TC74VCX163245FT
2014-03-01
1
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VCX163245FT
16-Bit Dual Supply Bus Transceiver
The TC74VCX163245FT is a dual supply, advanced high-speed
CMOS 16-bit dual supply voltage interface bus transceiver fabricated
with silicon gate CMOS technology.
It is also designed with over voltage tolerant inputs and outputs up
to 3.6 V.
Designed for use as an interface between a 1.8-V or 2.5-V bus
and a 2.5-V or 3.6-V bus in mixed 1.8-V or 2.5-V/2.5-V or 3.6-V
supply systems.
The B-port interfaces with the 1.8-V or 2.5-V bus, the A-port with
the 2.5-V or 3.6-V bus.
The direction of data transmission is determined by the level of the
DIR input. The enable input (OE) can be used to disable the device
so that the buses are effectively isolated.
All inputs are equipped with protection circuits against static discharge or transient excess voltage.
Features (Note)
• Bidirectional interface between 1.8-V and 2.5 V, 1.8-V and 3.6-V or 2.5 V and 3.6-V buses
• High-speed operation: tpd = 7.0 ns (max) (VCCB = 1.8 ± 0.15 V, VCCA = 2.5 ± 0.2 V)
: tpd = 7.1 ns (max) (VCCB = 1.8 ± 0.15 V, VCCA = 3.3 ± 0.3 V)
: tpd = 4.6 ns (max) (VCCB = 2.5 ± 0.2 V, VCCA = 3.3 ± 0.3 V)
• Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V)
: IOH/IOL = ±18 mA (min) (VCC = 2.3 V)
: IOH/IOL = ±6 mA (min) (VCC = 1.65 V)
• Latch-up performance: −300 mA
• ESD performance: Machine model ≥ ±200 V
Human body model ≥ ±2000 V
• Package: TSSOP
• 3.6-V tolerant function and power-down protection provided on all inputs and outputs
Note: Do not apply a signal to any bus pins when it is in the output mode. Damage may result.
All floating (high impedance) bus pins must have their input level fixed by means of pull-up or pull-down
resistors.
Weight: 0.25 g (typ.)
Start of commercial production
2001-04
TC74VCX163245FT
2014-03-01
2
Pin Assignment (top view) IEC Logic Symbol
1
2
OE1
1DIR
OE2
2DIR
1A1
1A2
1A3
1A4
1A5
1A6
1A7
1A8
2A1
2A2
2A3
2A4
2A5
2A6
2A7
2A8
48
1
25
24
47
46
44
43
41
40
38
37
36
35
33
32
30
29
27
26
1B1
1B2
1B3
1B4
1B5
1B6
1B7
1B8
2B1
2B2
2B3
2B4
2B5
2B6
2B7
2B8
2
3
5
6
8
9
11
12
13
14
16
17
19
20
22
23
G3
3 EN1 (BA)
3 EN2 (AB)
G6
6 EN4 (BA)
6 EN5 (AB)
4
5
VCCB
OE1
48
1A1
1A2
GND
47
46
45
44
43
42
1DIR 1
2
3
4
5
6
7
GND
1B3
1B4
VCCB
1B5
1B6
1A3
8
9
10
1A5
1A6
GND
41
40
39
1A4
VCCA
GND
1B1
1B2
1A7
38
1A8
