FUJITSU MICROELECTRONICS DATA SHEET DS07-12559-2E 8-bit Proprietary Microcontroller CMOS F2MC-8L MB89480 Series MB89485/485L/P485/P485L/PV480 DESCRIPTION The MB89480 series has been developed as a general-purpose version of the F2MC*-8L family consisting of proprietary 8-bit single-chip microcontrollers. In addition to a compact instruction set, the microcontroller contains a variety of peripheral functions such as 21bit timebase timer, watch prescaler, PWC timer, PWM timer, 8/16-bit timer/counter, 6-bit PPG, LCD controller/ driver, external interrupt 1 (edge), external interrupt 2 (level), 10-bit A/D converter, UART/SIO, buzzer, watchdog timer reset. The MB89480 series is designed suitable for LCD remote controller as well as in a wide range of applications for consumer product. *: F2MC is the abbreviation of Fujitsu Flexible Microcontroller. FEATURES * Package used LQFP package and SH-DIP package for MB89P485/P485L, MB89485/485L MDIP package and MQFP package for MB89PV480 * High speed operating capability at low voltage * Minimum execution time: 0.32 s at 12.5 MHz (Continued) For the information for microcontroller supports, see the following web site. http://edevice.fujitsu.com/micom/en-support/ Copyright(c)2003-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved 2008.10 MB89480 Series (Continued) * F2MC-8L family CPU core Instruction set optimized for controllers Multiplication and division instructions 16-bit arithmetic operations Test and branch instructions Bit manipulation instructions, etc. * Six timers PWC timer (also usable as an interval timer) PWM timer 8/16-bit timer/counter x 2 21-bit timebase timer Watch prescaler * Programmable pulse generator 6-bit PPG with program-selectable pulse width and period * External interrupt Edge detection (selectable edge) : 4 channels Low level interrupt (wake-up function) : 8 channels * A/D converter (4 channels) 10-bit successive approximation type * UART/SIO Synchronous/asynchronous data transfer capability * LCD controller/driver Max 31 segments output x 4 commons Booster for LCD driving (selected by mask option) * Buzzer 7 frequencies are selectable by software * Low-power consumption mode Stop mode (oscillation stops so as to minimize the current consumption.) Sleep mode (CPU stops so as to reduce the current consumption to approx. 1/3 of normal.) Watch mode (everything except the watch prescaler stops so as to reduce the power comsumption to an extremely low level.) Sub-clock mode * Watchdog timer reset * I/O ports: Max 42 channels 2 DS07-12559-2E MB89480 Series PRODUCT LINEUP Part number Parameter MB89485L MB89485 MB89P485L MB89P485 MB89PV480 Classification Mass production products (mask ROM product) OTP Piggy-back ROM size 16K x 8-bit (internal ROM) 16K x 8-bit (internal PROM with read protection) *2 32K x 8-bit (external ROM)*1 RAM size 1K x 8-bit 512 x 8-bit CPU functions Number of instructions Instruction bit length Instruction length Data bit length Minimum execution time Minimum interrupt processing time : 136 : 8 bits : 1 to 3 bytes : 1, 8, 16 bits : 0.32 s at 12.5 MHz : 2.88 s at 12.5 MHz Ports I/O ports (CMOS) N-channel open drain I/O ports Output ports (N-channel open drain) Input port Total : 11 pins : 28 pins : 2 pins : 1 pin : 42 pins 21-bit timebase timer Interrupt period (0.66 ms, 2.6 ms, 21.0 ms, 335.5 ms) at 12.5 MHz. Watchdog timer Reset period (167.8 ms to 335.5 ms) at 12.5 MHz. Pulse width count timer 1 channel. 8-bit one-shot timer operation (supports underflow output, operating clock period: 1, 4, 32 tinst, external). 8-bit reload timer operation (supports square wave output, operating clock period: 1, 4, 32 tinst, external). 8-bit pulse width measurement operation (supports continuous measurement, H width, L width, rising edge to rising edge, falling edge to falling edge measurement and both edge measurement). PWM timer 8-bit reload timer operation (supports square wave output, operating clock period: 1, 4, 32 tinst, external). 8-bit resolution PWM operation. 6- bit programmable pulse generator Can generate square pulse with programmable period. Can be operated either as a 2-channel 8-bit timer/counter (timer 11 and timer 12, each with its 8/16-bit timer/counter own independent operating clock cycle), or as one 16-bit timer/counter. 11, 12 In timer 11 or 16-bit timer/counter operation, event counter operation (external clock-triggered) and square wave output capability. Can be operated either as a 2-channel 8-bit timer/counter (timer 21 and timer 22, each with its 8/16-bit timer/counter own independent operating clock cycle), or as one 16-bit timer/counter. 21, 22 In timer 21 or 16-bit timer/counter operation, event counter operation (external clock-triggered) and square wave output capability. External interrupt 4 independent channels (selectable edge, interrupt vector, request flag). 8 channels (low level interrupt). (Continued) DS07-12559-2E 3 MB89480 Series (Continued) Part number Parameter MB89485L MB89485 MB89P485L MB89P485 MB89PV480 10-bit resolution x 4 channels. A/D conversion function (conversion time: 60 tinst ). Supports repeated activation by internal clock. A/D converter Common output Segment output LCD controller/driver Bias power supply pins LCD display RAM size Dividing resistor/booster : 4 (Max) : 31 (Max) (selected resistor ladder) : 26 (Max) (selected booster) :4 : 31 x 4 bits : selected by mask option UART/SIO Synchronous/asynchronous data transfer capability. (Max baud rate: 97.656 Kbps at 12.5 MHz). (7 and 8 bits with parity bit; 8 and 9 bits without parity bit). Buzzer output 7 frequencies are selectable by software. Standby mode Sleep mode, stop mode, watch mode, sub-clock mode. Process CMOS Operating voltage 2.2 V to 3.6 V 2.2 V to 5.5 V 2.7 V to 3.6 V 3.5 V to 5.5 V 2.7 V to 5.5 V *1 : Use MBM27C256A as the external ROM. *2 : Read protection feature is selected by part number, detail please refer to MASK OPTIONS. Note : 1 tinst = one instruction cycle (execution time) which can be selected as 1/4, 1/8, 1/16, or 1/64 of main clock. PACKAGE AND CORRESPONDING PRODUCTS Part number MB89485/485L MB89P485/P485L MB89PV480 DIP-64P-M01 O O X FPT-64P-M23 O O X MDP-64C-P02 X X O MQP-64C-P01 X X O Package O : Availabe X : Not available 4 DS07-12559-2E MB89480 Series DIFFERENCES AMONG PRODUCTS 1. Memory Size Before evaluating using the piggyback product, verify its differences from the product that will actually be used. Take particular care on the following point: * The stack area is set at the upper limit of the RAM. 2. Current Consumption * For the MB89PV480, the current consumed by the EPROM mounted in the piggy-back socket is needed to be included. * When operating at low speed, the current consumed by the one-time PROM product is greater than that for the mask ROM product. However, the current consumption is roughly the same in sleep and stop mode. * For more information, see " ELECTRICAL CHARACTERISTICS". 