Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product Information in this Catalog Product information in this catalog is as of October 2019. All of the contents specified herein and production status of the products listed in this catalog are subject to change without notice due to technical improvement of our products, etc. Therefore, please check for the latest information carefully before practical application or use of our products. (4) Powe r g e n e r atio n c o ntro l e quip m e nt (nu c le a r p owe r, hydroelectric power, thermal power plant control system, etc.) (5) Undersea equipment (submarine repeating equipment, underwater work equipment, etc.) (6) Military equipment (7) Any other equipment requiring extremely high levels of safety and/or reliability equal to the equipment listed above Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or equipment incorporating our products, which are caused under the conditions other than those specified in this catalog or individual product specification sheets. *Notes: 1. There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment. 2. Implantable medical devices contain not only internal unit which is implanted in a body, but also external unit which is connected to the internal unit. Approval of Product Specifications Ple a se c ont ac t TA IYO Y UD EN for fur the r det a ils of p ro duc t specifications as the individual product specification sheets are available. When using our products, please be sure to approve our product specifications or make a written agreement on the product specification with TAIYO YUDEN in advance. Pre-Evaluation in the Actual Equipment and Conditions Please conduct validation and verification of our products in actual conditions of mounting and operating environment before using our products. Limited Application 1. Equipment Intended for Use The products listed in this catalog are intended for generalpurpose and standard use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and other equipment specified in this catalog or the individual product specification sheets. TAIYO YUDEN has the line-up of the products intended for use in automotive electronic equipment, telecommunications infrastructure and industrial equipment, or medical devices classified as GHTF Classes A to C (Japan Classes I to III). Therefore, when using our products for these equipment, please check available applications specified in this catalog or the individual product specification sheets and use the corresponding products. 2. Equipment Requiring Inquiry Please be sure to contact TAIYO YUDEN for further information before using the products listed in this catalog for the following equipment (excluding intended equipment as specified in this catalog or the individual product specification sheets) which may cause loss of human life, bodily injury, serious property damage and/or serious public impact due to a failure or defect of the products and/or malfunction attributed thereto. (1) Transportation equipment (automotive powertrain control system, train control system, and ship control system, etc.) (2) Traffic signal equipment (3) Disaster prevention equipment, crime prevention equipment (4) Medical devices classified as GHTF