2A1
2A2
37
36
35
34
33
32
1B7 11
12
13
14
15
16
17
2B2
GND
2B3
2B4
2B5
GND
18
19
20
VCCA
2A5
2B6
31
30
29
2A3
2A4
2A6
1B8
2B1
28 21
GND
2B7
2B8
22
23
24
2A7
2A8
2DIR
27
26
25
GND
OE2
TC74VCX163245FT
2014-03-01
3
Truth Table
Inputs Function
OE1 1DIR Bus
1A1-1A8
Bus
1B1-1B8
Outputs
L L Output Input A = B
L H Input Output B = A
H X Z Z
Inputs Function
OE2 2DIR Bus
2A1-2A8
Bus
2B1-2B8
Outputs
L L Output Input A = B
L H Input Output B = A
H X Z Z
X: Don’t care
Z: High impedance
TC74VCX163245FT
2014-03-01
4
Block Diagram
VCCB VCCA
1DIR
OE1
1B1
1B8
1A1
1A8
Logic
level
converter
Same as above block
VCCB VCCA
2DIR
OE2
2B1
2B8
2A1
2A8
Logic
level
converter
Same as above block
TC74VCX163245FT
2014-03-01
5
Absolute Maximum Ratings (Note 1)
Characteristics Symbol Rating Unit
VCCB −0.5 to 4.6
Power supply voltage (Note 2)
VCCA −0.5 to 4.6
V
DC input voltage
(DIR, OE ) VIN −0.5 to 4.6 V
−0.5 to 4.6 (Note 3)
VI/OB −0.5 to VCCB + 0.5
(Note 4)
−0.5 to 4.6 (Note 3)
DC bus I/O voltage
VI/OA −0.5 to VCCA + 0.5
(Note 4)
V
Input diode current IIK −50 mA
Output diode current II/OK ±50 (Note 5) mA
IOUTB ±50
DC output current
IOUTA ±50
mA
ICCB ±100
DC VCC/ground current per supply pin
ICCA ±100
mA
Power dissipation PD 400 mW
Storage temperature Tstg −65 to 150 °C
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: Don’t supply a voltage to VCCA terminal when VCCB is in the off-state.
Note 3: Output in OFF state
Note 4: High or low state. IOUT absolute maximum rating must be observed.
Note 5: VOUT < GND, VOUT > VCC
TC74VCX163245FT
2014-03-01
6
Operating Ranges (Note 1)
Characteristics Symbol Rating Unit
VCCB 1.65 to 2.7
Power supply voltage (Note 2)
VCCA 2.3 to 3.6
V
Input voltage
(DIR, OE ) VIN 0 to 3.6 V
0 to 3.6 (Note 3)
VI/OB 0 to VCCB (Note 4)
0 to 3.6 (Note 3)
Bus I/O voltage
VI/OA 0 to VCCA (Note 4)
V
±18 (Note 5)
IOUTB
±6 (Note 6)
±24 (Note 7)
Output current
IOUTA
±18 (Note 8)
mA
Operating temperature Topr −40 to 85 °C
Input rise and fall time dt/dv 0 to 10 (Note 9) ns/V
Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs and
bus inputs must be tied to either VCC or GND. Please connect both bus inputs and the bus outputs with VCC
or GND when the I/O of the bus terminal changes by the function. In this case, please note that the output is
not short-circuited.
Note 2: Don’t use in VCCB > VCCA.
Note 3: Output in OFF state
