www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
D-23
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Series 801
D
Series 801 Mighty Mouse Double-Start ACME Thread
Receptacle with PC Tails or Solder Cups
801-011 and 801-033 Ordering Information
Environmental, PCB Receptacle 800-012 connectors feature low prole shells for minimum
protrusion inside enclosures and integral board standos. Contacts are non-removable. Specify
800-011 connectors for applications where open face water immersion is not a requirement.
Water Tight PCB Receptacle 800-033 connectors are identical to 801-011 but are specially
sealed (“MOD-518”) and 100% tested to maintain a helium leak rate of less than 1 x 10-4 cc/
second at one atmosphere pressure dierential. Connectors meet MIL-STD-810 Method 512G
immersion requirements in unmated/open face condition.
How To Order
Sample Part Number 801011 02 M 67 P A
Series
801-011 = Receptacle for Solder Cup or PCB Termination, with Standard Epoxy
801-033 = Receptacle for Solder Cup or PCB Termination, Meets MIL-STD-810
Method 512G for Water Immersion
Shell Style
(See Table I)
-02 = Square Flange, Front or Rear Panel Mount
-12 = Square Flange, Rear Panel Mount with Non-Locking Clinch Nuts
-22 = Square Flange, Rear Panel Mount with Locking Clinch Nuts
-07 = Jam-Nut, Rear Panel Mount
Material and Finish
M = Aluminum / Electroless Nickel RoHS Compliant
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated RoHS Compliant
Shell Size - Insert
Arrangement See Contact Arrangements page D-
Contact Type E = Pin, Solder Cup P = Pin, PC Tail
F = Socket, Solder Cup S = Socket, PC Tail
Polarization (See Table II) A = Normal B = Pos. B C = Pos. C D = Pos. D E = Pos. E F = Pos. F
Table I: Shell Style
Style -, -, -
Square Flange
Style -
Jam-Nut
Rev. 06.19.18
NOTES
1. Contacts are non removable, the
connector is back potted
2. For additional insert arrangements
consult factory
3. Plug mates with all quick coupling
high density receptacle connectors
with same polarization and opposite
contact gender (801-001, 801-002, 801-
007, 801-008)
4. For all insert arrangements with size #8
contacts, dimension changes to .160”
5. For all insert arrangements with size #8
contacts, add .300” to overall length
Rev. 05.23.19
Table II: Keyway Positions
A°
B°
Position A° B°
A° °
B° °
C° °
D° °
E° °
F° °
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
D-24
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Series 801
D
Jam-Nut
801-011-07
Square Flange
801-011-02
Square Flange
801-011-12 and -22
Series 801 Mighty Mouse Double-Start ACME Thread
Receptacle with PC Tails or Solder Cups
801-011 and 801-033 Dimensions
CLINCH NUT
MØ T
B BSC
TYP
V SQ
TYP
ø U
MASTER KEYWAY
4X W
.260 (6.60)
.125 (3.18) MIN
X
.760 (19.30) MAX⁵
S
K THREAD
RED FULL MATE
INDICATOR BAND
SOLDER CUP (REF)
PC TAIL (REF)
4X .025 (.64) HEIGHT
4X .080 (2.03) WIDTH
.095 (2.41) MAX TYP
CLINCH NUT
M
SØ T
.125 (3.18) MIN
4X .025 HEIGHT
4X .080 WIDTH
PC TAIL REF
.260 (6.60) MAX
4x ø J THRU
ø C
A SQ
TYP
13
16
8
12
31
19
4
7
17
B BSC
TYP
.060 (1.5)
.760 (19.3) MAX⁵
RED FULL MATE
INDICATOR BAND
K THD
M
.005
.125 (3.18) MIN
MASTER
KEYWAY
F FLAT
E FLAT
2 PL
ø D
19 17
16 13
12 8
74
31
.060 (1.5)
.925 (23.5) MAX⁵
RED FULL MATE
INDICATOR BAND
K THREAD
L THREAD
ø T ø M
S
.025
PC TAIL
.260 (6.60) MAX⁴
.100 (2.54) MAX
PANEL THICKNESS
Square ange mount receptacle - shell style 02
Square ange mount receptacle - shell style 12 and 22
Jam-nut mount receptacle - shell style 07
PC Tail Dimensions
Contact Size Ø S
# Ø ./.
# Ø ./.
# Ø ./.
# Ø ./.
PC Tail Dimensions
Contact Size Ø S
# Ø ./.
# Ø ./.
# Ø ./.
# Ø ./.
PC Tail Dimensions
Contact Size Ø S
# Ø ./.
# Ø ./.
# Ø ./.
# Ø ./.
Rev. 05.23.19
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
D-25
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Series 801
D
Dimensions
Shell
Size A Sq B Bsc Ø C Ø D E Flat F Flat J Holes K Threead L Thread
. (.) . (.) . (.) . (.) . (.) . (.) .
(.)
.
(.)
.-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UNEF-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.)
.
(.)
.
(.)
.-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
. (.) . (.) . (.) . (.) . (.) . (.) .-.P-.L-A .- UN-A
Dimensions (Continued)
Shell
Size L Thread Ø M Ø T
N Flat
± .
(.)
Ø P
+. (+.)
-. (-.)
Ø R
±. (.) Ø U V Sq
W
Clinch
Nuts
X
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
- .
(.)
.- UNEF-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
- .
(.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
.- UN-A . (.) . (.) . (.) . (.) . (.) . (.) . (.)
Series Recommended Panel Cutouts
801-033 and 801-011
-02 SQUARE FLANGE
-12 & 22 SQUARE FLANGE
4X ø J
Ø R
ø B
BSC
ø P
N FLAT
801-033
-07 JAM NUT
Series 801 Mighty Mouse Double-Start ACME Thread
Receptacle with PC Tails or Solder Cups
801-011 and 801-033 Dimensions
Rev. 05.23.19
Material / nish:
• Shell, jam-nut: aluminum alloy or CRES;
see How to Order Table
• Insulator: high grade rigid dielectric /
N.A.
• Interfacial seal, O-rings: uorosilicone
/ N.A.
• Contact: copper alloy / gold plate per
ASTM B 488, Type II, Code C, Class 1.25,
over a suitable underplate
• Potting compound: epoxy