Class C (Japan Class III) (5) H i g h l y p u b l i c i n f o r m a t i o n n e t wo r k e q u i p m e n t , d a t a processing equipment (telephone exchange, and base station, etc.) (6) Any other equipment requiring high levels of quality and/or reliability equal to the equipment listed above 3. Equipment Prohibited for Use Please do not incorporate our products into the following equipment requiring extremely high levels of safety and/or reliability. (1) Aerospace equipment (artificial satellite, rocket, etc.) (2) Aviation equipment *1 (3) Medical devices classified as GHTF Class D (Japan Class IV), implantable medical devices *2 4. Limitation of Liability Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment that is not intended for use by TAIYO YUDEN, or any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. Safety Design When using our products for high safety and/or reliability-required equipment or circuits, please fully perform safety and/or reliability evaluation. In addition, please install (i) systems equipped with a protection circuit and a protection device and/or (ii) systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault for a failsafe design to ensure safety. Intellectual Property Rights Information contained in this catalog is intended to convey examples of typical performances and/or applications of our products and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights. Limited Warranty Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages resulting from a failure or defect in our products. Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in accordance with such agreement. TAIYO YUDEN's Official Sales Channel The contents of this catalog are applicable to our products which are purchased from our sales offices or authorized distributors (hereinafter TAIYO YUDENs official sales channel ). Please note that the contents of this catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN s official sales channel. Caution for Export Some of our products listed in this catalog may require specific procedures for export according to U.S. Export Administration Regulations , Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. 20 for General Electronic Equipment for General Electronic Equipment FBAR/SAW DEVICES for MOBILE COMMUNICATIONS FBAR/SAW DEVICES for MOBILE COMMUNICATIONS REFLOW REFLOW PARTS NUMBER (A) Previous Rule (applied products registered on March 31, 2010 or before.) F A R F 5 Q A 9 1 5 M 0 0 M 2 Family Package code Common sign Product code A K X Common sign Series name Code D5 D6 J5 F5 F6 G5 G6 Product Duplexer Duplexer Triplexer Device Device Dual Devices Dual Devices Frequency RangeMH 700 - 1000 1000 - 5000 700 - 1000 700 - 1000 1000 - 5000 700 - 1000 1000 - 5000 Frequency Common sign Internal code Internal code Custom code Packaging (B) New Rule (applied to products registered on April 1, 2010 or later.) 