TC74VCX163245FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCX163245FT 16-Bit Dual Supply Bus Transceiver The TC74VCX163245FT is a dual supply, advanced high-speed CMOS 16-bit dual supply voltage interface bus transceiver fabricated with silicon gate CMOS technology. It is also designed with over voltage tolerant inputs and outputs up to 3.6 V. Designed for use as an interface between a 1.8-V or 2.5-V bus and a 2.5-V or 3.6-V bus in mixed 1.8-V or 2.5-V/2.5-V or 3.6-V supply systems. The B-port interfaces with the 1.8-V or 2.5-V bus, the A-port with the 2.5-V or 3.6-V bus. Weight: 0.25 g (typ.) The direction of data transmission is determined by the level of the DIR input. The enable input (OE) can be used to disable the device so that the buses are effectively isolated. All inputs are equipped with protection circuits against static discharge or transient excess voltage. Features (Note) * Bidirectional interface between 1.8-V and 2.5 V, 1.8-V and 3.6-V or 2.5 V and 3.6-V buses * High-speed operation: tpd = 7.0 ns (max) (VCCB = 1.8 0.15 V, VCCA = 2.5 0.2 V) : tpd = 7.1 ns (max) (VCCB = 1.8 0.15 V, VCCA = 3.3 0.3 V) : tpd = 4.6 ns (max) (VCCB = 2.5 0.2 V, VCCA = 3.3 0.3 V) * Output current: IOH/IOL = 24 mA (min) (VCC = 3.0 V) : IOH/IOL = 18 mA (min) (VCC = 2.3 V) : IOH/IOL = 6 mA (min) (VCC = 1.65 V) * Latch-up performance: -300 mA * ESD performance: Machine model 200 V Human body model 2000 V * Package: TSSOP * 3.6-V tolerant function and power-down protection provided on all inputs and outputs Note: Do not apply a signal to any bus pins when it is in the output mode. Damage may result. All floating (high impedance) bus pins must have their input level fixed by means of pull-up or pull-down resistors. Start of commercial production 2001-04 1 2014-03-01 TC74VCX163245FT Pin Assignment (top view) IEC Logic Symbol 1DIR 1 48 1OE 1B1 2 47 1A1 1B2 3 46 1A2 GND 4 45 GND 1B3 5 44 1A3 1B4 6 43 1A4 VCCB 7 42 VCCA 1B5 8 41 1A5 1B6 9 40 1A6 GND 10 39 GND 1B7 11 38 1A7 1B8 12 37 1A8 2B1 13 36 2A1 2B2 14 35 2A2 GND 15 34 GND 2B3 16 33 2A3 2B4 17 32 2A4 VCCB 18 31 VCCA 2B5 19 30 2A5 2B6 20 29 2A6 GND 21 28 GND 2B7 22 27 2A7 2B8 23 26 2A8 2DIR 24 25 2OE 1OE 1DIR 2OE 2DIR 1A1 1A2 1A3 1A4 1A5 1A6 1A7 1A8 2A1 2A2 2A3 2A4 2A5 2A6 2A7 2A8 2 48 1 25 24 47 46 44 43 41 40 38 37 36 35 33 32 30 29 27 26 G3 3 EN1 (BA) 3 EN2 (AB) G6 6 EN4 (BA) 6 EN5 (AB) 2 1 2 4 5 1B1 3 5 6 8 9 11 12 13 1B2 1B3 1B4 1B5 1B6 1B7 1B8 2B1 14 16 17 19 20 22 23 2B2 2B3 2B4 2B5 2B6 2B7 2B8 2014-03-01 TC74VCX163245FT Truth Table Inputs Function 1OE 1DIR Bus 1A1-1A8 Bus 1B1-1B8 Outputs L L Output