3. Oscillation Stabilization Time after Power-on Reset * * * * For MB89PV480, MB89P485L and MB89485L, there is no power-on stabilization time after power-on reset. For MB89P485, there is power-on stabilization time after power-on reset. For MB89485, the power-on stabilization time can be selected. For more information, please refer to " MASK OPTION". DS07-12559-2E 5 MB89480 Series PIN ASSIGNMENT (TOP VIEW) COM0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 P40/SEG8 P41/SEG9 P42/SEG10 P43/SEG11 P44/SEG12 P45/SEG13 P46/SEG14 P47/SEG15 P50/SEG16 P51/SEG17 P52/SEG18 P53/SEG19 P54/SEG20 P55/SEG21 P56/SEG22 P57 P10/SEG23/INT10 P11/SEG24/INT11 P12/SEG25/INT12 P13/SEG26/INT13 X0A X1A C *2 VSS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 *3 A15 A12 A7 A6 A5 A4 A3 A2 A1 A0 O1 O2 O3 VSS 65 66 67 68 69 70 71 72 73 74 75 76 77 78 92 91 90 89 88 87 86 85 84 83 82 81 80 79 VCC A14 A13 A8 A9 A11 OE A10 CE O8 O7 O6 O5 O4 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 Vcc COM1 P30/COM2 P31/COM3 V3 P27/V2/EC1 P26/V1/TO1 V0/SEG0 P25/C0/EC2 *1 P24/C1/TO2 *1 P23/SI P22/SO P21/SCK P20/PWM P00/INT20 P01/INT21 P02/INT22 P03/INT23 *1 P04/INT24 *1 P05/INT25/PWC P06/INT26/PPG P07/INT27/BUZ AVss AVcc P17/SEG30/AN3 *1 P16/SEG29/AN2 *1 P15/SEG28/AN1 *1 P14/SEG27/AN0 *1 RST MODE X1 X0 (DIP-64P-M01) (MDP-64C-P02) *1: If booster is selected, EC2 and TO2 will be redirected to P03/INT23 and P04/INT24 respectively. Segment output of P17/SEG30/AN3 - P14/SEG27/AN0 will be disabled. *2: For product other than MB89P485, pin 31 is NC pin. *3: Pin assignment on package top. Pin no. Pin symbol Pin no. Pin symbol Pin no. Pin symbol Pin no. Pin symbol 65 A15 73 A1 81 O6 89 A8 66 A12 74 A0 82 O7 90 A13 67 A7 75 O1 83 O8 91 A14 68 A6 76 O2 84 CE 92 Vcc 69 A5 77 O3 85 A10 70 A4 78 VSS 86 OE 71 A3 79 O4 87 A11 72 A2 80 O5 88 A9 N.C.: As connected internally, do not use. (Continued) 6 DS07-12559-2E MB89480 Series 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 COM0 Vcc COM1 P30/COM2 P31/COM3 V3 P27/V2/EC1 P26/V1/TO1 V0/SEG0 (TOP VIEW) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 P25/C0/EC2 *1 P24/C1/TO2 *1 P23/SI P22/SO P21/SCK P20/PWM P00/INT20 P01/INT21 P02/INT22 P03/INT23 *1 P04/INT24 *1 P05/INT25/PWC P06/INT26/PPG P07/INT27/BUZ AVss AVcc P10/SEG23/INT10 P11/SEG24/INT11 P12/SEG25/INT12 P13/SEG26/INT13 X0A X1A *2 C Vss X0 X1 MODE RST *1 P14/SEG27/AN0 1 P15/SEG28/AN1 * *1 P16/SEG29/AN2 *1 P17/SEG30/AN3 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 P40/SEG8 P41/SEG9 P42/SEG10 P43/SEG11 P44/SEG12 P45/SEG13 P46/SEG14 P47/SEG15 P50/SEG16 P51/SEG17 P52/SEG18 P53/SEG19 P54/SEG20 P55/SEG21 P56/SEG22 P57 (FPT-64P-M23) *1: If booster is selected, EC2 and TO2 will be redirected to P03/INT23 and P04/INT24 respectively. Segment output of P17/SEG30/AN3 - P14/SEG27/AN0 will be disabled. *2: For product other than MB89P485, pin 23 is NC pin. (Continued) DS07-12559-2E 7 MB89480 Series SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 COM0 Vcc COM1 P30/COM2 P31/COM3 V3 P27/V2/EC1 (Continued) 64 63 62 61 60 59 58 57 56 55 54 53 52 (TOP VIEW) 77 76 75 74 73 72 71 70 69 85 86 87 88 89 90 91 92 93 P26/V1/TO1 V0/SEG0 P25/C0/EC2 *1 P24/C1/TO2 *1 P23/SI P22/SO P21/SCK P20/PWM P00/INT20 P01/INT21 P02/INT22 P03/INT23 *1 P04/INT24 *1 P05/INT25/PWC P06/INT26/PPG P07/INT27/BUZ AVss AVcc P17/SEG30/AN3 *1 P12/SEG25/INT12 P13/SEG26/INT13 X0A X1A *2 C Vss X0 X1 MODE RST *1 P14/SEG27/AN0 *1 P15/SEG28/AN1 *1 P16/SEG29/AN2 20 21 22 23 24 25 26 27 28 29 30 31 32 P44/SEG12 P45/SEG13 P46/SEG14 P47/SEG15 P50/SEG16 P51/SEG17 P52/SEG18 P53/SEG19 P54/SEG20 P55/SEG21 P56/SEG22 P57 P10/SEG23/INT10 P11/SEG24/INT11 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 84 83 82 81 80 79 78 P41/SEG9 P42/SEG10 P43/SEG11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 94 95 96 65 66 67 68 SEG7 P40/SEG8 (MQP-64C-P01) *1: If booster is selected, EC2 and TO2 will be redirected to P03/INT23 and P04/INT24 respectively. Segment output of P17/SEG30/AN3 - P14/SEG27/AN0 will be disabled. *2: Pin 24 is NC pin. Pin assignment on package top Pin Pin Pin no. symbol symbol Pin no. Pin symbol N.C. 89 OE 82 O4 90 N.C. A0 83 O5 91 A11 76 N.C. 84 O6 92 A9 A6 77 O1 85 O7 93 A8 70 A5 78 O2 86 O8 94 A13 71 A4 79 O3 87 CE 95 A14 72 A3 80 VSS 88 A10 96 VCC Pin no. Pin symbol Pin no. 65 N.C. 73 A2 81 66 VPP 74 A1 67 A12 75 68 A7 69 N.C.: As connected internally, do not use. 8 DS07-12559-2E MB89480 Series PIN DESCRIPTION Pin number SH-DIP*1 MQFP*2 MDIP*4 33 26 QFP*3 25 Pin name X0 Connection pins for a crystal or other oscillator. An external clock can be connected to X0. In this case, leave X1 open. A Connection pins for a crystal or other oscillator. An external clock can be connected to X0A. In this case, leave X1A open. B Input pin for setting the memory access mode. Connect directly to VSS. RST C Reset I/O pin. The pin is an N-ch open-drain type with pullup resistor and a hysteresis input. The pin outputs an "L" level when an internal reset request is present. Inputting an "L" level initializes internal circuits. P00/INT20 to P02/INT22 D General-purpose CMOS I/O port. A hysteresis input. The pin is shared with external interrupt 2 input. D General-purpose CMOS I/O port. A hysteresis input. The pin is shared with external interrupt 2 input, and shared with 8/16-bit timer/counter 21, 22 input when booster is selected. D General-purpose CMOS I/O port. A hysteresis input. The pin is shared with external interrupt 2 input, and shared with 8/16-bit timer/counter 21, 22 output when booster is selected. D General-purpose CMOS I/O port. A hysteresis input. The pin is shared with external interrupt 2 input, and PWC input. D General-purpose CMOS I/O port. A hysteresis input. The pin is shared with external interrupt 2 input, and 6-bit PPG output. D General-purpose CMOS I/O port. A hysteresis input. The pin is shared with external interrupt 2 input and buzzer output. F/K General-purpose N-ch open-drain I/O port. A hysteresis input. The pin is shared with external interrupt 1 input and LCD segment output. 27 26 X1 29 22 21 X0A 30 23 22 X1A 35 28 27 MODE 29 28 50 to 48 43 to 41 42 to 40 47 46 45 44 43 40 39 38 37 36 39 Function A 34 36 I/O circuit type P03/INT23 38 P04/INT24 37 P05/INT25/ PWC 36 P06/INT26/ PPG 35 P07/INT27/ BUZ P10/SEG23/ 25 to 28 18 to 21 17 to 20 INT10 to P13/ SEG26/INT13 (Continued) DS07-12559-2E 9 MB89480 Series Pin number SH-DIP*1 MQFP*2 MDIP*4 QFP*3 37 to 40 30 to 33 29 to 32 Pin name I/O circuit type P14/SEG27/ AN0 to P17/ SEG30/AN3 G/K Function General-purpose N-ch open-drain I/O port. An analog input. The pin is shared with A/D converter input and LCD segment output. LCD segment output will be disabled when booster is selected. 51 44 43 P20/PWM E General-purpose CMOS I/O port. The pin is shared with PWM output. 52 45 44 P21/SCK E General-purpose CMOS I/O port. The pin is shared with UART/SIO clock I/O. 53 46 45 P22/SO E General-purpose CMOS I/O port. The pin is shared with UART/SIO data output. 54 47 46 P23/SI D General-purpose CMOS I/O port. The pin is shared with UART/SIO data input. H General-purpose CMOS I/O port. The pin is shared with 8/16-bit timer 21, 22 output (it is redirected to P04/INT24 when booster is selected), and as a capacitor connecting pin when booster is selected. 55 48 47 P24/C1/TO2 56 49 48 P25/C0/EC2 F General-purpose CMOS I/O port. A hysteresis input. The pin is shared with 8/16-bit timer 21, 22 input (it is redirected to P03/INT23 when booster is selected), and as a capacitor connecting pin when booster is selected. 58 51 50 P26/V1/TO1 H General-purpose CMOS I/O port. The pin is shared with 8/16-bit timer 11, 12 output, and LCD power driving pin. General-purpose CMOS I/O port. A hysteresis input. The pin is shared with 8/16-bit timer 11, 12 input, and LCD power driving pin. 59 52 51 P27/V2/EC1 F 62 55 54 P30/COM2 I/K General-purpose N-ch open-drain output port. The pin is shared with the LCD common output. 61 54 53 P31/COM3 I/K General-purpose N-ch open-drain output port. The pin is shared with the LCD common output. 9 to 16 2 to 9 1 to 8 P40/SEG8 to P47/SEG15 H/K General-purpose N-ch open-drain I/O port. The pin is shared with LCD segment output. 17 to 23 10 to 16 9 to 15 P50/SEG16 to P56/SEG22 H/K General-purpose N-ch open-drain I/O port. The pin is shared with LCD segment output. P57 J 24 17 16 General-purpose CMOS input port. (Continued) 10 DS07-12559-2E MB89480 Series (Continued) Pin number SH-DIP*1 MQFP*2 MDIP*4 QFP*3 Pin name I/O circuit type Function 2 to 8 59 to 64, 1 58 to 64 SEG1 to SEG7 K LCD segment output-only pins. 1, 63 58, 56 57, 55 COM0 to COM1 K LCD common output-only pins. 60 53 52 V3 -- LCD driving power supply pin. 57 50 49 V0/SEG0 --/K LCD driving power supply pin when booster is selected. LCD segment output when booster is not selected. When MB89P485 is used, connect an external 0.1 F capacitor between this pin and the ground. 