6 D A 1 G 8 4 2 K 2 C 7 Y HIGH FREQUENCY PRODUCTS D Package code Series name Code Product Frequency RangeMH D5 Duplexer 700 - 1000 D6 Duplexer 1000 - 5000 J5 Triplexer 700 - 1000 F5 Device 700 - 1000 F6 Device 1000 - 5000 G5 Dual Devices 700 - 1000 G6 Dual Devices 1000 - 5000 H6 Triple Devices 1000 - 5000 K6 Quadplexer 1000 - 5000 *For further details, please contact to TAIYO YUDEN CO., LTD. Product code Frequency Internal code Internal code Custom code Packaging EXTERNAL DIMENSIONS 2.0x1.6x0.5 1.8x1.4x0.5Duplexer 1.8+0.0/-0.2 1.4x1.0x0.5 0.5max 1.4+0.0/-0.2 index 4-0.625 4-0.325 4-0.23 4-0.46 0.575 7-0.23 8-0.30 1.1x0.9x0.5 Unitmm 1.8x1.4x0.5Dual Filter 1.5x1.1x0.5 1.500.1 0.5max 1.100.1 index 1.17 0.39 0.39 0.78 0.18 0.18 0.18 0.18 0.21 0.49 0.21 Unitmm sawfilter_e-E08R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 20 145 for General Electronic Equipment PARTS NUMBER Duplexers System Band 1 Band 66 Part number D6DA2G140K2A4 D6DA2G140K2A7 D6PE2G140P3AW D6RB2G140E1AJ D6RB2G140E1AL D6PF1G960M3B6 D6PF1G960M3B9 D6DA1G960K2B1 D6DA1G960K2B2 D6PE1G960P3BY D6PE1G960P3BP D6RB1G960E1HB D6DA1G842K2C4 D6DA1G842K2C7 D6DA2G132K2D4 D6DA2G132K2D9 D6PE2G132P3DWB D6RB2G132E1DF D5DA881M5K2E4 D5RB881M5E1BH D6HL2G655DL06 D6HQ2G655DP01 D6HQ2G655DP02 D6HQ2G655DP03 D6DA2G655K2F1 D6HN2G655BN54 D6HP2G655BP11 D5PF942M5M3G6 D5PF942M5M3G9 D5DA942M5K2G6 D5DA942M5K2S2 D5PE942M5P3GT D5RB942M5E1CF D6DA1G485K2W1 D5DA737M5K2H2 D5PE782M0M3P9 D5DA782M0K2J6 D5DA793M0K2K2 D5PF740M0M3R9 D5DA740M0K2L4 D5FC847M0K3NE D6DA1G503K2Y1 D6PE1G503P3KW D6HQ1G962DP35 D5PF876M5M3U9 D5DA876M5K2P6 D5PE876M5P3UZ D5PF773M0M3Y6 D5FC773M0K3NC D5PF788M0M3Y9 D5FC788M0K3ND D6DA2G155K2T2 Package Sizemm 1.8x1.4x0.5 max. 1.8x1.4x0.5 max. 2.0x1.6x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.47 max. 2.0x1.6x0.57 max. 2.0x1.6x0.57 max. 1.8x1.4x0.57 max. 1.8x1.4x0.57 max. 2.0x1.6x0.57 max. 2.0x1.6x0.57 max. 1.8x1.4x0.6 max. 1.8x1.4x0.6 max. 1.8x1.4x0.38 max. 1.8x1.4x0.5 max. 1.8x1.4x0.5 max. 2.0x1.6x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.47 max. 2.0x1.6x0.54 max. 1.8x1.4x0.54 max. 1.8x1.4x0.54 max. 1.8x1.4x0.54 max. 1.8x1.4x0.44 max. 2.0x1.6x0.54 max. 1.8x1.4x0.54 max. 2.0x1.6x0.5 max. 2.0x1.6x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.6 max. 2.0x1.6x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.44 max. 1.8x1.4x0.5 max. 2.0x1.6x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.44 max. 2.0x1.6x0.5 max. 1.8x1.4x0.5 max. 1.8x1.4x0.44 max. 1.8x1.4x0.44 max. 2.0x1.6x0.5 max. 1.8x1.4x0.57 max. 2.0x1.6x0.5 max. 1.8x1.4x0.6 max. 2.0x1.6x0.5 max. 2.0x1.6x0.5 max. 1.8x1.4x0.44 max. 2.0x1.6x0.5 max. 1.8x1.4x0.44 max. 1.8x1.4x0.44 max. Insertion LossdB AttenuationdB Remarks 1.8/1.8 56/51 1.6/1.7 58/59 1.5/1.6 59/47 Rx : Bal.100ohm 1.7/1.8 57/48 Rx : Bal.100ohm 1.7/1.8 57/51 Rx : Bal.100ohm 2.2/2.7 55/52 2.2/2.7 57/52 1.9/2.5 54/54 1.8/2.3 55/55 2.0/3.1 57/53 Rx : Bal.100ohm 2.3/3.0 56/52 Rx : Bal.100ohm 2.1/2.9 56/55 Rx : Bal.100ohm 2.3/2.1 56/56 1.8/1.9 60/56 1.5/1.7 57/55 1.6/1.8 60/56 1.8/1.8 55/50 Rx : Bal.100ohm 1.6/1.8 62/54 Rx : Bal.100ohm 1.4/1.7 58/59 1.4/1.7 58/52 Rx : Bal.100ohm 2.1/2.3 53/57 FBAR 2.3/2.2 58/57 FBAR 2.0/2.0 58/55 FBAR 2HD Improved 2.0/2.0 61/56 2.1/2.2 50/50 1.8/2.6 55/56 Rx : Bal.100ohm, FBAR WLAN coexistence Ver. 1.8/2.4 56/56 Rx : Bal.100ohm, FBAR 2.1/2.1 57/55 for LTE 1.9/2.2 60/52 1.7/1.8 58/59 1.3/1.5 58/56 for LTE 1.8/2.2 60/55 Rx : Bal.100ohm 1.5/1.9 56/51 Rx : Bal.100ohm 1.2/1.3 58/60 1.65/1.65 63/58 1.6/2.0 64/55 1.9/1.7 58/61 1.2/2.2 50/50 1.6/1.8 61/66 1.25/1.65 65/60 1.8/1.8 55/56 1.3/1.3 60/60 1.6/2.0 