Input A=B L H Input Output B=A H X Z Inputs Z Function 2OE 2DIR Bus 2A1-2A8 Bus 2B1-2B8 Outputs L L Output Input A=B L H Input Output B=A H X Z Z X: Don't care Z: High impedance 3 2014-03-01 TC74VCX163245FT Block Diagram VCCB 1DIR VCCA Logic level converter 1OE 1B1 1B8 1A1 Same as above block VCCB 2DIR 2OE VCCA Logic level converter 2B1 2B8 1A8 2A1 Same as above block 4 2A8 2014-03-01 TC74VCX163245FT Absolute Maximum Ratings (Note 1) Characteristics Power supply voltage (Note 2) DC input voltage (DIR, OE ) Symbol Rating VCCB -0.5 to 4.6 VCCA -0.5 to 4.6 VIN -0.5 to 4.6 Unit V V -0.5 to 4.6 (Note 3) VI/OB -0.5 to VCCB + 0.5 (Note 4) DC bus I/O voltage V -0.5 to 4.6 (Note 3) VI/OA -0.5 to VCCA + 0.5 (Note 4) IIK -50 II/OK 50 IOUTB 50 IOUTA 50 ICCB 100 ICCA 100 Power dissipation PD 400 mW Storage temperature Tstg -65 to 150 C Input diode current Output diode current DC output current DC VCC/ground current per supply pin mA (Note 5) mA mA mA Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Don't supply a voltage to VCCA terminal when VCCB is in the off-state. Note 3: Output in OFF state Note 4: High or low state. IOUT absolute maximum rating must be observed. Note 5: VOUT < GND, VOUT > VCC 5 2014-03-01 TC74VCX163245FT Operating Ranges (Note 1) Characteristics Power supply voltage (Note 2) Input voltage (DIR, OE ) Symbol Rating VCCB 1.65 to 2.7 VCCA 2.3 to 3.6 VIN 0 to 3.6 0 to 3.6 VI/OB Unit V V (Note 3) 0 to VCCB (Note 4) Bus I/O voltage 0 to 3.6 VI/OA (Note 3) V 0 to VCCA (Note 4) IOUTB Output current IOUTA 18 (Note 5) 6 (Note 6) 24 (Note 7) 18 (Note 8) Operating temperature Topr -40 to 85 Input rise and fall time dt/dv 0 to 10 mA C (Note 9) ns/V Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs and bus inputs must be tied to either VCC or GND. Please connect both bus inputs and the bus outputs with VCC or GND when the I/O of the bus terminal changes by the function. In this case, please note that the output is not short-circuited. Note 2: Don't use in VCCB > VCCA. Note 3: Output in OFF state Note 4: High or low state Note 5: VCCB = 2.3 to 2.7 V Note 6: VCCB = 1.65 to 1.95 V Note 7: VCCA = 3.0 to 3.6 V Note 8: VCCA = 2.3 to 2.7 V Note 9: VIN = 0.8 to 2.0 V, VCCB = 2.5 V, VCCA = 3.0 V 6 2014-03-01 TC74VCX163245FT Electrical Characteristics DC Characteristics (VCCB = 1.8 0.15 V, VCCA = 2.5 0.2 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 1.8 0.15 2.5 0.2 0.65 x VCC VIHA An 1.8 0.15 2.5 0.2 1.6 VILB DIR, OE , Bn 1.8 0.15 2.5 0.2 0.35 x VCC VILA An 1.8 0.15 2.5 0.2 0.7 IOHB = -100 A 1.8 0.15 2.5 0.2 VCCB - 0.2 IOHB = -6 mA 2.5 0.2 1.25 2.5 