31 24 23 C -- 64 57 56 VCC -- Power supply pin (+3 V or +5 V). 32 25 24 VSS -- Power supply pin (GND). 41 34 33 AVCC -- A/D converter power supply pin. 42 35 34 AVSS -- A/D converter power supply pin. Use at the same voltage level as VSS. N.C. pin when MB89485/485L, MB89P485L or MB89PV480 is used. *1: DIP-64P-M01 *2: MQP-64C-P01 *3: FPT-64P-M23 *4: MDP-64C-P02 DS07-12559-2E 11 MB89480 Series External EPROM Socket (MB89PV480 only) Pin number MDIP*1 MQFP*2 Pin name I/O 91 90 66 87 85 88 89 67 68 69 70 71 72 73 74 95 94 67 91 88 92 93 68 69 70 71 72 73 74 75 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 O Address output pins. 83 82 81 80 79 77 76 75 86 85 84 83 82 79 78 77 O8 O7 O6 O5 O4 O3 O2 O1 I Data input pins. 65 76 81 90 65 76 81 90 N.C. -- Internally connected pins. Always leave open. 65 66 VPP O "H" level output pin. 78 80 VSS O Power supply pin (GND). 84 87 CE O Chip enable pin for the EPROM. Outputs "H" in standby mode. 86 89 OE O Output enable pin for the EPROM. Always outputs "L". 92 96 VCC O Power supply pin for the EPROM. Function *1: MDP-64C-P02 *2: MQP-64C-P01 12 DS07-12559-2E MB89480 Series I/O CIRCUIT TYPE Type Circuit Remarks * Main/Sub-clock circuit * Oscillation feedback resistance is approx. 500 k for main clock circuit and 5 M for sub-clock circuit. X1 (X1A) N-ch P-ch P-ch X0 (X0A) A N-ch N-ch Stop mode control signal B * Hysteresis input * The pull-down resistor (not available in MB89P485/P485L) Approx. 50 k R * The pull-up resistor (P-channel) Approx. 50 k * Hysteresis input R P-ch C N-ch pull-up resistor register R P-ch P-ch D * * * * CMOS output CMOS input Hysteresis input Selectable pull-up resistor Approx. 50 k N-ch port resource pull-up resistor register R P-ch P-ch * CMOS output * CMOS input * Selectable pull-up resistor Approx. 50 k E N-ch port (Continued) DS07-12559-2E 13 MB89480 Series (Continued) Type Circuit Remarks * N-ch open-drain output * CMOS input * Hysteresis input F N-ch port resources * N-ch open-drain output * CMOS input * Analog input G N-ch port analog input * N-ch open-drain output * CMOS input H N-ch port * N-ch open-drain output I N-ch * CMOS input J port * LCD segment output P-ch N-ch K P-ch N-ch 14 DS07-12559-2E MB89480 Series HANDLING DEVICES 1. Preventing Latch-up Latch-up may occur on CMOS IC if voltage higher than VCC or lower than VSS is applied to input and output pins other than medium- to high-voltage pins or if higher than the voltage which shows on "1. Absolute Maximum Ratings" in ELECTRICAL CHARACTERISTICS is applied between VCC and VSS. When latch-up occurs, power supply current increases rapidly and might thermally damage elements. When using, take great care not to exceed the absolute maximum ratings. Also, take care to prevent the analog power supply (AVCC) and analog input from exceeding the digital power supply (VCC) when the analog system power supply is turned on and off. 2. Treatment of Unused Input Pins Leaving unused input pins open could cause malfunctions. They should be connected to a pull-up or pull-down resistor. 3. Treatment of Power Supply Pins on Microcontrollers with A/DConverter Connect to be AVCC = VCC and AVSS = VSS even if the A/D converter is not in use. 4. Treatment of N.C. Pins Be sure to leave (internally connected) N.C. pins open. 5. Power Supply Voltage Fluctuations Although VCC power supply voltage is assured to operate within the rated range, a rapid fluctuation of the voltage could cause malfunctions, even if it occurs within the rated range. Stabilizing voltage supplied to the IC is therefore important. As stabilization guidelines, it is recommended to control power so that VCC ripple fluctuations (P-P value) will be less than 10% of the standard VCC value at the commercial frequency (50 to 60 Hz) and the transient fluctuation rate will be less than 0.1 V/ms at the time of a momentary fluctuation such as when power is switched. 6. Precautions when Using an External Clock Even when an external clock is used, oscillation stabilization time is required for power-on reset and wake-up from stop mode. 7. Notes on noise in the External Reset Pin (RST) If the reset pulse applied to the external reset pin (RST) does not meet the specifications, it may cause malfunctions. Use caution so that the reset pulse less than the specifications will not be fed to the external reset pin (RST). DS07-12559-2E 15 MB89480 Series PROGRAMMING OTPROM IN MB89P485/P485L WITH SERIAL PROGRAMMER 1. Programming the OTPROM with Serial Programmer * All OTP products can be programmed with serial programmer. 2. Programming the OTPROM * To program the OTPROM using FUJITSU MCU programmer MB91919-001. Inquiry : Fujitsu Microelectronics Asia Pte Ltd. :TEL (65)-2810770 FAX (65)-2810220 3. Programming Adapter for OTPROM * To program the OTPROM using FUJITSU MCU programmer MB91919-001, use the programming adapter listed below. Package Compatible socket adapter DIP-64P-M01 MB91919-812 FPT-64P-M23 MB91919-813 Inquiry : Fujitsu Microelectronics Asia Pte Ltd. : TEL (65)-2810770 FAX (65)-2810220 4. OTPROM Content Protection For product with OTPROM content protection feature (MB89P485/P485L-103, MB89P485/P485L-104), OTPROM content can be read using serial programmer if the OTPROM content protection mechanism is not activated. One predefined area of the OTPROM (FFFCH) is assigned to be used for preventing the read access of OTPROM content. If the protection code "00H" is written in this address (FFFCH), the OTPROM content cannot be read by any serial programmer. Note: The program written into the OTPROM cannot be verified once the OTPROM protection code is written ("00H" in FFFCH). It is advised to write the OTPROM protection code at last. 5. Programming Yield All bits cannot be programmed at Fujitsu shipping test to a blanked OTPROM microcomputer, due to its nature. For this reason, a programming yield of 100% cannot be assured at all times. 16 DS07-12559-2E MB89480 Series PROGRAMMING OTPROM IN MB89P485/P485L WITH PARALLEL PROGRAMMER 1. Programming OTPROM with Parallel Programmer * Only products without protection feature (i.e. MB89P485/P485L-101 and MB89P485/P485L-102) can be programmed with parallel programmer. Product with protection feature (i.e. MB89P485/P485L-103 and MB89P485/P485L-104) cannot be programmed with parallel programmer. 2. ROM Writer Adapters and Recommended ROM Writers * The following shows ROM writer adapters and recommended ROM writers. Ando Electric Co., Ltd. (Parallel programmer) Fujitsu Microelectronics Asia Pte Ltd. (Serial programmer) Package name Applicable adapter model DIP-64P-M01 MB91919-604 FPT-64P-M23 MB91919-605 Recommended writer MB91919-001 Inquiries : Fujitsu Microelectronics Asia Pte Ltd. : TEL (65)-2810770 Writing Data to the OTPROM using Writer from Minato Electronics Co., Ltd. (1) Set the OTPROM writer for the CU50-OTP (device code: cdB6DC). (2) Load the program data to the OTPROM writer. (3) Write data using the OTPROM writer. 3. Programming Yield All bits cannot be programmed at Fujitsu shipping test to a blanked OTPROM microcomputer, due to its nature. For this reason, a programming yield of 100% cannot be assured at all times. DS07-12559-2E 17 MB89480 Series PROGRAMMING TO THE EPROM WITH PIGGYBACK/EVALUATION DEVICE 1. EPROM for Use MBM27C256A-20TVM 2. Memory Space Memory space in each mode is shown in the diagram below. Address Normal operating mode Corresponding addresses on the EPROM programmer 0000H I/O 0080H RAM 0480H 8000H Not available 0000H PROM 32KB FFFFH EPROM 32KB 7FFFH 3. Programming to the EPROM (1) Set the EPROM programmer to the MBM27C256. (2) Load program data into the EPROM programmer at 0000H to 7FFFH. (3) Program to 0000H to 7FFFH with the EPROM programmer. 