HGTG20N60A4D Data Sheet February 2009 600V, SMPS Series N-Channel IGBT with Anti-Parallel Hyperfast Diode The HGTG20N60A4D is a MOS gated high voltage switching device combining the best features of MOSFETs and bipolar transistors. This device has the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. The much lower on-state voltage drop varies only moderately between 25oC and 150oC. The IGBT used is the development type TA49339. The diode used in anti-parallel is the development type TA49372. This IGBT is ideal for many high voltage switching applications operating at high frequencies where low conduction losses are essential. This device has been optimized for high frequency switch mode power supplies. Features * >100kHz Operation At 390V, 20A * 200kHz Operation At 390V, 12A * 600V Switching SOA Capability * Typical Fall Time . . . . . . . . . . . . . . . . 55ns at TJ = 125oC * Low Conduction Loss * Temperature Compensating SABERTM Model www.fairchildsemi.com Packaging JEDEC STYLE TO-247 Formerly Developmental Type TA49341. Ordering Information PART NUMBER PACKAGE HGTG20N60A4D TO-247 BRAND 20N60A4D COLLECTOR (FLANGE) NOTE: When ordering, use the entire part number. Symbol C G E FAIRCHILD SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS 4,364,073 4,598,461 4,682,195 4,803,533 4,888,627 4,417,385 4,605,948 4,684,413 4,809,045 4,890,143 4,430,792 4,620,211 4,694,313 4,809,047 4,901,127 4,443,931 4,631,564 4,717,679 4,810,665 4,904,609 4,466,176 4,639,754 4,743,952 4,823,176 4,933,740 (c)2009 Fairchild Semiconductor Corporation 4,516,143 4,639,762 4,783,690 4,837,606 4,963,951 4,532,534 4,641,162 4,794,432 4,860,080 4,969,027 4,587,713 4,644,637 4,801,986 4,883,767 HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified Collector to Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BVCES Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25 At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110 Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ICM Diode Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFM110 Diode Maximum Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFM Gate to Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES Gate to Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGEM Switching Safe Operating Area at TJ = 150oC (Figure 2) . . . . . . . . . . . . . . . . . . . . . . . SSOA Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Lead Temperature for Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL HGTG20N60A4D 600 UNITS V 70 40 280 20 80 20 30 100A at 600V 290 2.32 -55 to 150 260 A A A A A V V W W/oC oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE 1: Pulse width limited by maximum junction temperature. Electrical Specifications TJ = 25oC, Unless Otherwise Specified PARAMETER Collector to Emitter Breakdown Voltage Collector to Emitter Leakage Current Collector to Emitter Saturation Voltage Gate to Emitter Threshold Voltage SYMBOL BVCES ICES VCE(SAT) VGE(TH) TEST CONDITIONS IC = 250A, VGE = 0V VCE = 600V IC = 20A, VGE = 15V TJ = 25oC TJ = 125oC TJ = 25oC TJ = 125oC IC = 250A, VCE = 600V Gate to Emitter Leakage Current IGES VGE = 20V Switching SOA SSOA TJ = 150oC, RG = 3, VGE = 15V, L = 100H, VCE = 600V Gate to Emitter Plateau Voltage VGEP Turn-On Energy (Note 3) EON1 Turn-On Energy (Note 3) EON2 Turn-Off Energy (Note 2) EOFF Current Turn-On Delay Time Current Rise Time Current Turn-Off Delay Time Current Fall Time td(ON)I trI td(OFF)I tfI - V - - 250 A - - 3.0 mA - 1.8 2.7 V - 1.6 2.0 V 4.5 5.5 7.0 V nA - A IC = 20A, VCE = 300V - 8.6 - V VGE = 15V - 142 162 nC VGE = 20V - 182 210 nC - 15 - ns - 12 - ns - 73 - ns - 32 - ns - 105 - J - 280 350 J - 150 200 J - 15 21 ns - 13 18 ns - 105 135 ns - 55 73 ns IGBT and Diode at TJ = 25oC, ICE = 20A, VCE = 390V, VGE = 15V, RG = 3, L = 500H, Test Circuit Figure 24 tfI - 250 td(ON)I Current Fall Time 600 - Current Turn-On Delay Time td(OFF)I UNITS - IC = 20A, VCE = 300V Current Turn-Off Delay Time MAX - Qg(ON) trI TYP 100 On-State Gate Charge Current Rise Time MIN IGBT and Diode at TJ = 125oC, ICE = 20A, VCE = 390V, VGE = 15V, RG = 3, L = 500H, Test Circuit Figure 24 Turn-On Energy (Note 3) EON1 - 115 - J Turn-On Energy (Note 3) EON2 - 510 600 J Turn-Off Energy (Note 2) EOFF - 330 500 J (c)2009 Fairchild Semiconductor Corporation HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D Electrical Specifications TJ = 25oC, Unless Otherwise Specified (Continued) PARAMETER SYMBOL Diode Forward Voltage TEST CONDITIONS VEC Diode Reverse Recovery Time trr Thermal Resistance Junction To Case RJC MIN TYP MAX UNITS IEC = 20A - 2.3 - V IEC = 20A, dIEC/dt = 200A/s - 35 - ns IEC = 1A, dIEC/dt = 200A/s - 26 - ns IGBT - - 0.43 oC/W Diode - - 1.9 oC/W NOTE: 1. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). All devices were tested per JEDEC Standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss. 2. Values for two Turn-On loss conditions are shown for the convenience of the circuit designer. EON1 is the turn-on loss of the IGBT only. EON2 is the turn-on loss when a typical diode is used in the test circuit and the diode is at the same TJ as the IGBT. The diode type is specified in Figure 20. Unless Otherwise Specified DIE CAPABILITY VGE = 15V 80 60 PACKAGE LIMIT 40 20 0 25 50 75 100 125 150 120 TJ = 150oC, RG = 3, VGE = 15V, L = 100H 100 80 60 40 20 0 100 0 TC , CASE TEMPERATURE (oC) fMAX, OPERATING FREQUENCY (kHz) 500 TC VGE 75oC 15V 300 fMAX1 = 0.05 / (td(OFF)I + td(ON)I) 100 fMAX2 = (PD - PC) / (EON2 + EOFF) PC = CONDUCTION DISSIPATION (DUTY FACTOR = 50%) ReJC = 0.43oC/W, SEE NO TJ = 125oC, RG = 3, L = 500H, V CE = 390V 10 20 300 400 500 600 700 FIGURE 2. MINIMUM SWITCHING SAFE OPERATING AREA 30 40 50 tSC , SHORT CIRCUIT WITHSTAND TIME (s) FIGURE 1. DC COLLECTOR CURRENT vs CASE TEMPERATURE 40 5 200 VCE, COLLECTOR TO EMITTER VOLTAGE (V) ICE, COLLECTOR TO EMITTER CURRENT (A) 14 VCE = 390V, RG = 3, TJ = 125oC 12 450 400 ISC 10 350 8 300 6 250 4 200 tSC 2 0 150 10 11 12 13 14 100 15 ISC, PEAK SHORT CIRCUIT CURRENT (A) ICE , DC COLLECTOR CURRENT (A) 100 ICE, COLLECTOR TO EMITTER CURRENT (A) Typical Performance Curves VGE , GATE TO EMITTER VOLTAGE (V) FIGURE 3. OPERATING FREQUENCY vs COLLECTOR TO EMITTER CURRENT (c)2009 Fairchild Semiconductor Corporation FIGURE 4. SHORT CIRCUIT WITHSTAND TIME HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D 100 Unless Otherwise Specified (Continued) DUTY CYCLE < 0.5%, VGE = 12V PULSE DURATION = 250s 80 60 40 TJ = 125oC 20 TJ = 25oC TJ = 150oC 0 0.4 0 0.8 1.2 1.6 2.0 2.4 2.8 3.2 ICE, COLLECTOR TO EMITTER CURRENT (A) ICE, COLLECTOR TO EMITTER CURRENT (A) Typical Performance Curves 100 DUTY CYCLE < 0.5%, VGE = 15V PULSE DURATION = 250s 80 60 40 TJ = 125oC 20 TJ = 150oC 0 0 FIGURE 5. COLLECTOR TO EMITTER ON-STATE VOLTAGE 1.2 1.6 2.0 2.4 2.8 800 RG = 3, L = 500H, VCE = 390V EOFF, TURN-OFF ENERGY LOSS (J) EON2 , TURN-ON ENERGY LOSS (J) 0.8 FIGURE 6. COLLECTOR TO EMITTER ON-STATE VOLTAGE 1400 1200 1000 TJ = 125oC, VGE = 12V, VGE = 15V 800 600 400 200 TJ = 25oC, VGE = 12V, VGE = 15V 0 5 RG = 3, L = 500H, VCE = 390V 700 600 500 TJ = 125oC, VGE = 12V OR 15V 400 300 200 TJ = 25oC, VGE = 12V OR 15V 100 0 10 15 20 25 30 35 ICE , COLLECTOR TO EMITTER CURRENT (A) 5 40 10 15 20 25 30 35 40 ICE , COLLECTOR