0.2 VCCA - 0.2 VIN = VIH or VIL VOLB VIN = VIH or VIL L-level output voltage VOLA 1.65 IOHA = -100 A 1.8 0.15 VOHA IOHA = -18 mA 1.8 0.15 2.3 1.7 IOLB = 100 A 1.8 0.15 2.5 0.2 0.2 1.65 2.5 0.2 0.3 IOLA = 100 A 1.8 0.15 2.5 0.2 0.2 IOLA = 18 mA 1.8 0.15 2.3 0.6 IOLB = 6 mA Unit V V V V IOZB VIN = VIH or VIL VOUT = 0 to 3.6 V 1.8 0.15 2.5 0.2 10 IOZA VIN = VIH or VIL VOUT = 0 to 3.6 V 1.8 0.15 2.5 0.2 10 VIN (DIR, OE ) = 0 to 3.6 V 1.8 0.15 2.5 0.2 5.0 A A 3-state output OFF state current Quiescent supply current Ta = -40 to 85C DIR, OE , Bn H-level output voltage Power-off leakage current VCCA (V) VIHB VOHB Input leakage current VCCB (V) IIN A IOFF VIN, VOUT = 0 to 3.6 V 0 0 10 ICCB VINA = VCCA or GND VINB = VCCB or GND 1.8 0.15 2.5 0.2 20 ICCA VINA = VCCA or GND VINB = VCCB or GND 1.8 0.15 2.5 0.2 20 ICCB VCCB < (VIN, VOUT) 3.6 V 1.8 0.15 2.5 0.2 20 ICCA VCCA (VIN, VOUT) 3.6 V 1.8 0.15 2.5 0.2 20 ICCTB VINB = VCCB - 0.6 V per input 1.8 0.15 2.5 0.2 750 A ICCTA VINA = VCCA - 0.6 V per input 1.8 0.15 2.5 0.2 750 A 7 A A 2014-03-01 TC74VCX163245FT DC Characteristics (VCCB = 1.8 0.15 V, VCCA = 3.3 0.3 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 1.8 0.15 3.3 0.3 0.65 x VCC VIHA An 1.8 0.15 3.3 0.3 2.0 VILB DIR, OE , Bn 1.8 0.15 3.3 0.3 0.35 x VCC VILA An 1.8 0.15 3.3 0.3 0.8 IOHB = -100 A 1.8 0.15 3.3 0.3 VCCB - 0.2 IOHB = -6 mA 3.3 0.3 1.25 3.3 0.3 VCCA - 0.2 VIN = VIH or VIL VOLB VIN = VIH or VIL L-level output voltage VOLA 1.65 IOHA = -100 A 1.8 0.15 VOHA IOHA = -24 mA 1.8 0.15 3.0 2.2 IOLB = 100 A 1.8 0.15 3.3 0.3 0.2 1.65 3.3 0.3 0.3 IOLA = 100 A 1.8 0.15 3.3 0.3 0.2 IOLA = 24 mA 1.8 0.15 3.0 0.55 IOLB = 6 mA Unit V V V V IOZB VIN = VIH or VIL VOUT = 0 to 3.6 V 1.8 0.15 3.3 0.3 10 IOZA VIN = VIH or VIL VOUT = 0 to 3.6 V 1.8 0.15 3.3 0.3 10 VIN (DIR, OE ) = 0 to 3.6 V 1.8 0.15 3.3 0.3 5.0 A A 3-state output OFF state current Quiescent supply current Ta = -40 to 85C DIR, OE , Bn H-level output voltage Power-off leakage current VCCA (V) VIHB VOHB Input leakage current VCCB (V) IIN A IOFF VIN, VOUT = 0 to 3.6 V 0 0 10 ICCB VINA = VCCA or GND VINB = VCCB or GND 1.8 0.15 3.3 0.3 20 ICCA VINA = VCCA or GND VINB = VCCB or GND 1.8 0.15 3.3 0.3 20 ICCB VCCB < (VIN, VOUT) 3.6 V 1.8 0.15 3.3 0.3 20 ICCA VCCA (VIN, VOUT) 3.6 V 1.8 0.15 3.3 0.3 20 ICCTB VINB = VCCB - 0.6 V per input 1.8 0.15 3.3 0.3 750 A ICCTA VINA = VCCA - 0.6 V per input 1.8 0.15 3.3 0.3 750 A 8 A A 2014-03-01 TC74VCX163245FT DC Characteristics (VCCB = 2.5 0.2 V, VCCA = 3.3 0.3 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 2.5 0.2 3.3 0.3 1.6 VIHA An 2.5 0.2 3.3 0.3 2.0 VILB