Note 4: High or low state
Note 5: VCCB = 2.3 to 2.7 V
Note 6: VCCB = 1.65 to 1.95 V
Note 7: VCCA = 3.0 to 3.6 V
Note 8: VCCA = 2.3 to 2.7 V
Note 9: VIN = 0.8 to 2.0 V, VCCB = 2.5 V, VCCA = 3.0 V
TC74VCX163245FT
2014-03-01
7
Electrical Characteristics
DC Characteristics (VCCB = 1.8 ± 0.15 V, VCCA = 2.5 ± 0.2 V)
Ta =
−40 to 85°C
Characteristics Symbol Test Condition VCCB (V) VCCA (V)
Min Max
Unit
VIHB DIR, OE , Bn 1.8 ± 0.15 2.5 ± 0.2 0.65 ×
VCC ⎯
H-level input voltage
VIHA An 1.8 ± 0.15 2.5 ± 0.2 1.6 ⎯
V
VILB DIR, OE , Bn 1.8 ± 0.15 2.5 ± 0.2 ⎯ 0.35 ×
VCC
L-level input voltage
VILA An 1.8 ± 0.15 2.5 ± 0.2 ⎯ 0.7
V
1.8 ± 0.15 2.5 ± 0.2 VCCB
− 0.2 ⎯
VOHB IOHB = −100 μA
IOHB = −6 mA 1.65 2.5
± 0.2 1.25 ⎯
1.8 ± 0.15 2.5 ± 0.2 VCCA
− 0.2 ⎯
H-level output voltage
VOHA
VIN = VIH or VIL
IOHA = −100 μA
IOHA = −18 mA 1.8 ± 0.15 2.3 1.7 ⎯
V
1.8 ± 0.15 2.5 ± 0.2 ⎯ 0.2
VOLB IOLB = 100 μA
IOLB = 6 mA 1.65 2.5
± 0.2 ⎯ 0.3
1.8 ± 0.15 2.5 ± 0.2 ⎯ 0.2
L-level output voltage
VOLA
VIN = VIH or VIL IOLA = 100 μA
IOLA = 18 mA 1.8 ± 0.15 2.3 ⎯ 0.6
V
IOZB VIN = VIH or VIL
VOUT = 0 to 3.6 V 1.8 ± 0.15 2.5 ± 0.2 ⎯ ±10
3-state output OFF state current
IOZA VIN = VIH or VIL
VOUT = 0 to 3.6 V 1.8 ± 0.15 2.5 ± 0.2 ⎯ ±10
μA
Input leakage current IIN VIN (DIR, OE ) = 0 to 3.6 V 1.8 ± 0.15 2.5 ± 0.2 ⎯ ±5.0 μA
Power-off leakage current IOFF VIN, VOUT = 0 to 3.6 V 0 0 ⎯ 10 μA
ICCB VINA = VCCA or GND
VINB = VCCB or GND 1.8 ± 0.15 2.5 ± 0.2 ⎯ 20
ICCA VINA = VCCA or GND
VINB = VCCB or GND 1.8 ± 0.15 2.5 ± 0.2 ⎯ 20
μA
ICCB V
CCB < (VIN, VOUT) ≤ 3.6 V 1.8 ± 0.15 2.5 ± 0.2 ⎯ ±20
ICCA V
CCA ≤ (VIN, VOUT) ≤ 3.6 V 1.8 ± 0.15 2.5 ± 0.2 ⎯ ±20
μA
ICCTB V
INB = VCCB − 0.6 V per input 1.8 ± 0.15 2.5 ± 0.2 ⎯ 750 μA
Quiescent supply current
ICCTA V
INA = VCCA − 0.6 V per input 1.8 ± 0.15 2.5 ± 0.2 ⎯ 750 μA
TC74VCX163245FT
2014-03-01
8
DC Characteristics (VCCB = 1.8 ± 0.15 V, VCCA = 3.3 ± 0.3 V)
Ta =
−40 to 85°C
Characteristics Symbol Test Condition VCCB (V) VCCA (V)
Min Max
Unit
VIHB DIR, OE , Bn 1.8 ± 0.15 3.3 ± 0.3 0.65 ×
VCC ⎯
H-level input voltage
VIHA An 1.8 ± 0.15 3.3 ± 0.3 2.0 ⎯
V
VILB DIR, OE , Bn 1.8 ± 0.15 3.3 ± 0.3 ⎯ 0.35 ×
VCC
L-level input voltage
VILA An 1.8 ± 0.15 3.3 ± 0.3 ⎯ 0.8
V
1.8 ± 0.15 3.3 ± 0.3 VCCB
− 0.2 ⎯
VOHB IOHB = −100 μA
IOHB = −6 mA 1.65 3.3
± 0.3 1.25 ⎯
1.8 ± 0.15 3.3 ± 0.3 VCCA
− 0.2 ⎯
H-level output voltage
VOHA
