BAW156... Silicon Low Leakage Diode * Low-leakage applications * Medium speed switching times * Common anode configuration BAW156 ! , , Type BAW156 Package SOT23 Configuration common anode Marking JZs Maximum Ratings at TA = 25C, unless otherwise specified Parameter Symbol Diode reverse voltage VR 80 Peak reverse voltage VRM 85 Forward current IF 200 Repetitive peak forward current IFRM Non-repetitive peak surge forward current IFSM Value - Unit V mA A t = 1 s 4.5 t=1s 0.5 Ptot 250 mW Junction temperature Tj 150 C Storage temperature Tstg Thermal Resistance Parameter Symbol Value Unit Junction - soldering point1) RthJS 360 K/W Total power dissipation Ts 31C -65 ... 150 BAW156 1For calculation of RthJA please refer to Application Note Thermal Resistance 1 2005-10-18 BAW156... Electrical Characteristics at TA = 25C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. DC Characteristics 85 V Breakdown voltage V(BR) I(BR) = 100 A Reverse current IR nA VR = 75 V - - 5 VR = 75 V, TA = 150 C - - 80 Forward voltage mV VF IF = 1 mA - - 900 IF = 10 mA - - 1000 IF = 50 mA - - 1100 IF = 150 mA - - 1250 CT - 2 - pF trr - 0.6 1.5 s AC Characteristics Diode capacitance VR = 0 V, f = 1 MHz Reverse recovery time IF = 10 mA, IR = 10 mA, measured at IR = 1mA, RL = 100 Test circuit for reverse recovery time D.U.T. F Pulse generator: tp = 10s, D = 0.05, tr = 0.6ns, Ri = 50 Oscillograph Oscillograph: R = 50, tr = 0.35ns, C 1pF EHN00019 2 2005-10-18 BAW156... Reverse current IR = (TA) Forward Voltage VF = (TA) IF = Parameter VR = 70V 10 2 R BAW 156 EHB00106 BAW 156 1.5 EHB00109 V nA VF max 10 1 F = 150 mA 1.0 10 0 50 mA 10 mA 1 mA typ 10 -1 0.1 mA 0.5 10 -2 10 -3 0 0 50 100 C 150 0 50 100 TA Forward current IF = (T S) TA = 25C BAW156 EHB00107 250 mA mA 200 175 100 IF F BAW 156 150 TA Forward current IF = (VF) 150 C typ max 150 125 100 50 75 50 25 0 0 0.5 1.0 V 0 0 1.5 15 30 45 60 75 90 105 120 C 150 TS VF 3 2005-10-18 BAW156... Permissible Puls Load RthJS = (tp) Permissible Pulse Load IFmax / I FDC = (t p) 10 2 I Fmax/IFDC 10 3 RthJS 10 2 10 1 10 -1 -7 10 10 -6 10 -5 10 -4 10 -3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0 10 0 - 10 -2 s 10 10 0 -6 10 0 TP 10 -5 10 -4 10 -3 10 -2 s 10 0 TP 4 2005-10-18 Package SOT23 BAW156... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 0.1 1 2.4 0.15 3 0.1 MAX. 10 MAX. B 1 0.1 10 MAX. 2.9 0.1 0.15 MIN. Package Outline A 5 0...8 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 1.2 0.9 1.3 0.9 0.8 Marking Layout 12 s Date code (Year/Month) Pin 1 EH s Type code 37 Manufacturer 2003, July BCW66 Example Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 5 2005-10-18 BAW156... Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 Munchen (c) Infineon Technologies AG 2005. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.Infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2005-10-18