TO EMITTER CURRENT (A) FIGURE 7. TURN-ON ENERGY LOSS vs COLLECTOR TO EMITTER CURRENT FIGURE 8. TURN-OFF ENERGY LOSS vs COLLECTOR TO EMITTER CURRENT 36 22 RG = 3, L = 500H, VCE = 390V RG = 3, L = 500H, VCE = 390V 32 20 TJ = 25oC, TJ = 125oC, VGE = 12V trI , RISE TIME (ns) td(ON)I, TURN-ON DELAY TIME (ns) 0.4 VCE, COLLECTOR TO EMITTER VOLTAGE (V) VCE, COLLECTOR TO EMITTER VOLTAGE (V) 18 16 14 12 TJ = 25oC, TJ = 125oC, VGE = 15V 10 8 TJ = 25oC TJ = 25oC, TJ = 125oC, VGE = 12V 28 24 20 16 12 TJ = 25oC OR TJ = 125oC, VGE = 15V 8 4 5 10 15 20 25 30 35 40 ICE , COLLECTOR TO EMITTER CURRENT (A) FIGURE 9. TURN-ON DELAY TIME vs COLLECTOR TO EMITTER CURRENT 5 10 15 20 25 30 35 40 ICE , COLLECTOR TO EMITTER CURRENT (A) FIGURE 10. TURN-ON RISE TIME vs COLLECTOR TO EMITTER CURRENT (c)2009 Fairchild Semiconductor Corporation HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D Typical Performance Curves Unless Otherwise Specified (Continued) 80 RG = 3, L = 500H, VCE = 390V RG = 3, L = 500H, VCE = 390V 72 110 VGE = 12V, VGE = 15V, TJ = 125oC tfI , FALL TIME (ns) td(OFF)I , TURN-OFF DELAY TIME (ns) 120 100 90 80 TJ = 125oC, VGE = 12V OR 15V 56 48 TJ = 25oC, VGE = 12V OR 15V 40 32 VGE = 12V, VGE = 15V, TJ = 25oC 70 60 64 24 5 10 15 20 25 30 35 16 40 5 10 ICE , COLLECTOR TO EMITTER CURRENT (A) VGE, GATE TO EMITTER VOLTAGE (V) ICE, COLLECTOR TO EMITTER CURRENT (A) 16 DUTY CYCLE < 0.5%, VCE = 10V PULSE DURATION = 250s 160 120 TJ = 25oC TJ = 125oC TJ = -55oC 40 30 35 40 IG(REF) IG(REF)==1mA, 1mA,RRLL==15, 15,TTJJ==25 25ooCC 14 12 VCE = 600V VCE = 400V 10 8 VCE = 200V 6 4 2 0 0 6 7 8 9 11 10 0 12 20 40 1.8 RG = 3, L = 500H, VCE = 390V, VGE = 15V ETOTAL = EON2 + EOFF 1.4 1.2 ICE = 30A 1.0 0.8 ICE = 20A 0.6 0.4 ICE = 10A 0.2 0 25 50 75 100 125 150 TC , CASE TEMPERATURE (oC) FIGURE 15. TOTAL SWITCHING LOSS vs CASE TEMPERATURE 80 100 120 140 160 FIGURE 14. GATE CHARGE WAVEFORMS ETOTAL, TOTAL SWITCHING ENERGY LOSS (mJ) FIGURE 13. TRANSFER CHARACTERISTIC 1.6 60 QG, GATE CHARGE (nC) VGE, GATE TO EMITTER VOLTAGE (V) ETOTAL, TOTAL SWITCHING ENERGY LOSS (mJ) 25 FIGURE 12. FALL TIME vs COLLECTOR TO EMITTER CURRENT 240 80 20 ICE , COLLECTOR TO EMITTER CURRENT (A) FIGURE 11. TURN-OFF DELAY TIME vs COLLECTOR TO EMITTER CURRENT 200 15 TJ = 125oC, L = 500H, VCE = 390V, VGE = 15V ETOTAL = EON2 + EOFF 10 ICE = 30A 1 ICE = 20A ICE = 10A 0.1 3 10 1000 100 RG, GATE RESISTANCE () FIGURE 16. TOTAL SWITCHING LOSS vs GATE RESISTANCE (c)2009 Fairchild Semiconductor Corporation HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D Unless Otherwise Specified (Continued) 5 C, CAPACITANCE (nF) FREQUENCY = 1MHz 4 3 CIES 2 1 COES CRES 0 0 20 40 60 80 100 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Typical Performance Curves 2.2 DUTY CYCLE < 0.5%, TJ = 25oC PULSE DURATION = 250s 2.1 2.0 ICE = 30A ICE = 20A 1.9 1.8 1.7 ICE = 10A 8 9 VCE , COLLECTOR TO EMITTER VOLTAGE (V) FIGURE 17. CAPACITANCE vs COLLECTOR TO EMITTER VOLTAGE 11 12 13 14 15 90 DUTY CYCLE < 0.5%, PULSE DURATION = 250s dIEC/dt = 200A/s 80 trr, RECOVERY TIMES (ns) 25 20 125oC 15 25oC 10 5 125oC trr 70 125oC tb 60 125oC ta 50 40 30 25oC trr 20 25oC ta 10 0 0 0.5 1.0 1.5 2.0 2.5 0 3.0 25oC tb 4 0 8 IEC = 20A, VCE = 390V 40 125oC ta 30 125oC tb 20 25oC ta 10 0 200 25oC tb 300 400 500 600 700 800 20 FIGURE 20. RECOVERY TIMES vs FORWARD CURRENT 900 Qrr, REVERSE RECOVERY CHARGE (nC) FIGURE 19. DIODE FORWARD CURRENT vs FORWARD VOLTAGE DROP 50 16 12 IEC , FORWARD CURRENT (A) VEC , FORWARD VOLTAGE (V) trr , RECOVERY TIMES (ns) 16 FIGURE 18. COLLECTOR TO EMITTER ON-STATE VOLTAGE vs GATE TO EMITTER VOLTAGE 30 IEC , FORWARD CURRENT (A) 10 VGE, GATE