMC 1,5/..-G1-THR, pitch: 3.5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm, Stecksystem: MINI COMBICON - DFMC 1,5, Locking: without, type of packaging: packed in cardboard Printed-circuit board connector-DMCV 1,5/ 4-G1-3,5 P20THR-1787221 PCB header, nominal cross section: 1.5 mm, color: black, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 8, Number of rows: 2, Number of positions per row: 4, number of connections: 8, product range: DMCV 1,5/..-G1-THR, pitch: 3.5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm, Stecksystem: MINI COMBICON - DFMC 1,5, Locking: without, type of packaging: packed in cardboard Printed-circuit board connector-DMC 1,5/ 4-G1-3,5 P20THR R44-1816153 PCB header, nominal cross section: 1.5 mm, color: black, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 8, Number of rows: 2, Number of positions per row: 4, number of connections: 8, product range: DMC 1,5/..-G1-THR, pitch: 3.5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm, Stecksystem: MINI COMBICON - DFMC 1,5, Locking: without, type of packaging: 44 mm wide tape 01/03/2021Page9/10 https://www.phoenixcontact.com/us/products/1790124 Printed-circuit board connector-DFMC 1,5/ 4-ST-3,5-1790124 Accessories Printed-circuit board connector-DMCV 1,5/ 4-G1-3,5 P20THR R44-1818591 PCB header, nominal cross section: 1.5 mm, color: black, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 8, Number of rows: 2, Number of positions per row: 4, number of connections: 8, product range: DMCV 1,5/..-G1-THR, pitch: 3.5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm, Stecksystem: MINI COMBICON - DFMC 1,5, Locking: without, type of packaging: 44 mm wide tape Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/03/2021Page10/10