CoreCap(R) NPV Series NbO - Ceramic Multianode Chip Capacitors NPV MULTIANODE CONSTRUCTION * * * * * Multi-anode construction Super low ESR Non-burn safe technology 3x reflow 260C compatible V-Core filtering and power supply applications (e.g. servers, notebooks etc.) * CV range: 330-560F / 2.5-4V CASE DIMENSIONS: millimeters (inches) L W H Code EIA Code EIA Metric L0.20 (0.008) V 2924 7361-38 7.30 (0.287) W+0.20 (0.008) H+0.20 (0.008) -0.10 (0.004) -0.10 (0.004) 6.10 (0.240) 3.55 (0.140) W10.20 (0.008) A+0.30 (0.012) -0.20 (0.008) S Min. 3.10 (0.120) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. A S A W1 For part marking see page 130 HOW TO ORDER NPV V Type Case Size See table above 567 M 002 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier Tolerance M=20% Rated DC Voltage 002=2.5Vdc 004=4Vdc # Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel 0003 ESR in m TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current: Voltage Range (VR) Category Voltage (VC) Temperature Range: ESL: Reliability: +85C: +105C: All technical data relate to an ambient temperature of +25C 330 F to 560 F 20% 0.02CV (CV = capacitance x voltage) 2.5 4 1.7 2.7 -55C to +105C with category voltage Typically 2.5nH below 10MHz 0.2% per 1000 hours at 85C, 1xVR with 0.1/V series impedance with 60% confidence level 91 CoreCap(R) NPV Series NbO - Ceramic Multianode Chip Capacitors CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 330 337 470 477 560 567 680 687 1000 108 Rated Voltage DC to 85C / 0.66 Vr to 125C 4V (G) 6.3V (J) 10V (A) 16V (C) V (3) V (3) 2.5V (e) LEAD-FREE COMPATIBLE COMPONENT V (3) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. NON-BURN NON-SMOKE RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Capacitance (F) Rated Voltage (V) DCL (A) Max. DF ESR % Max. (m) Max. @300kHz 100kHz RMS Current (mA) MSL 25C 100kHz RMS Voltage (mV) 85C 125C 25C 85C 125C 4157 1848 14 12 6 4157 4157 1848 1848 14 14 12 12 6 6 2.5 Volt @ 85C (1.7 Volt @ 105C) NPVV567M002#0003 V 560 2.5 28 6 3 3 4619 4 Volt @ 85C (2.7 Volt @ 105C) NPVV337M004#0003 NPVV477M004#0003 V V 330 470 4 4 26.4 37.6 6 6 3 3 3 3 4619 4619 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. The EIA & CECC standards for low ESR solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. For typical weight and composition see page 123. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. ESR VS FREQUENCY PLOTS - TYPICAL Impedance ESR 10000 1000 ESR (mOhms) ESR (mOhms) 1000 100 10 100 10 1 1 100 92 1000 10000 Frequency (Hz) 100000 1000000 100 1000 10000 Frequency (Hz) 100000 1000000