18 DS07-12559-2E MB89480 Series BLOCK DIAGRAM CMOS I/O port Main clock oscillator X0 X1 Buzzer output P07/INT27/BUZ Clock controller 6-bit PPG Sub-clock oscillator 8-bit PWC timer Reset circuit (Watchdog timer) RST P06/INT26/PPG External interrupt 2 (level) Port 0 X0A X1A P05/INT25/PWC P04/INT24 *1 8 P03/INT23 *1 21-bit timebase timer P02/INT22 to P00/INT20 AVcc AVss 8-bit PWM timer P20/PWM P24/C1/TO2 *1 P25/C0/EC2 *1 P26/V1/TO1 P27/V2/EC1 UART/SIO Port 2 *4 P21/SCK P22/SO P23/SI 8/16-bit timer/counter 21,22 10-bit A/D converter N-ch open-drain I/O port External interrupt 1 (edge) 8/16-bit timer/counter 11,12 2 4 4 Port 1 CMOS I/O port *4 Internal data bus Watch prescaler 4 4 P14/SEG27/AN0 to P17/SEG30/AN3 *1 *1 P10/SEG23/INT10 to P13/SEG26/INT13 8 Booster 7 SEG1 to SEG7 2 2 P31/COM3 2 LCD controller/driver V3 V0/SEG0 *3 N-ch open-drain output port RAM F2MC-8L CPU ROM 32 x 4-bit display RAM (16 bytes) 16 Port 4 and Port 5 *4 P30/COM2 Port 3 COM0 , COM1 N-ch open-drain I/O port P57 3 P56/SEG22 to P54/SEG20 4 P53/SEG19 to P50/SEG16 4 P47/SEG15 to P44/SEG12 4 P43/SEG11 to P40/SEG8 Other pins Vcc, Vss, MODE, C *2 *1: If booster is selected, EC2 and TO2 will be redirected to P03/INT23 and P04/INT24 respectively. Segment output of P14/SEG27/AN0 to P17/SEG30/AN3 will be disabled. *2: For product other than MB89P485, C pin is NC pin. *3: If booster is selected, it serves as V0. If booster is not selected, it serves as SEG0. *4: P20 to P23 are CMOS I/O ports. P24 to P27 are N-ch open-drain I/O ports. P57 is input-only port. DS07-12559-2E 19 MB89480 Series CPU CORE 1. Memory Space The microcontrollers of the MB89480 series offer a memory space of 64 Kbytes for storing all of I/O, data, and program areas. The I/O area is located the lowest address. The data area is provided immediately above the I/O area. The data area can be divided into register, stack, and direct areas according to the application. The program area is located at exactly the opposite end, that is, near the highest address. Provide the tables of interrupt reset vectors and vector call instructions toward the highest address within the program area. The memory space of the MB89480 series is structured as illustrated below. Memory Space MB89485/485L 0000H MB89P485/P485L 0080H RAM 0080H 0280H RAM RAM 0100H 0100H Generalpurpose registers I/O I/O 0080H 0100H 0200H 0000H 0000H I/O MB89PV480 0200H Generalpurpose registers 0200H Generalpurpose registers 0280H 0480H Vacant Vacant Vacant 8000H C000H FFC0H FFFFH C000H ROM FFC0H FFFFH ROM FFC0H FFFFH External ROM (32KB) Vector table (reset, interrupt, vector call instruction) 20 DS07-12559-2E MB89480 Series 2. Registers The F2MC-8L family has two types of registers; dedicated registers in the CPU and general-purpose registers in the memory. The following registers are provided: Program counter (PC) : A 16-bit register for indicating instruction storage positions. Accumulator (A) : A 16-bit temporary register for storing arithmetic operations, etc. When the instruction is an 8-bit data processing instruction, the lower byte is used. Temporary accumulator (T) : A 16-bit register for performing arithmetic operations with the accumulator. When the instruction is an 8-bit data processing instruction, the lower byte is used. Index register (IX) : A 16-bit register for index modification. Extra pointer (EP) : A 16-bit pointer for indicating a memory address. Stack pointer (SP) : A 16-bit register for indicating a stack area. Program status (PS) : A 16-bit register for storing a register pointer, a condition code. Initial value 16 bits PC FFFDH : Program counter A : Accumulator Undefined T : Temporary accumulator Undefined IX : Index register Undefined EP : Extra pointer Undefined SP : Stack pointer Undefined PS : Program status I-flag = 0, IL1, 0 = 11 Other bits are undefined. The PS can further be divided into higher 8 bits for use as a register bank pointer (RP) and the lower 8 bits for use as a condition code register (CCR). (See the diagram below.) Structure of the Program Status Register 15 PS 14 13 12 RP 10 9 8 Vacancy Vacancy Vacancy RP DS07-12559-2E 11 7 6 H I 5 4 IL1, 0 3 2 1 0 N Z V C CCR 21 MB89480 Series The RP indicates the address of the register bank currently in use. The relationship between the pointer contents and the actual address is based on the conversion rule illustrated below. Rule for Conversion of Actual Addresses of the General-purpose Register Area RP Lower OP codes "0" "0" "0" "0" "0" "0" "0" "1" R4 R3 R2 R1 R0 b2 b1 b0 Generated addresses A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 The CCR consists of bits indicating the results of arithmetic operations and the contents of transfer data and bits for control of CPU operations at the time of an interrupt. 22 H-flag : Set to "1" when a carry or a borrow from bit 3 to bit 4 occurs as a result of an arithmetic operation. Clear to "0" otherwise. This flag is for decimal adjustment instructions. I-flag : Interrupt is allowed when this flag is set to "1". Interrupt is prohibited when the flag is set to "0". Clear to "0" when reset. IL1, 0 : Indicates the level of the interrupt currently allowed. Processes an interrupt only if its request level is higher than the value indicated by this bit. IL1 IL0 Interrupt level 0 0 0 1 1 0 2 1 1 3 Priority High 1 Low = no interrupt N-flag : Set to "1" if the MSB is set to "1" as the result of an arithmetic operation. Clear to "0" otherwise. Z-flag : Set to "1" when an arithmetic operation results in "0". Clear to "0" otherwise. V-flag : Set to "1" if a signed numeric value overflows because of an arithmetic calculation. Clear to "0" if the overflow does not occur. C-flag : Set to "1" when a carry or a borrow from bit 7 occurs as a result of an arithmetic operation. Clear to "0" otherwise. Set to the shift-out value in the case of a shift instruction. DS07-12559-2E MB89480 Series The following general-purpose registers are provided: General-purpose registers: An 8-bit register for storing data The general-purpose registers are 8 bits and located in the register banks of the memory. One bank contains eight registers. Up to a total of 32 banks can be used on the MB89480 series. The bank currently in use is indicated by the register bank pointer (RP). Register Bank Configuration This address = 0100H + 8 x (RP) R0 R1 R2 R3 R4 R5 R6 R7 32 banks Memory area DS07-12559-2E 23 MB89480 Series I/O MAP Address Register name Register description 00H PDR0 Port 0 data register 01H DDR0 Port 0 data direction register 02H PDR1 Port 1 data register 03H DDR1 Port 1 data direction register 04H PDR2 Port 2 data register 05H Read/Write Initial value R/W XXXXXXXXB W* 00000000B R/W XXXXXXXXB W* 00000000B R/W 00000000B (Reserved) 06H DDR2 Port 2 data direction register R/W 00000000B 07H SYCC System clock control register R/W X-1MM100B 08H STBC Standby control register R/W 00010XXXB 09H WDTC Watchdog timer control register W* 0---XXXXB 0AH TBTC Timebase timer control register R/W 00---000B 0BH WPCR Watch prescaler control register R/W 00--0000B 0CH PDR3 Port 3 data register R/W ------11B R XXXX----B R/W 11111111B R/W X1111111B 0DH 0EH (Reserved) RSFR Reset flag register 0FH 10H (Reserved) PDR4 Port 4 data register 11H 12H (Reserved) PDR5 Port 5 data register 13H to 1FH (Reserved) 20H SMC1 UART/SIO mode control register 1 R/W 00000000B 21H SMC2 UART/SIO mode control register 2 R/W 00000000B 22H SRC UART/SIO rate control register R/W XXXXXXXXB 23H SSD UART/SIO status/data register R 00001---B 24H SIDR/SODR UART/SIO data register R/W XXXXXXXXB 25H EIC1 External interrupt 1 control register 1 R/W 00000000B 26H EIC2 External interrupt 1 control register 2 R/W 00000000B 27H EIE2 External interrupt 2 enable register R/W 00000000B 28H EIF2 External interrupt 2 flag register R/W -------0B 29H to 2BH (Reserved) 2CH ADC1 A/D control register 1 R/W -0000000B 2DH ADC2 A/D control