Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT 3 Typical Applications Features The HMC722LP3E is ideal for: Supports High Data Rates: up to 13 Gbps * RF ATE Applications Differential & Singe-Ended Operation * Broadband Test & Measurement Fast Rise and Fall Times: 19 / 18 ps * Serial Data Transmission up to 13 Gbps Low Power Consumption: 230 mW typ. * Digital Logic Systems up to 13 GHz Programmable Differential Output Voltage Swing: 600 - 1100 mV * NRZ-to-RZ Conversion Propagation Delay: 95 ps Single Supply: -3.3V 16 Lead 3x3 mm SMT Package: 9 mm Functional Diagram General Description The HMC722LP3E is an AND/NAND/OR/NOR function designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC772LP3E may be easily configured to provide any of the following logic functions: AND, NAND, OR and NOR. The HMC722LP3E also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input signals to the HMC722LP3E are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled. The differential outputs of the HMC722LP3E may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohm to ground terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non-ground DC voltage. The HMC722LP3E operates from a single -3.3V DC supply, and is available in a RoHS compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 C, Vee = -3.3V Parameter Conditions Power Supply Voltage Typ. Max -3.6 -3.3 -3.0 Units V Power Supply Current 70 mA Maximum Data Rate 13 Gbps Maximum Clock Rate 13 GHz Input High Voltage -0.5 0.5 V Input Low Voltage -1.0 0.0 V Input Return Loss Output Amplitude Output High Voltage 3-1 Min. Frequency <13 GHz 10 dB Single-Ended, peak-to-peak 550 mVp-p Differential, peak-to-peak 1100 mVp-p -10 mV For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Electrical Specifications, (continued) Conditions Min. Typ. Max Units -570 Output Rise / Fall Time mV Differential, 20% - 80% 19 / 18 ps Frequency <13 GHz 10 dB 27 dB Output Return Loss Small Signal Gain Random Jitter Jr rms 0.2 peak-to-peak, 215 -1 PRBS input [1] Deterministic Jitter, Jd Propagation Delay, td ps rms 2 ps, pp 95 ps [1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output DC Current vs. Supply Voltage Output Differential vs. Supply Voltage [1] [3] [1] [2] 1200 +25C +85C -40C 80 DC CURRENT (mA) DIFFERENTIAL VOLTAGE (mV) 85 75 70 65 60 55 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 SUPPLY VOLTAGE (V) -3 1050 1000 950 900 850 1200 OUTPUT DIFFERENTIAL (mV) 1100 1000 900 800 +25C +85C -40C 500 400 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 VR (V) [1] VR = 0.0V -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 Output Differential vs. Frequency [3] 1300 600 -3.6 SUPPLY VOLTAGE (V) 1200 700 +25C +85C -40C 1100 800 -3.7 -2.9 Output Differential vs. VR [2] DIFFERENTIAL VOLTAGE (mV) 1150 3 HIGH SPEED LOGIC - SMT Parameter Output Low Voltage [2] Frequency = 13 GHz 1100 1000 900 800 700 600 2 4 6 8 10 12 INPUT FREQUENCY (GHz) 14 16 [3] Frequency = 10 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-2 HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Rise / Fall Time vs. Supply Voltage [3] Rise / Fall Time vs. VR [3] 25 23 tr tf 21 RISE/FALL TIME (ps) RISE/FALL TIME (ps) 23 19 17 15 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 21 19 17 15 -1.2 -2.9 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 VR (V) Input Return Loss vs. Frequency Output Return Loss vs. Frequency -10 -15 -15 RETURN LOSS (dB) -10 -20 -25 -30 -35 -20 -25 -30 -35 -40 -40 0 2 4 6 8 10 12 14 FREQUENCY (GHz) [1] VR = 0.0V 3-3 tr tf SUPPLY VOLTAGE (V) RETURN LOSS (dB) HIGH SPEED LOGIC - SMT 3 25 [2] Frequency = 13 GHz 0 2 4 6 8 10 12 14 FREQUENCY (GHz) [3] Frequency = 10 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Eye Diagram 3 HIGH SPEED LOGIC - SMT [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 10 Gbps PN code, Vin = 300mVp-p differential. Timing Diagram Truth Table Input Notes: A = AP - AN B = BP - BN D = DP - DN Outputs A B D L L L L H L H L L H H H H - Positive voltage level L - Negative voltage level For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-4 HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Absolute Maximum Ratings HIGH SPEED LOGIC - SMT 3 Power Supply Voltage (Vee) -3.75V to +0.5V Input Signals -2V to +0.5V Output Signals -1.5V to +1V Storage Temperature -65C to +150C Operating Temperature -40C to +85C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC722LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [3] 722 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 3-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Pin Descriptions Function Description 1, 4, 5, 8, 9, 12 GND Signal Grounds 2, 3 AN, AP Clock / Data Input A 6, 7 BN, BP Clock / Data Input B 10, 11 DP, DN Clock / Data Output 13, 16 GND Supply Ground 14 VR Output level control. Output level may be adjusted by either applying a voltage to VR per "Output Differential vs. VR" plot. 15, Package Base Vee Negative Supply Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3 HIGH SPEED LOGIC - SMT Pin Number 3-6 HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Evaluation PCB HIGH SPEED LOGIC - SMT 3 Item Description J1 AN J2 AP J3 BN J4 BP J5 DP J6 DN J7 Vee J8 VR J9 GND List of Materials for Evaluation PCB 118777 [1] Item Description J1 - J6 PCB Mount SMA RF Connectors J7 - J9 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 4.7 F Capacitor, Tantalum R1 10 Ohm Resistor, 0603 Pkg. U1 HMC722LP3E High Speed Logic, AND / NAND / OR / NOR PCB [2] 118775 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 3-7 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to Vee. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC722LP3E v00.0210 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE Application Circuit HIGH SPEED LOGIC - SMT 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 3-8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC722LP3E HMC722LP3ETR