DIR, OE , Bn 2.5 0.2 3.3 0.3 0.7 VILA An 2.5 0.2 3.3 0.3 0.8 IOHB = -100 A 2.5 0.2 3.3 0.3 VCCB - 0.2 IOHB = -18 mA 2.3 3.3 0.3 1.7 VIN = VIH or VIL VOHA VOLB VIN = VIH or VIL L-level output voltage VOLA IOHA = -100 A 2.5 0.2 3.3 0.3 VCCA - 0.2 IOHA = -24 mA 2.5 0.2 3.0 2.2 IOLB = 100 A 2.5 0.2 3.3 0.3 0.2 IOLB = 18 mA 2.3 3.3 0.3 0.6 IOLA = 100 A 2.5 0.2 3.3 0.3 0.2 IOLA = 24 mA 2.5 0.2 3.0 0.55 3.3 0.3 10 Unit V V V V IOZB VIN = VIH or VIL VOUT = 0 to 3.6 V 2.5 0.2 IOZA VIN = VIH or VIL VOUT = 0 to 3.6 V 2.5 0.2 3.3 0.3 10 VIN (DIR, OE ) = 0 to 3.6 V 2.5 0.2 3.3 0.3 5.0 A A 3-state output OFF state current Quiescent supply current Ta = -40 to 85C DIR, OE , Bn H-level output voltage Power-off leakage current VCCA (V) VIHB VOHB Input leakage current VCCB (V) IIN A IOFF VIN, VOUT = 0 to 3.6 V 0 0 10 ICCB VINA = VCCA or GND VINB = VCCB or GND 2.5 0.2 3.3 0.3 20 ICCA VINA = VCCA or GND VINB = VCCB or GND 2.5 0.2 3.3 0.3 20 ICCB VCCB < (VIN, VOUT) 3.6 V 2.5 0.2 3.3 0.3 20 ICCA VCCA (VIN, VOUT) 3.6 V 2.5 0.2 3.3 0.3 20 ICCTB VINB = VCCB - 0.6 V per input 2.5 0.2 3.3 0.3 750 A ICCTA VINA = VCCA - 0.6 V per input 2.5 0.2 3.3 0.3 750 A 9 A A 2014-03-01 TC74VCX163245FT AC Characteristics (Ta = -40 to 85C, Input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 ) VCCB = 1.8 0.15 V, VCCA = 2.5 0.2 V Characteristics Propagation delay time Symbol tpLH (Bn An) tpHL 3-state output enable time tpZL ( OE An) 3-state output disable time ( OE An) Propagation delay time tpZH tpLZ tpHZ tpLH (An Bn) tpHL 3-state output enable time tpZL ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Note: tpZH tpLZ tpHZ Test Condition Min Max Figure 1, Figure 2 0.8 5.8 Figure 1, Figure 3 0.8 6.9 Figure 1, Figure 3 0.8 6.4 Figure 1, Figure 2 1.5 7.0 Figure 1, Figure 3 1.5 11.0 Figure 1, Figure 3 0.8 7.0 0.5 ns Min Max Unit Figure 1, Figure 2 0.6 5.5 Figure 1, Figure 3 0.6 6.9 Figure 1, Figure 3 0.6 7.1 Figure 1, Figure 2 1.5 7.1 Figure 1, Figure 3 1.5 10.3 Figure 1, Figure 3 0.8 7.1 0.5 tosLH (Note) tosHL Unit ns ns Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) VCCB = 1.8 0.15 V, VCCA = 3.3 0.3 V Characteristics Propagation delay time Symbol tpLH (Bn An) tpHL 3-state output enable time tpZL ( OE An) 3-state output disable time ( OE An) Propagation delay time tpZH tpLZ tpHZ tpLH (An Bn) tpHL 3-state output enable time tpZL ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Note: tpZH tpLZ tpHZ Test Condition tosLH (Note) tosHL ns ns ns Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 10 2014-03-01 TC74VCX163245FT VCCB = 2.5 0.2 V, VCCA = 3.3 0.3 V Characteristics Symbol