TO EMITTER VOLTAGE (V) 1000 800 VCE = 390V 125oC, IEC = 20A 600 125oC, IEC = 10A 400 25oC, IEC = 20A 200 25oC, IEC = 10A 0 200 300 400 500 600 700 800 900 1000 diEC/dt, RATE OF CHANGE OF CURRENT (A/s) diEC/dt, RATE OF CHANGE OF CURRENT (A/s) FIGURE 21. RECOVERY TIMES vs RATE OF CHANGE OF CURRENT FIGURE 22. STORED CHARGE vs RATE OF CHANGE OF CURRENT (c)2009 Fairchild Semiconductor Corporation HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D ZJC , NORMALIZED THERMAL RESPONSE Typical Performance Curves Unless Otherwise Specified (Continued) 100 0.5 0.2 10-1 0.1 0.05 0.02 0.01 10-2 t1 DUTY FACTOR, D = t1 / t2 PEAK TJ = (PD X ZJC X RJC) + TC SINGLE PULSE 10-5 10-4 10-3 10-2 PD t2 10-1 100 t1 , RECTANGULAR PULSE DURATION (s) FIGURE 23. IGBT NORMALIZED TRANSIENT THERMAL RESPONSE, JUNCTION TO CASE Test Circuit and Waveforms HGTG20N60A4D DIODE TA49372 90% 10% VGE EON2 EOFF L = 500H VCE RG = 3 90% DUT + - ICE VDD = 390V 10% td(OFF)I tfI trI td(ON)I FIGURE 24. INDUCTIVE SWITCHING TEST CIRCUIT FIGURE 25. SWITCHING TEST WAVEFORMS (c)2009 Fairchild Semiconductor Corporation HGTG20N60A4D Rev. C1 http://store.iiic.cc/ HGTG20N60A4D Handling Precautions for IGBTs Operating Frequency Information Insulated Gate Bipolar Transistors are susceptible to gate-insulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler's body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken: Operating frequency information for a typical device (Figure 3) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 6, 7, 8, 9 and 11. The operating frequency plot (Figure 3) of a typical device shows fMAX1 or fMAX2; whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature. 1. Prior to assembly into a circuit, all leads should be kept shorted together either by the use of metal shorting springs or by the insertion into conductive material such as "ECCOSORBDTM LD26" or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are essentially capacitors. Circuits that leave the gate opencircuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic Zener diode from gate to emitter. If gate protection is required an external Zener is recommended. fMAX1 is defined by fMAX1 = 0.05/(td(OFF)I+ td(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on-state time for a 50% duty factor. Other definitions are possible. td(OFF)I and td(ON)I are defined in Figure 25. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM . td(OFF)I is important when controlling output ripple under a lightly loaded condition. fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON2). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RJC. The sum of device switching and conduction losses must not exceed PD . A 50% duty factor was used (Figure 3) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON2 and EOFF are defined in the switching waveforms shown in Figure 25. EON2 is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss (ICE x VCE) during turn-off. All tail losses are included in the calculation for EOFF; i.e., the collector current equals zero (ICE = 0). (c)2009 Fairchild Semiconductor Corporation HGTG20N60A4D Rev. C1 http://store.iiic.cc/ TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet SeriesTM ACExTM FAST(R) ActiveArrayTM FASTrTM BottomlessTM FRFETTM CoolFETTM CROSSVOLTTM GlobalOptoisolatorTM GTOTM DOMETM HiSeCTM EcoSPARKTM I2CTM E2CMOSTM EnSignaTM ImpliedDisconnectTM FACTTM ISOPLANARTM Across the board. Around the world.TM The Power FranchiseTM Programmable Active DroopTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UltraFET(R) VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I5 http://store.iiic.cc/