register 2 R/W -0000001B 2EH ADDH A/D data register (Upper byte) R ------XXB 2FH ADDL A/D data register (Lower byte) R XXXXXXXXB 30H ADEN A/D input enable register R/W 1111----B 31H PCR1 PWC control register 1 R/W 0-0--000B 32H PCR2 PWC control register 2 R/W 00000000B 33H PLBR PWC reload buffer register R/W XXXXXXXXB (Continued) 24 DS07-12559-2E MB89480 Series (Continued) Address Register name Register description Read/Write Initial value R/W 0-000000B W* XXXXXXXXB 34H CNTR PWM timer control register 35H COMR PWM timer compare register 36H T22CR Timer 22 control register R/W 000000X0B 37H T21CR Timer 21 control register R/W 000000X0B 38H T22DR Timer 22 data register R/W XXXXXXXXB 39H T21DR Timer 21 data register R/W XXXXXXXXB 3AH T12CR Timer 12 control register R/W 000000X0B 3BH T11CR Timer 11 control register R/W 000000X0B 3CH T12DR Timer 12 data register R/W XXXXXXXXB 3DH T11DR Timer 11 data register R/W XXXXXXXXB 3EH PPGC1 PPG control register 1 R/W 00000000B 3FH PPGC2 PPG control register 2 R/W 0-000000B 40H BUZR Buzzer control register R/W -----000B 41H to 5DH (Reserved) 5EH LCR1 LCD controller control register 1 R/W 00010000B 5FH LCR2 LCD controller control register 2 R/W -0000000B 60H to 6FH VRAM LCD data RAM R/W XXXXXXXXB 70H PURC0 Port 0 pull up resistor control register R/W 11111111B R/W ----1111B 71H (Reserved) 72H PURC2 Port 2 pull up resistor control register 73H to 7AH (Reserved) 7BH ILR1 Interrupt level setting register 1 W* 11111111B 7CH ILR2 Interrupt level setting register 2 W* 11111111B 7DH ILR3 Interrupt level setting register 3 W* 11111111B 7EH ILR4 Interrupt level setting register 4 W* 11111111B 7FH (Reserved) * : Bit manipulation instruction cannot be used. * Read/write access symbols R/W : Readable and writable R : Read-only W : Write-only * Initial value symbols 0 1 X M : The initial value of this bit is "0". : The initial value of this bit is "1". : The initial value of this bit is undefined. : Unused bit. : The initial value of this bit is determined by mask option. DS07-12559-2E 25 MB89480 Series ELECTRICAL CHARACTERISTICS 1. Absolute Maximum Ratings (AVSS = VSS = 0.0 V) Parameter Symbol Value Unit Remarks Min Max VCC AVCC VSS - 0.3 VSS + 6.0 V MB89PV480, MB89P485, MB89485 AVCC must not exceed VCC VCC AVCC VSS - 0.3 VSS + 4.0 V MB89P485L, MB89485L AVCC must not exceed VCC V0 to V3 VSS - 0.3 VSS + 6.0 V Input voltage VI VSS - 0.3 VCC + 0.3 V P00 to P07, P10 to P17, P20 to P27, P40 to P47, P50 to P57 Output voltage VO VSS - 0.3 VCC + 0.3 V P00 to P07, P10 to P17, P20 to P27, P30 to P31, P40 to P47, P50 to P56 ICLAMP - 2.0 + 2.0 mA * |ICLAMP| 20 mA * IOL 15 mA "L" level average output current IOLAV 4 mA "L" level total maximum output current IOL 100 mA IOLAV 40 mA IOH -15 mA "H" level average output current IOHAV -4 mA "H" level total maximum output current IOH -50 mA IOHAV -20 mA Power consumption PD 300 mW Operating temperature TA -40 +85 C Tstg -55 +150 C Power supply voltage LCD power supply voltage Maximum clamp current Total maximum clamp current "L" level maximum output current "L" level total average output current "H" level maximum output current "H" level total average output current Storage temperature Average value (operating current x operating rate) Average value (operating current x operating rate) Average value (operating current x operating rate) Average value (operating current x operating rate) Precautions: Permanent device damage may occur if the above "Absolute Maximum Ratings" are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. * : * Applicable to pins: P00 to P07, P20 to P23, AN0 to AN3 * Use within recommended operating conditions. * Use at DC voltage (current). * The +B signal should always be applied with a limiting resistance placed between the +B signal and the microcontroller. * The value of the limiting resistance should be set so that when the +B signal is applied the input current to the microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods. 26 DS07-12559-2E MB89480 Series * Note that when the microcontroller drive current is low, such as in the power saving modes, the +B input potential may pass through the protective diode and increase the potential at the Vcc pin, and this may affect other devices. * Note that if a +B signal is input when the microcontroller current is off (not fixed at 0 V), the power supply is provided from the pins, so that incomplete operation may result. * Note that if the +B input is applied during power-on, the power supply is provided from the pins and the resulting supply voltage may not be sufficient to operate the power-on result. * Care must be taken not to leave the +B input pin open. * Note that analog system input/output pins other than the A/D input pins (LCD drive pins, comparator input pins, etc.) cannnot accept +B signal input. * Sample recommended circuits : Input/Output Equivalent circuits Protective diode VCC Limiting resistance P-ch B input (0 V to 16 V) N-ch R WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. 2. Recommended Operating Conditions (AVSS = VSS = 0.0 V) Parameter Power supply voltage LCD power supply voltage Operating temperature Symbol VCC AVCC Value Unit Remarks Min Max 2.2* 5.5 V Operation assurance range MB89485 3.5* 5.5 V Operation assurance range MB89P485 2.7* 5.5 V Operation assurance range MB89PV480 1.5 5.5 V Retains the RAM state in stop mode MB89485, MB89P485, MB89PV480 2.2* 3.6 V Operation assurance range Retains the RAM state in stop mode 1.5 3.6 V V0 to V3 Vss Vcc V TA -40 +85 C MB89485L, MB89P485L * : These values depend on the operating conditions and the analog assurance range. See Figure 1, 2, 3 and "5. A/D Converter Electrical Characteristics." DS07-12559-2E 27 MB89480 Series Figure 1 Operating Voltage vs. Main Clock Operating Frequency (MB89P485/485) Operating voltage (V) 5.5 Analog accuracy assurance range : Vcc = AVcc =4.5V~5.5V 5.0 4.5 4.0 3.5 3.0 2.7 2.2 2.0 Main clock operating freq. (MHz) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 12.5 4.0 2.0 1.33 1.0 0.8 0.66 0.57 0.50 0.44 0.4 0.36 0.33 0.32 Min execution time (inst. cycle) (s) Note : The shaded area is not assured for MB89P485 Figure 2 Operating Voltage vs. Main Clock Operating Frequency (MB89P485L/485L) Operating voltage (V) 3.6 Analog accuracy assurance range : Vcc = AVcc = 2.7V~3.6V 3.0 2.7 2.2 2.0 Main clock operating freq. (MHz) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 12.5 4.0 2.0 1.33 1.0 0.8 0.66 0.57 0.50 0.44 0.4 0.36 0.33 0.32 Min execution time (inst. cycle) (s) Note : The shaded area is not assured for MB89P485L 28 DS07-12559-2E MB89480 Series Figure 3 Operating Voltage vs. Main Clock Operating Frequency (MB89PV480) Operating voltage (V) 5.5 Analog accuracy assurance range : Vcc = AVcc = 4.5V~5.5V 5.0 4.5 4.0 3.5 3.0 2.7 Main clock operating Freq. (MHz) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 12.5 4.0 2.0 1.33 1.0 0.8 0.66 0.57 0.50 0.44 0.4 0.36 0.33 0.32 Min execution time (inst. cycle) (s) Figure 1, 2 and 3 indicate the operating frequency of the external oscillator at an instruction cycle of 4/FCH. Since the operating voltage range is dependent on the instruction cycle, see minimum execution time if the operating speed is switched using a gear. WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their representatives beforehand. DS07-12559-2E 29 MB89480 Series 3. DC Characteristics (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485, AVSS = VSS = 0.0 V, TA = -40C to +85C) AVCC = VCC = 3.0 V for MB89P485L, MB89485L, AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Parameter Symbol Pin Condition Unit Remarks Min Typ Max VIH P00 to P07, P10 to P17, P20 to P27, P40 to P47, P50 to P57 -- 0.7 VCC -- VCC + 0.3 V VIHS RST, MODE, EC1, EC2, PWC, SCK, SI, INT10 to INT13, INT20 to INT27 -- 0.8 VCC -- VCC + 0.3 V VIL P00 to P07, P10 to P17, P20 to P27, P40 