Rev.1.00 Oct. 06, 2005 page 1 of 7
RD74LVC1G32
2–input OR Gate REJ03D0511-0100
Rev.1.00
Oct. 06, 2005
Description
The RD74LVC1G32 has two–input OR gate in a 5-pin package. Low voltage and high-speed operation is suitable for
the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
• The basic gate function is lined up as renesas uni logic series.
• Supply voltage range: 1.65 to 5.5 V
• Operating temperature range: –40 to +85°C
• All inputs: VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• All outputs: VO (Max.) = 5.5 V (@VCC = 0 V)
• Output current: ±4 mA (@VCC = 1.65 V)
±8 mA (@VCC = 2.3 V)
±24 mA (@VCC = 3.0 V)
±32 mA (@VCC = 4.5 V)
• Ordering Information
Part Name Package Type Package Code
(Previous Code) Package
Abbreviation Taping Abbreviation
(Quantity)
RD74LVC1G32WPE WCSP-5 pin SXBG0005LB-A
(TBS-5CV) WP E (3,000 pcs/reel)
Article indication
E 4 Y M
Marking
Year code
Month code
Package Code
(Previous Code)
Package
Abbreviation
RD74LVC1G32WPE WCSP-5 pin SXBG0005LB-A
(TBS-5CV)
WP E (3,000 pcs/reel)
RD74LVC1G32
Rev.1.00 Oct. 06, 2005 page 2 of 7
Pin Arrangement
(Bottom view) (Top view)
OUTY
15
2
34GND
Height 0.4 mm
0.4 mm pitch
0.17 mm 5–Ball (WP)
0.7 mm
1.1 mm
INA
INB V
CC
Pin#1 INDEX
Logic Diagram
A
BY
Function Table
Inputs
A B Output Y
L L L
H L H
L H H
H H H
H: High level
L: Low level
Y
Inputs
A B
L L L
H L H
L H H
L H H
H H H
RD74LVC1G32
Rev.1.00 Oct. 06, 2005 page 3 of 7
Absolute Maximum Ratings
Item Symbol Ratings Unit Test Conditions
Supply voltage range VCC –0.5 to 6.5 V
Input voltage range *1 V
I–0.5 to 6.5 V
–0.5 to VCC +0.5 Output: H or L Output voltage range *1, 2 V
O–0.5 to 6.5 VVCC: OFF
Input clamp current IIK –50 mA VI < 0
Output clamp current IOK –50 mA VO < 0
Continuous output current IO ±50 mA VO = 0 to VCC
Continuous current through
VCC or GND ICC or IGND ±100 mA
Package Thermal impedance θja 200 °C/W WP
Storage temperature Tstg –65 to 150 °C
Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 5.5 V maximum.
Recommended Operating Conditions
Item Symbol Min Max Unit Conditions
Supply voltage range VCC 1.65 5.5 V
Input voltage range VI 0 5.5 V
Output voltage range VO 0 VCC V
— 4 VCC = 1.65 V
— 8 VCC = 2.3 V
— 16
— 24 VCC = 3.0 V
IOL
— 32 VCC = 4.5 V
— –4 VCC = 1.65 V
— –8 VCC = 2.3 V
— –16
— –24 VCC = 3.0 V
Output current
IOH
— –32
mA
VCC = 4.5 V
0 20 VCC = 1.65 to 1.95 V,
2.3 to 2.7 V
0 10 VCC = 3.0 to 3.6 V
Input transition rise or fall rate ∆t / ∆v
0 5
ns / V
VCC = 4.5 to 5.5 V
Operating free-air temperature Ta –40 85 °C
Note: Unused or floating inputs must be held high or low.
Min Max Unit Conditions
1.65 5.5 V
0 5.5 V
0 V
CC
V
— 4 V
— 8 V
— 16
— 24
— 32 V
— –4 V
— –8 V
— –16
— –24
I
OH
— –32
— 4 V
mA
— 4 V
0 20 V
Input transition rise or fall rate
∆
t /
∆
v
Operating free-air temperature T
a
–40 85 °C
Note: Unused or floating inputs must be held high or low.
