PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Features Description * Phase jitter filter for PCIe(R) 2.0 application Pericom Semiconductor's PI6C20400A is a PCIe(R) 2.0 compliant high-speed, low-noise differential clock buffer designed to be companion to PI6C410BS. The device distributes the differential SRC clock from PI6C410BS to four differential pairs of clock outputs either with or without PLL. The clock outputs are controlled by input selection of SRC_STOP#, PWRDWN# and SMBus, SCLK and SDA. When input of either SRC_STOP# or PWRDWN# is low, the output clocks are Tristated. When PWRDWN# is low, the SDA and SCLK inputs must be Tri-stated. * Four Pairs of Differential Clocks * Low skew < 50ps * Low jitter < 50ps cycle-to-cycle * < 1 ps additive RMS phase jitter * Output Enable for all outputs * Outputs tristate control via SMBus * Programmable PLL Bandwidth * 100 MHz PLL Mode operation * 100 - 400 MHz Bypass Mode operation * 3.3V Operation * Packaging (Pb-free and Green): 28-Pin SSOP (H28) 28-Pin TSSOP (L28) Block Diagram OE_INV OE_0 & OE_3 SRC_STOP# PWRDWN# SCLK SDA Pin Configuration OUT0 OUT0# OUT1 OUT1# SMBus Controller OUT2 OUT2# PLL/BYPASS# OUT3 OUT3# SRC SRC# PLL_BW# 14-0195 VDD SRC SRC# VSS VDD OUT0 OUT0# OE_0 OUT1 OUT1# VDD PLL/BYPASS# SCLK SDA Output Control DIV PLL 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VDD_A VSS_A IREF OE_INV VDD OUT3 OUT3# OE_3 OUT2 OUT2# VDD PLL_BW# SRC_STOP# PWRDWN# www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Pin Descriptions Type Pin Name Pin No Description SRC & SRC# Input 2, 3 0.7V Differential SRC input from PI6C410 clock synthesizer OE_0 & OE_3 Input 8, 21 3.3V LVTTL input for enabling outputs, active high. OE_0 for OUT0 / OUT0# OE_3 for OUT3 / OUT3# OE_INV Input 25 3.3V LVTTL input for inverting the OE, SRC_STOP# and PWRDWN# pins. When 0 = same stage When 1 = OE_0, OE_3, SRC_STOP#, PWRDWN# inverted. OUT[0:3] & OUT[0:3]# Output 6, 7, 9, 10, 19, 20, 22, 23 0.7V Differential outputs PLL/BYPASS# Input 12 3.3V LVTTL input for selecting fan-out of PLL operation. SCLK Input 13 SMBus compatible SCLOCK input SDA I/O 14 SMBus compatible SDATA IREF Input 26 External resistor connection to set the differential output current SRC_STOP# Input 16 3.3V LVTTL input for SRC stop, active low PLL_BW# Input 17 3.3V LVTTL input for selecting the PLL bandwidth PWRDWN# Input 15 3.3V LVTTL input for Power Down operation, active low VDD Power 1, 5, 11, 18, 24 3.3V Power Supply for Outputs VSS Ground 4 Ground for Outputs VSS_A Ground 27 Ground for PLL VDD_A Power 28 3.3V Power Supply for PLL Serial Data Interface (SMBus) This part is a slave only SMBus device that supports indexed block read and indexed block write protocol using a single 7-bit address and read/write bit as shown below. Address Assignment A6 A5 A4 A3 A2 A1 A0 W/R 1 1 0 1 1 1 0 0/1 Data Protocol 1 bit 7 bits 1 1 8 bits 1 8 bits 1 8 bits 1 Start bit Slave Addr R/W Ack Register offset Ack Byte Count =N Ack Data Byte 0 Ack ... 8 bits 1 1 bit Data Byte N -1 Ack Stop bit Notes: 1. Register offset for indicating the starting register for indexed block write and indexed block read. Byte Count in write mode cannot be 0. 