to P47, P50 to P57 -- VSS - 0.3 -- 0.3 VCC V VILS RST, MODE, EC1, EC2, PWC, SCK, SI, INT10 to INT13, INT20 to INT27 -- VSS - 0.3 -- 0.2 VCC V VD P10 to P17, P24 to P27, P30 to P31, P40 to P47, P50 to P56 "H" level input voltage "L" level input voltage Open-drain output pin application voltage "H" level output voltage "L" level output voltage VOH P00 to P07, P20 to P23 P00 to P07, P10 to P17, P20 to P27, P30 to P31, P40 to P47, P50 to P56, RST VOL -- VSS - 0.3 V -- V3 -- -- V MB89PV480, MB89P485, MB89485 2.2 -- -- V MB89P485L, MB89485L -- -- 0.4 V MB89PV480, MB89P485, MB89485 -- -- 0.4 V MB89P485L, MB89485L -- -- 0.4 V MB89P485L, MB89485L IOL = 4.0 mA IOL = 2.0 mA Product with booster 4.0 IOH = -2.0 mA P00 to P07, P20 to P23, RST P10 to P17, P24 to P27, P30 to P31, P40 to P47, P50 to P56 Product without booster VCC + 0.3 (Continued) 30 DS07-12559-2E MB89480 Series (Continued) (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485, AVSS = VSS = 0.0 V, TA = -40C to +85C) AVCC = VCC = 3.0 V for MB89P485L, MB89485L, AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Parameter Symbol Pin Condition Unit Remarks Min Typ Max ILI P00 to P07, P10 to P17, P20 to P27, P40 to P47, P50 to P57 0.45 V < VI < VCC -5 -- +5 A Open-drain output leakage current ILOD P10 to P17, P24 to P27, P30 to P31, P40 to P47, P50 to P56 0.45 V < VI < VCC -5 -- +5 A Pull-down resistance RDOWN MODE VI = VCC 25 50 100 k Except MB89P485, MB89P485L RPULL P00 to P07, P20 to P23, RST k When pull-up resistor is selected (except RST) Input leakage current Pull-up resistance FCH = 10 MHz, tinst = 0.4 s, Main clock run mode ICC1 FCH = 10 MHz, tinst = 6.4 s, Main clock run mode ICC2 Power supply current ICCS1 ICCS2 ICCL VI = 0.0 V VCC FCH = 10 MHz, tinst = 0.4 s, Main clock sleep mode FCH = 10 MHz, tinst = 6.4 s, Main clock sleep mode FCL = 32.768 kHz, TA = +250C, Sub-clock run mode Without pull-up resistor 25 50 100 -- 6 13 -- 3 7 -- 5 10 -- 4 8 MB89P485L -- 0.9 3 MB89485 -- 0.4 1.5 -- 0.9 3 -- 0.5 2 MB89P485L -- 2 5 MB89485 -- 1 2.5 -- 2.5 5 -- 1.2 2.5 -- 0.7 2 -- 0.3 1 -- 0.9 2 -- 0.4 1 MB89P485L -- 40 85 MB89485 -- 22 50 -- 400 800 -- 25 50 MB89485 mA mA mA MB89485L MB89P485 MB89485L MB89P485 MB89485L MB89P485 MB89P485L MB89485 mA A MB89485L MB89P485 MB89485L MB89P485 MB89P485L (Continued) DS07-12559-2E 31 MB89480 Series (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485, AVSS = VSS = 0.0 V, TA = -40C to +85C) AVCC = VCC = 3.0 V for MB89P485L, MB89485L, AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Parameter Symbol Pin Condition Unit Remarks Min Typ Max FCL = 32.768 kHz, TA = +250C, Sub-clock sleep mode ICCLS 0 ICCT Power supply current TA = +25 C, Watch mode, Main clock stop mode VCC TA = +250C, Sub-clock stop mode ICCH IA A/D conversion active AVcc TA = +250C, A/D conversion stop IAH Common output impedance -- 15 30 MB89485 -- 7 15 -- 12 30 -- 7 15 MB89P485L -- 2 10 MB89485 -- 1 5 -- 5 15 -- 1 5 MB89P485L -- 1 5 MB89485 -- 0.8 4 -- 3 10 -- 0.8 4 MB89P485L -- 1.3 6 MB89485 -- 1 3 -- 1.3 6 -- 1 3 MB89P485L -- 1 5 MB89485 -- 0.8 4 -- 1 5 -- 0.8 4 A A A mA A Segment output impedance RVSEG LCD divided resistance RLCD COM0 to COM3 SEG0 to SEG30 -- MB89P485 MB89485L MB89P485 MB89485L MB89P485 MB89485L MB89P485 MB89485L MB89P485 MB89P485L MB89P485L, MB89485L V1 to V3 = +3.0 V RVCOM MB89485L -- -- 2.5 k V1 to V3 = +5.0 V MB89PV480, MB89P485, MB89485 V1 to V3 = +3.0 V MB89P485L, MB89485L -- -- 15 k 300 500 750 k V1 to V3 = +5.0 V Between VCC and VSS MB89PV480, MB89P485, MB89485 (Continued) 32 DS07-12559-2E MB89480 Series (Continued) (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485, AVSS = VSS = 0.0 V, TA = -40C to +85C) AVCC = VCC = 3.0 V for MB89P485L, MB89485L, AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Parameter Symbol Pin Condition Unit Remarks Min Typ Max LCD controller/ driver leakage current Booster for LCD driving output voltage ILCDL V0 to V3, COM0 to COM3, SEG0 to SEG30 VV3 V3 VV2 V2 Reference input voltage for LCD driving VV1 V1 Reference voltage input impedance RRIN V1 Input CIN capacitance DS07-12559-2E Other than VCC, VSS, AVCC, AVSS -- -- 1 A V1 = 1.5 V 4.3 4.5 4.7 V V1 = 1.5 V 2.9 3.0 3.1 V -- IIN = 0.0 A -- f = 1 MHz 1.4 1.5 1.7 V 8.5 9.8 11 k -- 5 15 pF Products with booster only 33 MB89480 Series 4. AC Characteristics (1) Reset Timing (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485, AVSS = VSS = 0.0 V, TA = -40C to +85C) AVCC = VCC = 3.0 V for MB89P485L, MB89485L, AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Symbol Condition Unit Remarks Parameter Min Max RST "L" pulse width tZLZH -- 48 tHCYL -- ns Note : tHCYL is the oscillation cycle (1/FCH) to input to the X0 pin. The MCU operation is not guaranteed when the "L" pulse width is shorter than tZLZH. tZLZH RST 0.2 VCC 0.2 VCC (2) Power-on Reset (AVSS = VSS = 0.0 V, TA = -40C to +85C) Parameter Symbol Power supply rising time tR Power supply cut-off time tOFF Condition -- Value Unit Min Max -- 50 ms 1 -- ms Remarks Due to repeated operations Note : Make sure that power supply rises within the selected oscillation stabilization time. Rapid changes in power supply voltage may cause a power-on reset. If power supply voltage needs to be varied in the course of operation, a smooth voltage rise is recommended. tR tOFF Vth VCC 0.2 V 0.2 V 0.2 V Vth = 3.5 V for MB89PV480, MB89P485 and MB89485 Vth = 1.8 V for MB89P485L and MB89485L 34 DS07-12559-2E MB89480 Series (3) Clock Timing Parameter Symbol Pin FCH X0, X1 1 -- 12.5 MHz FCL X0A, X1A -- 32.768 -- kHz tHCYL X0, X1 80 -- 1000 ns tLCYL X0A, X1A -- 30.5 -- s PWH PWL X0 20 -- -- ns PWHL PWLL X0A -- 15.2 -- s tCR tCF X0, X0A -- -- 10 ns Clock frequency Clock cycle time Input clock pulse width (AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Unit Remarks Typ Max Input clock rising/falling time Min External clock X0 and X1 Timing and Conditions tHCYL PWH PWL tCR tCF 0.8 VCC 0.8 VCC X0 0.2 VCC 0.2 VCC 0.2 VCC Main Clock Conditions When a crystal or ceramic reasonator is used X0 When an external clock is used X1 X0 X1 Open FCH C1 DS07-12559-2E C2 FCH 35 MB89480 Series Sub-clock Timing and Conditions tLCYL 0.8 VCC X0A 0.2 VCC PWHL PWLL tCR tCF Sub-clock Conditions When a crystal or ceramic oscillator is used X 0A When an external clock is used X0A X1A FCL X1A Rd When subclock is not used X0A X1A Open Open FCL C0 C1 (4) Instruction Cycle Parameter Instruction cycle (minimum execution time) 36 Symbol Value Unit Remarks 4/FCH, 8/FCH, 16/FCH, 64/FCH s (4/FCH)tinst = 0.32 s when operating at FCH = 12.5 MHz 2/FCL s tinst = 61.036 s when operating at FCL = 32.768 kHz tinst DS07-12559-2E MB89480 Series (5) Serial I/O Timing Parameter Serial clock cycle time (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485, AVCC = VCC = 3.0 V for MB89P485L, MB89485L AVSS = VSS= 0.0 V, TA = -40C to +85C) Value Symbol Pin Condition Unit Min Max tSCYC SCK SCK SO time tSLOV SCK, SO Valid SI SCK tIVSH SI, SCK SCK valid SI hold time tSHIX SCK, SI Serial clock "H" pulse width tSHSL Serial clock "L" pulse width tSLSH SCK SO time tSLOV SCK, SO Valid SI SCK tIVSH SI, SCK SCK valid SI hold time tSHIX SCK, SI Internal shift clock mode SCK External shift clock mode 2 tinst* -- s -200 200 ns 1/2 tinst* -- s 1/2 tinst* -- s 1 tinst* -- s 1 tinst* -- s 0 200 ns 1/2 tinst* -- s 1/2 tinst* -- s * : For information on tinst, see "(4) Instruction Cycle." DS07-12559-2E 37 MB89480 Series Internal Clock Operation tSCYC SCK 2.4 V 0.8 V 0.8 V tSLOV SO 2.4 V 0.8 V tIVSH SI tSHIX 0.8 VCC 0.8 VCC 0.2 VCC 0.2 VCC External Clock Operation tSLSH tSHSL SCK 0.8 VCC 0.8 VCC 0.2 VCC 0.2 VCC tSLOV SO 2.4 V 0.8 V tIVSH SI 38 tSHIX 0.8 VCC 0.8 VCC 0.2 VCC 0.2 VCC DS07-12559-2E MB89480 Series (6) Peripheral Input Timing Parameter (AVCC = VCC = 5.0 V for MB89PV480, MB89P485, MB89485 AVCC = VCC = 3.0 V for MB89P485L, MB89485L AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Pin Unit Remarks Min Max Symbol Peripheral input "H" pulse width 1 tILIH1 Peripheral input "L" pulse width 1 tIHIL1 INT10 to INT13, INT20 to INT27, EC1, EC2, PWC 2 tinst* -- s 2 tinst* -- s * : For information on tinst, see "(4) Instruction Cycle." t IHIL1 INT10 to INT13, INT20 to INT27, EC1, EC2, PWC DS07-12559-2E t ILIH1 0.8 VCC 0.2 VCC 0.8 VCC 0.2 VCC 39 MB89480 Series 5. A/D Converter Electrical Characteristics (1) A/D Converter Electrical Characteristics ( AVCC = VCC = 4.5 V to 5.5 V for MB89PV480, MB89P485, MB89485, AVCC = VCC = 2.7 V to 3.6 V for MB89P485L, MB89485L, AVSS = VSS = 0.0 V, TA = -40C to +85C) Value Parameter Symbol Pin Unit Remarks Min Typ Max Resolution Total error Linearity error -- Differential linearity error -- -- 10 -- bit -- -- 4.0 LSB -- -- 2.5 LSB -- -- 1.9 LSB Zero transition voltage VOT AVSS - 1.5 LSB AVSS + 0.5 LSB AVSS + 2.5 LSB V Full-scale transition voltage VFST AVCC - 4.5 LSB AVCC - 2.5 LSB AVCC - 0.5 LSB V A/D mode conversion time -- -- -- 60 tinst* s Analog port input current IAIN -- -- 10 A Analog input voltage VAIN AVSS -- AVCC V AN0 to AN3 * : For information on tinst, see "(4) Instruction Cycle" in "4. AC Characteristics". (2) A/D Converter Glossary * Resolution Analog changes that are identifiable with the A/D converter. When the number of bits is 10, analog voltage can be divided into 210 = 1024. * Linearity error (unit: LSB) The deviation of the straight line connecting the zero transition point ("00 0000 0000" "00 0000 0001") with the full-scale transition point ("11 1111 1111" "11 1111 1110") from actual conversion characteristics. * Differential linearity error (unit: LSB) The deviation of input voltage needed to change the output code by 1 LSB from the theoretical value. * Total error (unit: LSB) The difference between theoretical and actual conversion values. 40 DS07-12559-2E MB89480 Series Theoretical I/O characteristics 3FF Total error 3FF VFST 3FE 3FE 3FD 1.5 LSB Digital output Digital output 3FD 004 003 Actual conversion value {1 LSB x N + VOT} 004 VNT 003 VOT 002 Actual conversion value 002 1 LSB Theoretical value 001 001 0.5 LSB AVCC AVSS Analog input VFST - VOT 1022 1 LSB = Total error = VNT - {1 LSB x N + 0.5 LSB} 1 LSB (V) Full-scale transition error Zero transition error 004 Theoretical value Actual conversion value 3FF Actual conversion value Digital output Digital output 003 002 3FE VFST (Actual measurement) 3FD Actual conversion value 001 Actual conversion value 3FC VOT (Actual measurement) AVSS AVSS AVCC Analog input AVCC Analog input Differential linearity error Linearity error Theoretical value 3FF Actual conversion value 3FE N+1 {1 LSB x N + VOT} Actual conversion value VNT VFST (Actual measurement) 004 Digital output 3FD Digital output AVCC AVSS Analog input V(N + 1)T N N-1 003 VNT Actual conversion value Actual conversion value 002 Theoretical value 001 N-2 VOT (Actual measurement) AVCC AVSS Analog input Linearity error = DS07-12559-2E VNT - {1 LSB x N + VOT} 1 LSB AVCC AVSS Analog input Differential linearity error = V(N + 1)T - VNT 1 LSB -1 41 MB89480 Series (3) Notes on Using A/D Converter * Input impedance of the analog input pins The A/D converter used for the MB89480 series contains a sample and hold circuit as illustrated below to fetch analog input voltage into the sample and hold capacitor for 16 instruction cycles after activation A/D conversion. For this reason, if the output impedance of the external circuit for the analog input is high, analog input voltage might not stabilize within the analog input sampling period. Therefore, it is recommended to keep the output impedance of the external circuit low. Note that if the impedance cannot be kept low, it is recommended to connect an external capacitor of about 0.1 F for the analog input pin. Sample and hold circuit Analog input pin Comparator If the analog input impedance is higher than 10 k, it is recommended to connect an external capacitor of approx. 0.1 F. R C Close for 16 instruction cycles after activating A/D conversion. Analog channel selector R: analog input equivalent resistance C: analog input equivalent capacitance 42 MB89485 MB89PV480 2.2 k 45 pF MB89485L MB89P485 MB89P485L 2.8 k 46 pF 2.6 k 28 pF 7.1 k 48.3 pF DS07-12559-2E MB89480 Series EXAMPLE CHARACTERISTICS (1) "L" level output voltage VOL vs. IOL (MB89485) VOL [V] VCC = 3.0 V 1.2 VCC = 3.5 V VCC = 4.0 V VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V VCC = 6.0 V 1.0 0.8 VOL vs. IOL (MB89485L) VCC = 2.5 V VOL [V] TA = + 25 C TA = + 25 C 0.6 0.4 VCC = 2.0 V VCC = 3.0 V 0.8 VCC = 3.5 V 0.6 VCC = 4.0 V 0.4 0.2 0.2 IOL [mA] 0 2 4 6 8 IOL [mA] 0.0 0.0 10 0 2 4 6 8 10 (2) "H" level output voltage VCC-VOH vs. IOH (MB89485) 2.0 VCC = 3.0 V VCC-VOH [V] VCC-VOH vs. IOH (MB89485L) VCC = 3.5 V 2.0 VCC-VOH [V] TA = + 25 C VCC = 4.0 V VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V VCC = 6.0 V 1.2 1.6 0.8 0.4 0.4 IOH [mA] 0.0 DS07-12559-2E -4 -6 -8 - 10 VCC = 3.0 V 1.2 0.8 -2 VCC = 2.5 V TA = + 25 C 1.6 0 VCC = 2.0 V VCC = 3.5 V VCC = 4.0 V IOH [mA] 0.0 0 -2 -4 -6 -8 - 10 43 MB89480 Series (3) "H" level input voltage/"L" level input voltage CMOS input (MB89485) CMOS hysteresis input (MB89485) VIN [V] 4.0 VIN [V] 4.0 TA = +25 oC TA = +25oC 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 VIHS VILS 1 2 3 4 5 6 7 Vcc [V] 1 2 3 4 5 6 7 Vcc [V] VIHS : Threshold when input voltage in hysteresis characteristics is set to "H" level. VILS : Threshold when input voltage in hysteresis characteristics is set to "L" level. 44 DS07-12559-2E MB89480 Series (4) Power supply current (External clock) ICC1 vs. VCC (MB89485) ICC2 vs. VCC (MB89485) ICC1 [mA] ICC2 [mA] 10.0 1.6 TA = + 25 C TA = + 25 C FCH = 12.5 MHz FCH = 12.5 MHz 1.4 FCH = 10.0 MHz 8.0 FCH = 8.0 MHz 6.0 1.2 FCH = 10.0 MHz 1.0 FCH = 8.0 MHz 0.8 4.0 FCH = 4.0 MHz FCH = 4.0 MHz 0.6 FCH = 2.0 MHz FCH = 1.0 MHz 0.4 2.0 FCH = 2.0 MHz FCH = 1.0 MHz 0.2 0.0 0.0 1 2 3 4 5 6 1 7 2 3 4 5 6 7 VCC [V] VCC [V] ICCS1 vs. VCC (MB89485) ICCS2 vs. VCC (MB89485) ICCS1 [mA] ICCS2 [mA] 3.5 FCH = 12.5 MHz TA = + 25 C 3.0 FCH = 10.0 MHz 1.2 TA = + 25 C FCH = 12.5 MHz 1.0 FCH = 10.0 MHz 2.5 FCH = 8.0 MHz FCH = 8.0 MHz 0.8 2.0 0.6 FCH = 4.0 MHz 1.5 FCH = 4.0 MHz 1.0 FCH = 2.0 MHz FCH = 1.0 MHz 0.5 0.0 FCH = 2.0 MHz FCH = 1.0 MHz 0.4 0.2 0.0 1 2 3 4 5 6 7 VCC [V] 1 2 3 4 5 6 7 VCC [V] (Continued) DS07-12559-2E 45 MB89480 Series ICC1 vs. VCC (MB89485L) 7.0 ICC2 vs. VCC (MB89485L) ICC1 [mA] ICC2 [mA] 1.0 TA = + 25 C TA = + 25 C FCH = 12.5 MHz 6.0 FCH = 12.5 MHz 0.8 5.0 FCH = 10.0 MHz 4.0 FCH = 8.0 MHz 3.0 FCH = 10.0 MHz FCH = 8.0 MHz 0.6 0.4 2.0 FCH = 4.0 MHz 1.0 FCH = 2.0 MHz FCH = 1.0 MHz 0.0 FCH = 4.0 MHz FCH = 2.0 MHz FCH = 1.0 MHz 0.2 0.0 1 2 3 5 4 1 VCC [V] ICCS1 vs. VCC (MB89485L) 2 3 4 5 VCC [V] ICCS2 vs. VCC (MB89485L) ICCS1 [mA] ICCS2 [mA] 0.7 2.4 TA = + 25 C TA = + 25 C 2.0 FCH = 12.5 MHz 1.6 FCH = 10.0 MHz FCH = 8.0 MHz 1.2 0.6 FCH = 12.5 MHz 0.5 FCH = 10.0 MHz 0.4 FCH = 8.0 MHz 0.3 FCH = 4.0 MHz 0.8 FCH = 4.0 MHz 0.2 0.4 FCH = 2.0 MHz FCH = 1.0 MHz 0.1 FCH = 2.0 MHz FCH = 1.0 MHz 0.0 0.0 1 2 3 4 5 VCC [V] 1 2 3 4 5 VCC [V] (Continued) 46 DS07-12559-2E MB89480 Series (Continued) ICCL vs. VCC (MB89485) ICCT vs. VCC (MB89485) ICCL [A] ICCT [A] 2.8 60 TA = + 25 C FCL = 32.768 kHz 50 TA = + 25 C 2.4 FCL = 32.768 kHz 2.0 40 1.6 30 1.2 20 0.8 10 0.4 0.0 0 1 2 3 4 5 6 7 VCC [V] 1 2 3 4 5 6 7 VCC [V] ICCLS vs. VCC (MB89485) ICCLS [A] 16 TA = + 25 C 14 FCL = 32.768 kHz 12 10 8 6 4 2 0 1 2 3 4 5 6 7 VCC [V] DS07-12559-2E 47 MB89480 Series (5) Pull-up resistance RPULL vs. VCC (MB89485) RPULL vs. VCC (MB89485L) RPULL [k] 200 320 RPULL [k] 280 160 240 200 120 160 80 120 80 TA = + 85 C TA = + 25 C TA = - 40 C 40 0 1 2 3 4 5 6 7 VCC [V] 48 TA = + 85 C TA = + 25 C TA = - 40 C 40 0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VCC [V] DS07-12559-2E MB89480 