RD74LVC1G32
Rev.1.00 Oct. 06, 2005 page 4 of 7
Electrical Characteristics
Ta = –40 to 85°C
Item Symbol VCC (V) Min Typ Max Unit Test condition
1.65 to 1.95 VCC×0.65 — —
2.3 to 2.7 1.7 — —
3.0 to 3.6 2.0 — —
VIH
4.5 to 5.5 VCC×0.7 — —
1.65 to 1.95 — — VCC×0.35
2.3 to 2.7 — — 0.7
3.0 to 3.6 — — 0.8
Input voltage
VIL
4.5 to 5.5 — — VCC×0.3
V
Min to Max VCC–0.1 — — IOH = –100 µA
1.65 1.2 — — IOH = –4 mA
2.3 1.9 — — IOH = –8 mA
2.4 — — IOH = –16 mA 3.0 2.3 — — IOH = –24 mA
VOH
4.5 3.8 — — IOH = –32 mA
Min to Max — — 0.1 IOL = 100 µA
1.65 — — 0.45 IOL = 4 mA
2.3 — — 0.3 IOL = 8 mA
— — 0.4 IOL = 16 mA 3.0 — — 0.55 IOL = 24 mA
Output voltage
VOL
4.5 — — 0.55
V
IOL = 32 mA
Input current IIN 0 to 5.5 — — ±5 µA VIN = 5.5 V or GND
ICC 5.5 — — 10 VIN = VCC or GND, IO = 0
Quiescent
supply current ∆ICC 3 to 5.5 — — 500
µAOne input at VCC–0.6 V,
Other input at VCC or GND
Output leakage
current IOFF 0 — — ±10 µA VIN or VO = 0 to 5.5 V
Input capacitance CIN 3.3 — 4.0 — pF VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
2.3 — — I
4.5 3.8 — — I
Min to Max — — 0.1
1.65 — — 0.45 I
OL
2.3 — — 0.3 I
OL
= 8 mA
— — 0.4 I
OL
= 16 mA
— — 0.55 I
4.5 — — 0.55
0 to 5.5 — — ±5
5.5 — — 10 V
3 to 5.5 — — 500
0 — — ±10
3.3 — 4.0 — pF V
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
RD74LVC1G32
Rev.1.00 Oct. 06, 2005 page 5 of 7
Switching Characteristics
VCC = 1.8 ± 0.15 V
Ta = –40 to 85°C
Item Symbol Min Max Unit Test Conditions FROM
(Input) TO
(Output)
1.9 7.2 CL = 15 pF, RL = 1 MΩPropagation delay time tPLH
tPHL 2.8 8.0
ns
CL = 30 pF, RL = 1.0 kΩ
A or B Y
VCC = 2.5 ± 0.2 V
Ta = –40 to 85°C
Item Symbol Min Max Unit Test Conditions FROM
(Input) TO
(Output)
0.8 4.4 CL = 15 pF, RL = 1 MΩPropagation delay time tPLH
tPHL 1.2 5.5
ns
CL = 30 pF, RL = 500 Ω
A or B Y
VCC = 3.3 ± 0.3 V
Ta = –40 to 85°C
Item Symbol Min Max Unit Test Conditions FROM
(Input) TO
(Output)
0.9 3.6 CL = 15 pF, RL = 1 MΩPropagation delay time tPLH
tPHL 1.1 4.5
ns
CL = 50 pF, RL = 500 Ω
A or B Y
VCC = 5.0 ± 0.5 V
Ta = –40 to 85°C
Item Symbol Min Max Unit Test Conditions FROM
(Input) TO
(Output)
0.8 3.4 CL = 15 pF, RL = 1 MΩPropagation delay time tPLH
tPHL 1.0 4.0
ns
CL = 50 pF, RL = 500 Ω
A or B Y
Operating Characteristics
Ta = 25°C
Item Symbol VCC (V) Min Typ Max Unit Test Conditions
1.8 — 20 —
2.5 — 20 —
3.3 — 21 —
Power dissipation capacitance CPD
5.0 — 22 —
pF f = 10 MHz
Test Circuit
L
Note: C includes probe and jig capacitance.