VIN = VIH or VIL
IOHA = −100 μA
IOHA = −24 mA 1.8 ± 0.15 3.0 2.2 ⎯
V
1.8 ± 0.15 3.3 ± 0.3 ⎯ 0.2
VOLB IOLB = 100 μA
IOLB = 6 mA 1.65 3.3
± 0.3 ⎯ 0.3
1.8 ± 0.15 3.3 ± 0.3 ⎯ 0.2
L-level output voltage
VOLA
VIN = VIH or VIL IOLA = 100 μA
IOLA = 24 mA 1.8 ± 0.15 3.0 ⎯ 0.55
V
IOZB VIN = VIH or VIL
VOUT = 0 to 3.6 V 1.8 ± 0.15 3.3 ± 0.3 ⎯ ±10
3-state output OFF state current
IOZA VIN = VIH or VIL
VOUT = 0 to 3.6 V 1.8 ± 0.15 3.3 ± 0.3 ⎯ ±10
μA
Input leakage current IIN VIN (DIR, OE ) = 0 to 3.6 V 1.8 ± 0.15 3.3 ± 0.3 ⎯ ±5.0 μA
Power-off leakage current IOFF VIN, VOUT = 0 to 3.6 V 0 0 ⎯ 10 μA
ICCB VINA = VCCA or GND
VINB = VCCB or GND 1.8 ± 0.15 3.3 ± 0.3 ⎯ 20
ICCA VINA = VCCA or GND
VINB = VCCB or GND 1.8 ± 0.15 3.3 ± 0.3 ⎯ 20
μA
ICCB V
CCB < (VIN, VOUT) ≤ 3.6 V 1.8 ± 0.15 3.3 ± 0.3 ⎯ ±20
ICCA V
CCA ≤ (VIN, VOUT) ≤ 3.6 V 1.8 ± 0.15 3.3 ± 0.3 ⎯ ±20
μA
ICCTB V
INB = VCCB − 0.6 V per input 1.8 ± 0.15 3.3 ± 0.3 ⎯ 750 μA
Quiescent supply current
ICCTA V
INA = VCCA − 0.6 V per input 1.8 ± 0.15 3.3 ± 0.3 ⎯ 750 μA
TC74VCX163245FT
2014-03-01
9
DC Characteristics (VCCB = 2.5 ± 0.2 V, VCCA = 3.3 ± 0.3 V)
Ta =
−40 to 85°C
Characteristics Symbol Test Condition VCCB (V) VCCA (V)
Min Max
Unit
VIHB DIR, OE , Bn 2.5 ± 0.2 3.3 ± 0.3 1.6 ⎯
H-level input voltage
VIHA An 2.5 ± 0.2 3.3 ± 0.3 2.0 ⎯
V
VILB DIR, OE , Bn 2.5 ± 0.2 3.3 ± 0.3 ⎯ 0.7
L-level input voltage
VILA An 2.5 ± 0.2 3.3 ± 0.3 ⎯ 0.8
V
2.5 ± 0.2 3.3 ± 0.3 VCCB
− 0.2 ⎯
VOHB IOHB = −100 μA
IOHB = −18 mA 2.3 3.3
± 0.3 1.7 ⎯
2.5 ± 0.2 3.3 ± 0.3 VCCA
− 0.2 ⎯
H-level output voltage
VOHA
VIN = VIH or VIL
IOHA = −100 μA
IOHA = −24 mA 2.5 ± 0.2 3.0 2.2 ⎯
V
2.5 ± 0.2 3.3 ± 0.3 ⎯ 0.2
VOLB IOLB = 100 μA
IOLB = 18 mA 2.3 3.3
± 0.3 ⎯ 0.6
2.5 ± 0.2 3.3 ± 0.3 ⎯ 0.2
L-level output voltage
VOLA
VIN = VIH or VIL IOLA = 100 μA
IOLA = 24 mA 2.5 ± 0.2 3.0 ⎯ 0.55
V
IOZB VIN = VIH or VIL
VOUT = 0 to 3.6 V 2.5 ± 0.2 3.3 ± 0.3 ⎯ ±10
3-state output OFF state current
IOZA VIN = VIH or VIL
VOUT = 0 to 3.6 V 2.5 ± 0.2 3.3 ± 0.3 ⎯ ±10
μA
Input leakage current IIN VIN (DIR, OE ) = 0 to 3.6 V 2.5 ± 0.2 3.3 ± 0.3 ⎯ ±5.0 μA
Power-off leakage current IOFF VIN, VOUT = 0 to 3.6 V 0 0 ⎯ 10 μA
ICCB VINA = VCCA or GND
VINB = VCCB or GND 2.5 ± 0.2 3.3 ± 0.3 ⎯ 20
ICCA VINA = VCCA or GND
VINB = VCCB or GND 2.5 ± 0.2 3.3 ± 0.3 ⎯ 20
μA
ICCB V
CCB < (VIN, VOUT) ≤ 3.6 V 2.5 ± 0.2 3.3 ± 0.3 ⎯ ±20
ICCA V