Series MASK OPTIONS Part number No. MB89485 MB89485L MB89P485 MB89P485L MB89PV480 Setting not possible Setting not possible Specifying procedure Specify when ordering mask 1 Booster selection (KSV) * Internal resistor ladder * Booster Selectable 2 Selection of OTPROM content protection feature * No protection feature * With protection feature -- 101/102 : No protection 103/104 : With protection -- 3 Selection of oscillation stabilization time (OSC) 214/FCH (approx.1.3 ms) 217/FCH (approx.10.5 ms) 218/FCH (approx.21.0 ms) Selectable OSC 218/FCH (approx.21.0 ms) 218/FCH (approx.21.0 ms) 4 Selection of power-on stabilization time * Nil * 217/FCH DS07-12559-2E Selectable Fixed to nil 101/103 : Internal resistor 101 : Internal resistor ladder ladder 102/104: Booster 102: Booster 217/FCH Fixed to nil Fixed to nil 49 MB89480 Series ORDERING INFORMATION Part number Package MB89485PMC MB89P485-101PMC MB89P485-102PMC MB89P485-103PMC MB89P485-104PMC MB89485LPMC MB89P485L-101PMC MB89P485L-102PMC MB89P485L-103PMC MB89P485L-104PMC 64-pin Plastic QFP (FPT-64P-M23) MB89485P-SH MB89P485-101P-SH MB89P485-102P-SH MB89P485-103P-SH MB89P485-104P-SH MB89485LP-SH MB89P485L-101P-SH MB89P485L-102P-SH MB89P485L-103P-SH MB89P485L-104P-SH 64-pin Plastic SH-DIP (DIP-64P-M01) MB89PV480-101C-SH MB89PV480-102C-SH 64-pin Ceramic MDIP (MDP-64C-P02) MB89PV480-101CF MB89PV480-102CF 64-pin Ceramic MQFP (MQP-64C-P01) 50 Remarks 101: With internal resistor ladder, without content protection 102: With booster, without content protection 103: With internal resistor ladder, with content protection 104: With booster, with content protection DS07-12559-2E MB89480 Series PACKAGE DIMENSIONS 64-pin plastic SH-DIP Lead pitch 1.778mm(70mil) Package width x package length 17 x 58 mm Sealing method Plastic mold Mounting height 5.65 mm MAX (DIP-64P-M01) 64-pin plastic SH-DIP (DIP-64P-M01) Note: Pins width and pins thickness include plating thickness. +0.22 +.009 58.00 -0.55 2.283 -.022 INDEX-1 17.000.25 (.669.010) INDEX-2 +0.70 4.95 -0.20 +.028 .195 -.008 +0.50 0.70 -0.19 +.020 .028 -.007 0.270.10 (.011.004) +0.20 3.30 -0.30 .130 +.008 -.012 +0.40 1.378 -0.20 .0543 C +.016 -.008 1.778(.0700) 0.470.10 (.019.004) 19.05(.750) +0.50 0.25(.010) M 2001-2008 FUJITSU MICROELECTRONICS LIMITED D64001S-c-4-6 1.00 -0 .039 +.020 -.0 0~15 Dimensions in mm (inches). Note: The values in parentheses are reference values. Please confirm the latest Package dimension by following URL. http://edevice.fujitsu.com/package/en-search/ (Continued) DS07-12559-2E 51 MB89480 Series 64-pin plastic LQFP Lead pitch 0.65 mm Package width x package length 12.0 x 12.0 mm Lead shape Gullwing Sealing method Plastic mold Mounting height 1.70 mm MAX Code (Reference) P-LFQFP64-12x12-0.65 (FPT-64P-M23) 64-pin plastic LQFP (FPT-64P-M23) Note 1) * : These dimensions do not include resin protrusion. Note 2) Pins width and pins thickness include plating thickness. Note 3) Pins width do not include tie bar cutting remainder. 14.000.20(.551.008)SQ *12.000.10(.472.004)SQ 48 0.1450.055 (.0057.0022) 33 32 49 0.10(.004) Details of "A" part +0.20 1.50 -0.10 +.008 (Mounting height) .059 -.004 0.25(.010) INDEX 0~8 17 64 1 "A" 16 0.65(.026) 0.320.05 (.013.002) 0.13(.005) 0.500.20 (.020.008) 0.600.15 (.024.006) 0.100.10 (.004.004) (Stand off) M (c)2003-2008 FUJITSU LIMITED F64034S-c-1-2 C 2003 FUJITSU LIMITEDMICROELECTRONICS F64034S-c-1-1 Dimensions in mm (inches). Note: The values in parentheses are reference values Please confirm the latest Package dimension by following URL. http://edevice.fujitsu.com/package/en-search/ (Continued) 52 DS07-12559-2E MB89480 Series 64-pin ceramic MDIP Lead pitch 1.778mm (70mil) Row spacing 19.05mm (750mil) Motherboard material Ceramic Mounted packing material Plastic (MDP-64C-P02) 64-pin ceramic MDIP (MDP-64C-P02) 0~9 56.900.64 (2.240.025) 15.24(.600) TYP 18.750.30 (.738.012) INDEX AREA 2.540.25 (.100.010) 33.02(1.300)REF 0.250.05 (.010.002) 1.270.25 (.050.010) 10.16(.400)MAX 1.7780.25 (.070.010) C 19.050.30 (.750.012) +0.13 0.46 -0.08 +.005 .018 -.003 55.12(2.170)REF 0.900.13 (.035.005) 1994-2008 FUJITSU MICROELECTRONICS LIMITED M64002SC-1-5 3.430.38 (.135.015) Dimensions in mm (inches). Note: The values in parentheses are reference values. Please confirm the latest Package dimension by following URL. http://edevice.fujitsu.com/package/en-search/ (Continued) DS07-12559-2E 53 MB89480 Series (Continued) 64-pin ceramic MQFP Lead pitch 1.00 mm Lead shape Straight Motherboard material Ceramic Mounted package material Plastic (MQP-64C-P01) 64-pin ceramic MQFP (MQP-64C-P01) 18.70(.736)TYP INDEX AREA 16.300.33 (.642.013) 15.580.20 (.613.008) 12.00(.472)TYP +0.40 1.20 0.20 .047 1.000.25 (.039.010) +.016 .008 1.000.25 (.039.010) 1.270.13 (.050.005) 18.120.20 12.02(.473) (.713.008) TYP 10.16(.400) 14.22(.560) TYP TYP 22.300.33 (.878.013) 24.70(.972) TYP 0.30(.012) TYP 1.270.13 (.050.005) 0.30(.012)TYP 18.00(.709) TYP 0.400.10 (.016.004) 7.62(.300)TYP 0.400.10 (.016.004) +0.40 1.20 0.20 +.016 .047 .008 9.48(.373)TYP 11.68(.460)TYP 0.50(.020)TYP C 10.82(.426) 0.150.05 MAX (.006.002) 1994-2008 FUJITSU MICROELECTRONICS LIMITED M64004SC-1-4 Dimensions in mm (inches). Note: The values in parentheses are reference values. Please confirm the latest Package dimension by following URL. http://edevice.fujitsu.com/package/en-search/ 54 DS07-12559-2E MB89480 Series MAIN CHANGES IN THIS EDITION Page Section Change Results Changed the series name; MB89480/MB89480L series MB89480 series Changed the package code. FPT-64P-M09 FPT-64P-M23 18 PROGRAMMING TO THE EPROM WITH Deleted the "2. Programming Socket Adapter" PIGGYBACK/EVALUATION DEVICE 40 ELECTRICAL CHARACTERISTICS 5. A/D Converter Electrical Characteristics Changed the unit of "Zero transition voltage" and "Full-scale transition voltage". mV V 50 ORDERING INFORMATION Changed the order informations. MB89485PFM MB89485PMC MB89P485-101PFM MB89P485-101PMC MB89P485-102PFM MB89P485-102PMC MB89P485-103PFM MB89P485-103PMC MB89P485-104PFM MB89P485-104PMC MB89485LPFM MB89485LPMC MB89P485L-101PFM MB89P485L-101PMC MB89P485L-102PFM MB89P485L-102PMC MB89P485L-103PFM MB89P485L-103PMC MB89P485L-104PFM MB89P485L-104PMC 52 PACKAGE DIMENSIONS Changed the package figure. FPT-64P-M09 FPT-64P-M23 The vertical lines marked in the left side of the page show the changes. DS07-12559-2E 55 MB89480 Series FUJITSU MICROELECTRONICS LIMITED Shinjuku Dai-Ichi Seimei Bldg., 7-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo 163-0722, Japan Tel: +81-3-5322-3347 Fax: +81-3-5322-3387 http://jp.fujitsu.com/fml/en/ For further information please contact: North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel: +1-408-737-5600 Fax: +1-408-737-5999 http://www.fma.fujitsu.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. 151 Lorong Chuan, #05-08 New Tech Park 556741 Singapore Tel : +65-6281-0770 Fax : +65-6281-0220 http://www.fmal.fujitsu.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://emea.fujitsu.com/microelectronics/ FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. Rm. 3102, Bund Center, No.222 Yan An Road (E), Shanghai 200002, China Tel : +86-21-6146-3688 Fax : +86-21-6335-1605 http://cn.fujitsu.com/fmc/ Korea FUJITSU MICROELECTRONICS KOREA LTD. 206 Kosmo Tower Building, 1002 Daechi-Dong, Gangnam-Gu, Seoul 135-280, Republic of Korea Tel: +82-2-3484-7100 Fax: +82-2-3484-7111 http://kr.fujitsu.com/fmk/ FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 10/F., World Commerce Centre, 11 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel : +852-2377-0226 Fax : +852-2376-3269 http://cn.fujitsu.com/fmc/en/ Specifications are subject to change without notice. For further information please contact each office. All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device; FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited: Business & Media Promotion Dept.