CL
Measurement point
RL
*
From Output
Test Conditions
= 15 pF, R
L
= 1 M
= 50 pF, R
L
= 500
Ω
Unit
Test Conditions
0.8 3.4 C
L
= 15 pF, R
L
= 1 M
1.0 4.0
0.8 3.4 C
ns
0.8 3.4 C
C
L
= 50 pF, R
Ta = 25°C
Symbol
V
CC
(V)
Min Typ Max
1.8 — 20 —
2.5 — 20 —
3.3 — 21 —
Power dissipation capacitance C
Power dissipation capacitance C
PD
5.0 — 22 —
RD74LVC1G32
Rev.1.00 Oct. 06, 2005 page 6 of 7
90%
10%
tPLH tPHL
VCC
GND
VOH
VOL
trtf
90%
Vref
Vref Vref
Vref
10%
1.8±0.15
2.5±0.2
3.3±0.3
5.0±0.5
VICLRL
VCC VCC / 2
VCC / 2
VCC / 2
Vref
VCC (V)
≤ 2 ns
≤ 2 ns
≤ 2.5 ns
≤ 2.5 ns
VCC
VCC
3 V
15 pF 1 MΩ
1 MΩ
1 MΩ
1 MΩ
15 pF
15 pF
15 pF
1.5 V
INPUTS
tr / tf
1.8±0.15
2.5±0.2
3.3±0.3
5.0±0.5
VICLRL
VCC VCC / 2
VCC / 2
VCC / 2
Vref
VCC (V)
≤ 2 ns
≤ 2 ns
≤ 2.5 ns
≤ 2.5 ns
VCC
VCC
3 V
30 pF 1.0 kΩ
500 Ω
500 Ω
500 Ω
30 pF
50 pF
50 pF
1.5 V
INPUTS
tr / tf
• Waveforms
Input
Output
Notes: 1. Input waveform: PRR ≤ 10 MHz, Zo = 50 Ω.
2. The output are measured one at a time with one transition per measurement.
PHL
C
L
R
L
V
CC
/ 2
V
CC
/ 2
V
CC
/ 2
Vref
2 ns
2 ns
≤
2.5 ns
≤
2.5 ns
V
CC
3 V
15 pF 1 M
Ω
1 M
Ω
15 pF
15 pF
15 pF
1.5 V
1.8±0.15
2.5±0.2
3.3±0.3
5.0±0.5
V
I
V
CC
Vref
V
CC
(V)
≤
2 ns
≤
2 ns
≤
V
CC
V
CC
3 V
INPUTS
t
r
/ t
f
Notes: 1. Input waveform: PRR
2. The output are measured one at a time with one transition per measurement.
RD74LVC1G32
Rev.1.00 Oct. 06, 2005 page 7 of 7
Package Dimensions
*
1.10
0.15
0.1400.110
SXBG0005LB-A
b
Z
e
E
A
A
D
x
y
Z
1
MASS[Typ.]
0.15
0.05
(0.235)
0.15
0.19
Reference
Symbol
Dimension in Millimeters
Min Nom Max
Previous CodeJEITA Package Code
S-XFBGA5-0.7x1.1-0.40 RENESAS Code TBS-5CV 0.001g
0.40
2
A
0.70
0.40
0.05
0.20
E
D
e
eD
Z
D
Z
E
E
A
1
A
2
A
C
B
A
12
C
A
B
Seating plane
5 × φ b
Cφx
M
A B
Cφx
M
y C
*Reference value.
Pin#1 index area
Cy
1
y
1
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .3.0
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas T
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i
nformation on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvement
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distrib
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o
r errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Techn
ology Corp. Semiconductor
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a
nd algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products.
Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materi
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a lic
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com/en/network
" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
RENESAS SALES OFFICES