CCA ≤ (VIN, VOUT) ≤ 3.6 V 2.5 ± 0.2 3.3 ± 0.3 ⎯ ±20
μA
ICCTB V
INB = VCCB − 0.6 V per input 2.5 ± 0.2 3.3 ± 0.3 ⎯ 750 μA
Quiescent supply current
ICCTA V
INA = VCCA − 0.6 V per input 2.5 ± 0.2 3.3 ± 0.3 ⎯ 750 μA
TC74VCX163245FT
2014-03-01
10
AC Characteristics (Ta = −40 to 85°C, Input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 Ω)
VCCB = 1.8 ± 0.15 V, VCCA = 2.5 ± 0.2 V
Characteristics Symbol Test Condition Min Max Unit
Propagation delay time
(Bn → An)
tpLH
tpHL
Figure 1, Figure 2 0.8 5.8
3-state output enable time
(OE → An)
tpZL
tpZH
Figure 1, Figure 3 0.8 6.9
3-state output disable time
(OE → An)
tpLZ
tpHZ
Figure 1, Figure 3 0.8 6.4
ns
Propagation delay time
(An → Bn)
tpLH
tpHL
Figure 1, Figure 2 1.5 7.0
3-state output enable time
(OE → Bn)
tpZL
tpZH
Figure 1, Figure 3 1.5 11.0
3-state output disable time
(OE → Bn)
tpLZ
tpHZ
Figure 1, Figure 3 0.8 7.0
ns
Output to output skew tosLH
tosHL (Note) ⎯ 0.5 ns
Note: Parameter guaranteed by design.
(tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|)
VCCB = 1.8 ± 0.15 V, VCCA = 3.3 ± 0.3 V
Characteristics Symbol Test Condition Min Max Unit
Propagation delay time
(Bn → An)
tpLH
tpHL
Figure 1, Figure 2 0.6 5.5
3-state output enable time
(OE → An)
tpZL
tpZH
Figure 1, Figure 3 0.6 6.9
3-state output disable time
(OE → An)
tpLZ
tpHZ
Figure 1, Figure 3 0.6 7.1
ns
Propagation delay time
(An → Bn)
tpLH
tpHL
Figure 1, Figure 2 1.5 7.1
3-state output enable time
(OE → Bn)
tpZL
tpZH
Figure 1, Figure 3 1.5 10.3
3-state output disable time
(OE → Bn)
tpLZ
tpHZ
Figure 1, Figure 3 0.8 7.1
ns
Output to output skew tosLH
tosHL (Note) ⎯ 0.5 ns
Note: Parameter guaranteed by design.
(tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|)
TC74VCX163245FT
2014-03-01
11
VCCB = 2.5 ± 0.2 V, VCCA = 3.3 ± 0.3 V
Characteristics Symbol Test Condition Min Max Unit
Propagation delay time
(Bn → An)
tpLH
tpHL
Figure 1, Figure 2 0.6 4.4
3-state output enable time
(OE → An)
tpZL
tpZH
Figure 1, Figure 3 0.6 4.8
3-state output disable time
(OE → An)
tpLZ
tpHZ
Figure 1, Figure 3 0.6 4.9
ns
Propagation delay time
(An → Bn)
tpLH
tpHL
Figure 1, Figure 2 0.8 4.6
3-state output enable time
(OE → Bn)
tpZL
tpZH
Figure 1, Figure 3 0.8 6.2
3-state output disable time
(OE → Bn)
tpLZ
tpHZ
Figure 1, Figure 3 0.8 4.9
ns
Output to output skew tosLH
tosHL (Note) ⎯ 0.5 ns
Note: Parameter guaranteed by design.
(tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|)
Dynamic Switching Characteristics (Ta = 25°C, Input: tr = tf = 2.0 ns, CL = 30 pF)
Characteristics Symbol Test Condition
VCCB (V) VCCA (V)
Typ. Unit
1.8 2.5 0.25
1.8 3.3 0.25
B → A
2.5 3.3 0.6
1.8 2.5 0.6
1.8 3.3 0.8
Quiet output maximum
dynamic VOL
A → B
VOLP V
IH = VCC, VIL = 0 V
2.5 3.3 0.8
V
1.8 2.5 −0.25
1.8 3.3 −0.25
B → A
2.5 3.3
−0.6
1.8 2.5 −0.6
1.8 3.3 −0.8
Quiet output minimum
dynamic VOL
A → B
VOLV V
IH = VCC, VIL = 0 V
2.5 3.3
−0.8
V
1.8 2.5 1.3
1.8 3.3 1.3
B → A
2.5 3.3 1.7
1.8 2.5 1.7
1.8 3.3 2.0
Quiet output minimum
dynamic VOH
A → B
VOHV V
IH = VCC, VIL = 0 V
2.5 3.3 2.0
V
TC74VCX163245FT
2014-03-01
12
Capacitive Characteristics (Ta = 25°C)
Characteristics Symbol
Test
Circuit Test Condition
VCCB (V) VCCA (V)
Typ. Unit
Input capacitance CIN ⎯ DIR, OE 2.5 3.3 7 pF
Output capacitance CI/O ⎯ An, Bn 2.5 3.3 8 pF
A ⇒ B (DIR = “H”) 2.5 3.3 2
CPDA ⎯
B ⇒ A (DIR = “L”) 2.5 3.3 23
A ⇒ B (DIR = “H”) 2.5 3.3 26
Power dissipation capacitance
(Note)
CPDB ⎯
B ⇒ A (DIR = “L”) 2.5 3.3 2
pF
Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
I
CC (opr) = CPD･VCC･fIN + ICC/16 (per bit)
TC74VCX163245FT
2014-03-01
13
AC Test Circuit
AC Waveform
Figure 1
Parameter Switch
tpLH, tpHL Open
tpLZ, tpZL
6.0 V @VCC = 3.3 ± 0.3 V
VCC × 2 @VCC = 2.5 ± 0.2 V
@VCC = 1.8 ± 0.15 V
tpHZ, tpZH GND
6.0 V or VCC × 2
Open
GND
Switch
Output Measure
CL = 30 pF
RL = 500 Ω
RL RL
CL
Figure 2 tpLH, tpHL
90%
10%
Output
(Bn, An)
Input
(An, Bn)
VOL
VOH
VIH
VM
tpLH tpHL
tr 2.0 ns
VM
GND
tf 2.0 ns
VCC
Symbol
3.3 ± 0.3 V 2.5 ± 0.2 V 1.8 ± 0.15 V
VIH 2.7 V VCC V
CC
VM 1.5 V VCC/2 VCC/2
VX V
OL + 0.3 V VOL + 0.15 V VOL + 0.15 V
VY V
OH − 0.3 V VOH − 0.15 V VOH − 0.15 V
Figure 3 tpLZ, tpHZ, tpZL, tpZH
90%
10%
VOL
3.0 V or VCC
GND
VIH
VM
tpHZ t
pZH
tr 2.0 ns
VM
GND
VOH
Outputs
enabled
VM
tpLZ t
pZL
VY
Outputs
disabled
Outputs
enabled
Output Enable
Control ( OE )
Output (An, Bn)
Low to Off to Low
Output (An, Bn)
High to Off to High
VX
tf 2.0 ns
TC74VCX163245FT
2014-03-01
14
Package Dimensions
Weight: 0.25 g (typ.)
TC74VCX163245FT
2014-03-01
15
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
