rev 12.10.03
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600 E urope (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
100
Special Features
Electrical Specs
110 Watts
LPS110 Series
Input
Input range 85-264 VAC
120-300 VDC
Frequency 47-440 Hz
Inrush current <18 A peak @ 115 VAC;
<36 A peak @ 230 VAC,
cold start @ 25°C
Input current 2.5 A max. (RMS) @ 115 VAC
Efficiency 70% typical at full load
EMI filter FCC Class B conducted
CISPR 22 Class B conducted
EN55022 Class B conducted
VDE 0878 PT3 Class B conducted
Safety ground
leakage current <0.5 mA @ 50/60 Hz, 264 VAC-input
Output
Maximum power 80 W for convection;
110 W with 30 CFM forced air
Adjustment range ±5% minimum
Hold-up time 20 ms @80 W load, 115 VAC nominal
line
Overload protection Short circuit protection. Case overload
protected @ 110-145% above peak
rating
Overvoltage protection 5 V output: 5.7-6.7 VDC. O ther outputs
10% to 20% above nominal output.
Latching type, recycle AC to reset.
Logic Control
Power failure TTL logic signal goes high 50-150 msec
after main output. It goes low at least 4
msec before loss of regulation.
Remote sense Compensates for 0.5 V lead drop min.
Will operate without remote sense
connected. Reverse connection
protected.
•Universal input
•High efficiency
•Remote sense
•Built-in EMI filter
•Low output ripple
•Adjustable output
•Power fail
•Overvoltage protection
•Overload protection
•Optional L bracket (-B suffix)
•Cover kit available LPX110-C
Operating temperature: 0° to 50°C ambient
derate each output at 2.5% per degree from
50° to 70°C
Electromagnetic susceptibility: Designed to
meet IEC 801, -2, -3, -4, -5, -6, L evel 3
Humidity: Operating; non-condensing
5% to 95%
Vibration: Three orthogonal axes, sweep at
1 oct/min, 5 min. dwell at four major resonances
0.75 G peak 5 Hz to 500 Hz, operational
Storage temperature: -40° to 85°C
Temperature coefficient: ±.04% per °C
MTBF demonstrated: >550,000 hours at full load
and 25°C ambient conditions
Environmental
Safety
VDE 0805/EN60950 (IEC950) 11774-3336-1245 (LC #84997)
UL UL1950 E132002
CSA CSA 22.2-234 Level 3 LR53982C
NEMKO EN 60950/EMKO-TUE P95100376
(74-sec) 203
CB Certificate and report 1563, 1564, 1565, 1566, 1567
CE Mark (LVD)
Total Power: 80-110 Watts
Input Voltage: 85-264 VAC
120-300 VDC
# of Outputs: Single
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
101
www.astecpower.com
Ordering Information
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
4.0"
(101.6)
3.5"
(88.9)
0.25"
(6.35)
0.25"
(6.35)
6.5"
(165.1) 7.0"
(177.8)
1.80"
(45.7)
0.12"
(3)
SK 1
SK 2
1
2
3
4
5
6
7
8
9
0.156" (4)
DIA (4 places)
1
3N
L
GND
SK 202
(POK)
1 2
SK 201
(+S) 1
(-S) 2
VOLTAGE ADJ
M1
M2
Model Output Minimum Maximum Load with Maximum Load with Peak Regulation2 Ripple
Num ber Voltage Load Convection Cooling 30 CFM Forced Air Load1 P/P (PARD)3
LPS113 12 V 0 A 6.7 A 9.2 A 10.4 A ±2% 120 mV
LPS114 15 V 0 A 5.3 A 7.3 A 8.3 A ±2% 150 mV
LPS115 24 V 0 A 3.3 A 4.6 A 5.2 A ±2% 240 mV
LPS118 48 V 0 A 1.7 A 2.3 A 2.6 A ±2% 480 mV
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF in p arallel with a 0.1 µF capacitor at rated line voltage and load.
Note: -B suffix added to model number indicates L bracket option.
ConnectorLPS113 LPS114 LPS115 LPS118
SK1-1 GND GND GND GND
SK1-3 Neutral Neutral Neutral Neutral
SK1-5 Line Line Line Line
SK2-1 +12 V +15 V +24 V +48 V
SK2-2 +12 V +15 V +24 V +48 V
SK2-3 +12 V +15 V +24 V +48 V
SK2-4 Common Common Common Common
SK2-5 Common Common Common Common
SK2-6 Common Common Common Common
SK2-7 Common Common Common Common
SK2-8 +12 V +15 V +24 V +48 V
SK2-9 +12 V +15 V +24 V +48 V
SK201-1 +sense +sense +sense +sense
SK201-2 -sense -sense -sense -sense
SK202-1 Pok Pok Pok Pok
SK202-2 GND GND GND GND
Mating Connectors
AC Input: Molex 09-50-8051 (USA)
09-91-0500 (UK)
PINS: 08-58-0111
DC Outputs: Molex 09-50-8091 (USA)
09-91-0900 (UK)
PINS: 08-58-0111
Remote sense/power fail:
Molex 22-01-1022 (USA)
22-01-1023 (UK)
PINS: 08-50-0114
Astec Connector Kit #70-841-007, includes all of the above
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. Specifications are for convection rating at factory settings unless
otherwise stated.
4. Mounting holes M1 and M2 should be grounded for EMI purposes.
5. Mounting hole M1 is safety ground connection.
6. L Bracket mounting (6-32) maximum insertion depth is .20” (5).
7. Warranty: 2 year
8. Weight: 1.25 lb / 0.57 kg
Pin Assignments
LPS110 Series
4.28"
(108.6)
2.5"
(63.5)
6.4"
(162.6) 7.3"
(185.5)
2.2"
(56)
5.9"
(150.0)
0.86"
(21.8)
#6-32 PEM
6 places
-B Bracket