14-0195 2 www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Data Byte 0: Control Register Bit Descriptions Type Power Up Condition Output(s) Affected Source Pin 0 Outputs Mode 0 = Divide by 2 1 = Normal RW 1 = Normal OUT[0:3], OUT[0:3]# NA 1 PLL/BYPASS# 0 = Fanout 1 = PLL RW 1 = PLL OUT[0:3], OUT[0:3]# NA 2 PLL Bandwidth 0 = High Bandwidth, 1 = Low Bandwidth RW 1 = Low OUT[0:3], OUT[0:3]# NA 3 Reserved NA 4 Reserved NA 5 Reserved NA 6 SRC_STOP# 0 = Driven when stopped 1 = Tristate RW 0 = Driven when stopped OUT[0:3], OUT[0:3]# NA 7 PWRDWN# 0 = Driven when stopped 1 = Tristate RW 0 = Driven when stopped OUT[0:3], OUT[0:3]# NA Type Power Up Condition Output(s) Affected Source Pin Data Byte 1: Control Register Bit Descriptions 0 Reserved 1 2 OUTPUTS enable 1 = Enabled 0 = Disabled 3 Reserved NA 4 Reserved NA 5 6 OUTPUTS enable 1 = Enabled 0 = Disabled 7 Reserved 14-0195 NA RW 1 = Enabled OUT0, OUT0# NA RW 1 = Enabled OUT1, OUT1# NA RW 1 = Enabled OUT2, OUT2# NA RW 1 = Enabled OUT3, OUT3# NA NA 3 www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Data Byte 2: Control Register Bit Descriptions 0 Reserved 1 Allow control of OUTPUTS with assertion of SRC_STOP# 0 = Free running 1 = Stopped with SRC_Stop# 2 Type Power Up Condition Output(s) Affected Source Pin NA RW 0 = Free running OUT0, OUT0# NA RW 0 = Free running OUT1, OUT1# NA 3 Reserved NA 4 Reserved NA 5 Allow control of OUTPUTS with assertion of SRC_STOP# 0 = Free running 1 = Stopped with SRC_Stop# 6 7 RW 0 = Free running OUT2, OUT2# NA RW 0 = Free running OUT3, OUT3# NA Reserved NA Data Byte 3: Control Register Power Up Condition Output(s) Affected Source Pin Type Power Up Condition Output(s) Affected Pin 0 R 0 NA NA 1 R 0 NA NA 2 R 0 NA NA R 0 NA NA R 0 NA NA 5 R 1 NA NA 6 R 0 NA NA 7 R 0 NA NA Bit Descriptions Type 0 RW 1 RW 2 RW 3 Reserved 4 RW RW 5 RW 6 RW 7 RW Data Byte 4: Pericom ID Register Bit Descriptions 3 Pericom ID 4 14-0195 4 www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Functionality PWRDWN# OUT OUT# SRC_Stop# OUT OUT# 1 Normal Normal 1 Normal Normal 0 IREF x 2 or Float Low 0 IREF x 6 or Float Low Power Down (PWRDWN# assertion) PWRDWN# OUT OUT# Figure 1. Power down sequence Power Down (PWRDWN# De-assertion) Tstable <1ms PWRDWN# OUT OUT# Tdrive_PwrDwn# <300us, >200mV Figure 2. Power down de-assert sequence 14-0195 5 www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Current-mode output buffer characteristics of OUT[0:3], OUT[0:3]# VDD (3.3V 5%) Slope ~ 1/Rs RO IOUT ROS Iout VOUT = 0.85V max 0V 0.85V Figure 9. Simplified diagram of current-mode output buffer Differential Clock Buffer characteristics Symbol Minimum Maximum RO 3000 N/A ROS unspecified unspecified VOUT N/A 850mV Current Accuracy Symbol Conditions Configuration IOUT VDD = 3.30 5% RREF = 475 1% IREF = 2.32mA Load Nominal test load for given configuration Min. Max. -12% INOMINAL +12% INOMINAL Note: 1. INOMINAL refers to the expected current based on the configuration of the device. Differential Clock Output Current Board Target Trace/Term Z Reference R, Iref = VDD/(3xRr) Output Current VOH @ Z 100 (100 differential 15% coupling ratio) RREF = 475 1%, IREF = 2.32mA IOH = 6 x IREF 0.7V @ 50 14-0195 6 www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Absolute Maximum Ratings (Over operating free-air temperature range) Symbol VDD_A Parameters Min. Max. 3.3V Core Supply Voltage -0.5 4.6 VDD 3.3V I/O Supply Voltage -0.5 4.6 VIH Input High Voltage VIL Input Low Voltage -0.5 Storage Temperature -65 Ts VESD Units V 4.6 ESD Protection 150 C 2000 V Note: 1. Stress beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. DC Electrical Characteristics (VDD = 3.35%, VDD_A = 3.35%) Symbol Parameters VDD_A Min. Max. 3.3V Core Supply Voltage 3.135 3.465 VDD 3.3V I/O Supply Voltage 3.135 3.465 VIH 3.3V Input High Voltage 2.0 VDD + 0.3 VIL 3.3V Input Low Voltage VSS - 0.3 0.8 IIL Input Leakage Current 0 < VIN < VDD -5 +5 VOH 3.3V Output High Voltage IOH = -1mA 2.4 VOL 3.3V Output Low Voltage IOL = 1mA IOH Output High Current IOH = 6 x IREF, IREF = 2.32mA CIN Input Pin Capacitance COUT Output Pin Capacitance 6 LPIN Pin Inductance 7 IDD(BYPASS) Power Supply Current (PLL Bypass) IDD Power Supply Current ISS Power Down Current Driven outputs 40 ISS Power Down Current Tristate outputs 12 TA Ambient Temperature 14-0195 Condition VDD 0.4 12.2 15.6 2 VDD = 3.465V, FCPU = 100MHz 5 V A V mA pF nH 90 VDD = 3.465V Bypass mode 100 FCPU = 100MHz PLL mode 130 -40 7 Units 85 mA C www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets AC Switching Characteristics (VDD = 3.35%, VDD_A = 3.35%) Symbol Min Max. Units PLL Mode 95 105 MHz Bypass Mode 100 400 MHz Trise / Tfall Rise and Fall Time (measured between 0.175V to 0.525V) 175 700 ps 2 DTrise / DTfall Rise and Fall Time Variation 125 ps 2 PLL Mode 250 ps 6.5 ns 50 ps 3, 4 1150 mV 2 mV 2 550 mV 2 140 mV 2 FIN Tpd Parameters Non-PLL Mode 2.5 Notes Tjitter Cycle - Cycle Jitter VHIGH Voltage High including overshoot 660 VLOW Voltage Low including undershoot -300 Vcross Absolute crossing point voltages 250 DVcross Total Variation of Vcross over all edges TDC Duty Cycle 45 55 % 3 Tjadd Additive RMS phase jitter for PCIe 2.0 <0 1 ps 5 Notes: 1. Test configuration is Rs = 33.2, Rp = 49.9, and 2pF. 2. Measurement taken from Single Ended waveform. 3. Measurement taken from Differential waveform. 4. Measurement taken using M1 data capture analysis tool. 5. Additive jitter is calculated from input and output RMS phase jitter by using PCIe 2.0 filter. (Tjadd = (output jitter)2 - (input jitter)2 Configuration Test Load Board Termination Rs 33 5% OUT TLA PI6C20400A Rs 33 5% OUT# TLB 475 1% 14-0195 Rp 49.9 1% Rp 49.9 1% 8 2pF 5% 2pF 5% www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Packaging Mechanical: 28-Pin SSOP (H) 1 DATE: 04/10/08 DESCRIPTION: 28-Pin, 209-Mil Wide, SSOP PACKAGE CODE: H28 DOCUMENT CONTROL #: PD-1250 REVISION: F 08-0143 14-0195 9 www.pericom.com03/27/13 PI6C20400A 1:4 Clock Driver for Intel PCIe(R) Chipsets Packaging Mechanical: 28-Pin TSSOP (L) DOCUMENT CONTROL NO. PD - 1313 REVISION: D 28 DATE: 03/09/05 .169 .177 4.3 4.5 .004 .008 1 .378 .386 9.6 9.8 0.45 0.75 0.09 0.20 .018 .030 .252 BSC 6.4 1 .047 1.20 Max SEATING PLANE .007 .012 0.19 0.30 .0256 BSC 0.65 .002 .006 0.05 0.15 Pericom Semiconductor Corporation 3545 N. 1st Street, San Jose, CA 95134 1-800-435-2335 * www.pericom.com Note: 1. Package Outline Exclusive of Mold Flash and Metal Burr 2. Controlling dimentions in millimeters 3. Ref: JEDEC MO-153F/AE DESCRIPTION: 28-Pin, 173-Mil Wide, TSSOP PACKAGE CODE: L Ordering Information(1-3) Ordering Code Package Code Package Description PI6C20400AHE HE 28-pin, 209-mil wide, SSOP, Pb-Free and Green PI6C20400ALE LE 28-pin, 173-mil wide, TSSOP, Pb-Free and Green Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. E = Pb-free and Green 3. Adding an X suffix = Tape/Reel Pericom Semiconductor Corporation * 1-800-435-2336 * www.pericom.com 14-0195 PCIe(R) , and the PCI EXPRESS design mark(R) are trademarks of PCI-SIG(R) (www.pcisig.com) 10 www.pericom.com03/27/13