Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised February 1999 MM74HCT138 3-to-8 Line Decoder General Description The MM74HCT138 decoder utilizes advanced silicon-gate CMOS technology, and are well suited to memory address decoding or data routing applications. Both circuits feature high noise immunity and low power consumption usually associated with CMOS circuitry, yet have speeds comparable to low power Schottky TTL logic. the 74LS138. All inputs are protected from damage due to static discharge by diodes to VCC and ground. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs. The MM74HCT138 have 3 binary select inputs (A, B, and C). If the device is enabled these inputs determine which one of the eight normally HIGH outputs will go LOW. Two active LOW and one active HIGH enables (G1, G2A and G2B) are provided to ease the cascading decoders. Features The decoders' output can drive 10 low power Schottky TTL equivalent loads and are functionally and pin equivalent to Low input current: 1 A maximum TTL input compatible Typical propagation delay: 20 ns Low quiescent current: 80 A maximum (74HCT Series) Fanout of 10 LS-TTL loads Ordering Code: Order Number MM74HCT138M MM74HCT138SJ MM74HCT138MTC MM74HCT138N Package Number Package Description M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Connection Diagram Pin Assignments for DIP, SOIC, SOP and TSSOP (c) 1999 Fairchild Semiconductor Corporation DS005362.prf www.fairchildsemi.com MM74HCT138 3-to-8 Line Decoder February 1984 MM74HCT138 Truth Table Inputs Outputs Enable Select G1 G2 (Note 1) C B A Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 X H X X X H H H H H H H H L X X X X H H H H H H H H H L L L L L H H H H H H H H L L L H H L H H H H H H H L L H L H H L H H H H H H L L H H H H H L H H H H H L H L L H H H H L H H H H L H L H H H H H H L H H H L H H L H H H H H H L H H L H H H H H H H H H H L H = HIGH Level L = LOW Level X = Don't Care Note 1: G2 = G2A + G2B Logic Diagram www.fairchildsemi.com 2 Recommended Operating Conditions -0.5 to +7.0V Supply Voltage (VCC) DC Input Voltage (VIN) -1.5 to VCC +1.5V DC Output Voltage (VOUT) -0.5 to VCC +0.5V Clamp Diode Current (IIK, IOK) 20 mA DC Output Current, per pin (IOUT) 25 mA Supply Voltage (VCC) (VIN, VOUT) Operating Temperature Range (TA) 600 mW 500 mW 0 VCC V -40 +85 C 500 ns Note 2: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Note 3: Unless otherwise specified all voltages are referenced to ground. Note 4: Power Dissipation temperature derating -- plastic "N" package: - 12 mW/C from 65C to 85C. Lead Temperature (TL) (Soldering 10 seconds) V (tr, tf) Power Dissipation (PD) S.O. Package only Units 5.5 Input Rise or Fall Times -65C to +150C (Note 4) Max 4.5 DC Input or Output Voltage 50 mA DC VCC or GND Current, per pin (ICC) Storage Temperature Range (TSTG) Min 260C DC Electrical Characteristics VCC = 5V 10% (unless otherwise specified) Symbol VIH Parameter TA = 25C Conditions Typ Minimum HIGH Level TA = -40 to 85C TA = -55 to 125C Guaranteed Limits Units 2.0 2.0 2.0 V 0.8 0.8 0.8 V Input Voltage VIL Maximum LOW Level Input Voltage VOH VOL IIN ICC Minimum HIGH Level VIN = VIH or VIL Output Voltage |IOUT| = 20 A VCC VCC- 0.1 VCC- 0.1 VCC- 0.1 V |IOUT| = 4.0 mA, VCC = 4.5V 4.2 3.98 3.84 3.7 V |IOUT| = 4.8 mA, VCC = 5.5V 5.2 4.98 4.84 4.7 V Maximum LOW Level VIN = VIH or VIL Voltage |IOUT| = 20 A Maximum Input 0 0.1 0.1 0.1 V |IOUT| = 4.0 mA, VCC = 4.5V 0.2 0.26 0.33 0.4 V |IOUT| = 4.8 mA, VCC = 5.5V 0.2 0.26 0.33 0.4 V 0.1 1.0 1.0 A 8.0 80 160 A 0.3 0.4 0.5 mA VIN = VCC or GND, Current VIH or VIL Maximum Quiescent VIN = VCC or GND Supply Current IOUT = 0 A VIN = 2.4V or 0.5V (Note 5) Note 5: This is measured per input pin. All other inputs are held at VCC or ground. 3 www.fairchildsemi.com MM74HCT138 Absolute Maximum Ratings(Note 2) (Note 3) MM74HCT138 AC Electrical Characteristics TA = 25C, VCC = 5.0V, tr = tf = 6 ns, CL = 15 pF (unless otherwise specified) Symbol Parameter Conditions Typ Guaranteed Limit Units tPHL Maximum Propagation Delay, A, B, or C to Output 20 35 ns tPLH Maximum Propagation Delay, A, B, or C to Output 13 25 ns tPHL Maximum Propagation Delay, G1 to Y Output 14 25 ns tPLH Maximum Propagation Delay, G1 to Y Output 13 25 ns tPHL Maximum Propagation Delay, G2A or G2B to Y Output 17 30 ns tPLH Maximum Propagation Delay, G2A or G2B to Y Output 13 25 ns AC Electrical Characteristics VCC = 5V 10%, CL = 50 pF, tr = tf = 6 ns (unless otherwise specified) Symbol tPHL Parameter TA = 25C Conditions Typ Maximum Propagation Delay TA = -40 to 85C TA = -55 to 125C Guaranteed Limits Units 24 40 50 60 ns 18 30 38 45 ns 17 30 38 45 ns 20 30 38 45 ns 23 35 43 52 ns 18 30 38 45 ns 15 19 22 ns 5 10 10 A, B, or C to Output tPLH Maximum Propagation Delay A, B, or C to Output tPHL Maximum Propagation Delay G1 to Y Output tPLH Maximum Propagation Delay G1 to Y Output tPHL Maximum Propagation Delay G2A or G2B to Y Output tPLH Maximum Propagation Delay G2A or G2B to Y Output tTHL, tTLH Maximum Output Rise and Fall Time CIN Input Capacitance CPD Power Dissipation Capacitance 55 (Note 6) Note 6: CPD determines the no load dynamic power consumption, PD = CPD VCC2f + ICC VCC, and the no load dynamic current consumption, IS = CPD VCC f + ICC. www.fairchildsemi.com 4 pF pF MM74HCT138 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 5 www.fairchildsemi.com MM74HCT138 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 www.fairchildsemi.com 6 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. MM74HCT138 3-to-8 Line Decoder Physical Dimensions inches (millimeters) unless otherwise noted (Continued) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com