Propagation delay time tpLH (Bn An) tpHL 3-state output enable time tpZL ( OE An) tpZH 3-state output disable time tpLZ ( OE An) tpHZ Propagation delay time tpLH (An Bn) tpHL 3-state output enable time tpZL ( OE Bn) tpZH 3-state output disable time tpLZ ( OE Bn) tpHZ Min Max Figure 1, Figure 2 0.6 4.4 Figure 1, Figure 3 0.6 4.8 Figure 1, Figure 3 0.6 4.9 Figure 1, Figure 2 0.8 4.6 Figure 1, Figure 3 0.8 6.2 Figure 1, Figure 3 0.8 4.9 0.5 tosLH Output to output skew Note: Test Condition (Note) tosHL Unit ns ns ns Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) Dynamic Switching Characteristics (Ta = 25C, Input: tr = tf = 2.0 ns, CL = 30 pF) Characteristics Test Condition Symbol VCCB (V) VCCA (V) BA Quiet output maximum dynamic VOL VOLP VIH = VCC, VIL = 0 V AB BA Quiet output minimum dynamic VOL VOLV VIH = VCC, VIL = 0 V AB BA Quiet output minimum dynamic VOH VOHV VIH = VCC, VIL = 0 V AB 11 Typ. 1.8 2.5 0.25 1.8 3.3 0.25 2.5 3.3 0.6 1.8 2.5 0.6 1.8 3.3 0.8 2.5 3.3 0.8 1.8 2.5 -0.25 1.8 3.3 -0.25 2.5 3.3 -0.6 1.8 2.5 -0.6 1.8 3.3 -0.8 2.5 3.3 -0.8 1.8 2.5 1.3 1.8 3.3 1.3 2.5 3.3 1.7 1.8 2.5 1.7 1.8 3.3 2.0 2.5 3.3 2.0 Unit V V V 2014-03-01 TC74VCX163245FT Capacitive Characteristics (Ta = 25C) Symbol Test Circuit Input capacitance CIN DIR, OE 2.5 Output capacitance CI/O An, Bn 2.5 CPDA Characteristics Power dissipation capacitance (Note) Note: CPDB Test Condition Typ. Unit 3.3 7 pF 3.3 8 pF VCCB (V) VCCA (V) A B (DIR = "H") 2.5 3.3 2 B A (DIR = "L") 2.5 3.3 23 A B (DIR = "H") 2.5 3.3 26 B A (DIR = "L") 2.5 3.3 2 pF CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/16 (per bit) 12 2014-03-01 TC74VCX163245FT AC Test Circuit 6.0 V or VCC x 2 Open GND RL Switch RL Measure CL Output Parameter Switch tpLH, tpHL Open 6.0 V VCC x 2 tpLZ, tpZL CL = 30 pF RL = 500 tpHZ, tpZH @VCC = 3.3 0.3 V @VCC = 2.5 0.2 V @VCC = 1.8 0.15 V GND Figure 1 AC Waveform tr 2.0 ns tf 2.0 ns 90% VM Input (An, Bn) VIH 10% GND VOH Output (Bn, An) VM VOL tpHL tpLH Figure 2 tpLH, tpHL tr 2.0 ns tf 2.0 ns 90% VM Output Enable Control ( OE ) VIH 10% tpLZ GND tpZL 3.0 V or VCC Output (An, Bn) Low to Off to Low VM tpHZ VX VOH VY Output (An, Bn) High to Off to High VOL tpZH VM GND Outputs enabled Outputs enabled Outputs disabled Figure 3 tpLZ, tpHZ, tpZL, tpZH Symbol VCC 3.3 0.3 V 2.5 0.2 V 1.8 0.15 V VIH 2.7 V VCC VCC VM 1.5 V VCC/2 VCC/2 VX VOL + 0.3 V VOL + 0.15 V VOL + 0.15 V VY VOH - 0.3 V VOH - 0.15 V VOH - 0.15 V 13 2014-03-01 TC74VCX163245FT Package Dimensions Weight: 0.25 g (typ.) 14 2014-03-01 TC74VCX163245FT RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 15 2014-03-01