55/56 Rx : Bal.100ohm 2.5/2.6 57/57 FBAR 2.0/1.9 56/49 1.3/2.0 60/57 2.2/2.6 60/49 Rx : Bal.100ohm 1.8/2.3 60/53 Block A 2.5/2.6 57/57 1.8/2.4 60/54 Block B 1.8/1.9 63/60 2.0/2.0 57/54 Multiplexers System Part number Package Sizemm Band 13+17 Triplexer J5NA782M0P1H6 2.5x2.0x0.6 max. Band 1+3 Quadplexer K6QZ2G140Q3ZA 2.5x2.0x0.8 max. K6QZ2G140Q3ZC 2.5x2.0x0.8 max. Insertion LossdB AttenuationdB Remarks 1.6/1.9 60/49 1.9/1.9 53/55 1.9/2.0 56/55 1.7/2.3 56/54 2.0/1.9 55/57 2.4/2.3 57/58 Band 2 Band 3 Band 4 Band 5 Band 7 Band 8 HIGH FREQUENCY PRODUCTS Band 11 Band 12 Band 13 Band 14 Band 17 Band 20 Band 21 Band 25 Band 26 Band 28 sawfilter_e-E08R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 146 20 for General Electronic Equipment PARTS NUMBER Package Sizemm 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.44 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.44 max. 1.1x0.9x0.5 max. Insertion LossdB AttenuationdB Remarks 1.8 38 1.9 46 1.7 55 100ohm output 1.7 20 2.8 39 High Att. 2.8 44 100ohm output 2.1 22 2.0 38 3.2 45 100ohm output 1.9 45 High Att. 1.3 51 Low Loss/high Att. 1.5 56 100ohm output 2.5 38 2.5 52 100ohm. High Att. 2.3 18 2.0 48 for LTE 2.2 56 100ohm output 2.2 60 100ohm output for LTE 1.6 53 1.6 55 100ohm output 1.5 56 1.9 50 2.2 49 1.3 33 1.4 65 100ohm output 2.7 41 2.0 52 1.8 23 2.2 49 2.2 59 100ohm output 2.1 52 Block A 2.0 52 Block B 1.6 2.1 50 1.8 1.7 45 1.5 - Part number Package Sizemm Insertion LossdB AttenuationdB Remarks G6QN2G140M2RN 1.5x1.1x0.5 max. TDD Filters TD-SCDMA / TD-LTE System Part number Band 34 TRx F6FC2G017H4PC Band 34 Rx F6QP2G017R2SF Bnad 38 Tx F6KA2G595A4VL Bnad 38 Rx F6QA2G595M2QK F6QB2G595P2BS Band 39 TRx F6FC1G900H4PB Band 39 Rx F6QA1G900M2WD Band 40 Tx F6HH2G350EH75 Band 40 Rx F6QA2G350M2QA F6QB2G350P2BH Band 41 TRx F6KA2G605A4LA Package Sizemm 1.1x0.9x0.44 max. 1.1x0.9x0.5 max. 1.4x1.0x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.44 max. 1.1x0.9x0.5 max. 1.1x0.9x0.44 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.4x1.0x0.5 max. W-CDMA / LTE Dual Filters System Band 3+1 Rx Common Input 40/52 1.1x0.9x0.44 max. F6FC2G595H4PD 1.1x0.9x0.44 max. 1.7 - F6HP2G593AP20 2.0x1.6x0.6 max. 2.9 - F6HQ2G593AP31 1.8x1.4x0.57 max. 2.7 - Package Sizemm 1.5x1.1x0.44 max. 1.8x1.4x0.44 max. For B1+B3 CA Insertion LossdB AttenuationdB Remarks 1.1 Input Power +29dBm (TDD:50% Duty) 1.3 1.5 Input Power+29dBm 1.9 2.0 Balanced 100ohm 1.1 Input power +29dBm (Duty 50%) 1.5 1.4 Input power +30.0dBm TD-LTE 40%duty 5MHz 1RB FBAR 2.2 2.8 Balanced 100ohm 2.4 Unbal High power design 2555-2655MHz BW100MHz Unbal High power design & HPUE 2.1 for CMCC 2535-2655MHz BW120MHz F6FC2G600H4PA TDD Dual Filters TD-SCDMA / TD-LTE System Part number Band 34 + Band 39 TRx G6FT2G017G2YA Band 39 + Band 34 H6FM2G595T2MZ Band 41 (BW120MHz) DRx Band 39 Rx + 41 (BW100MHz) TRx (Common Input) Band 41 Rx + 39 (BW100MHz) DRx (Common Input) Band 41 (BW120MHz) Rx + 39Rx (Common Input) 2.0/1.7 HIGH FREQUENCY PRODUCTS W-CDMA / LTE / CDMA 2000 Filters System Part number Band 1 Tx F6QA1G950M2AA Band 1, Band 4 Rx F6QA2G140M2AM F6QG2G140P2KA Band 2 TxBC1 (PCS) Tx F6QA1G880M2AQ Band 2 RxBC1 (PCS) Rx F6QA1G960M2AP F6QG1G960P2KT Band 3 Tx F6QA1G747M2QS Band 3 Rx F6QA1G842M2AN F6QG1G842P2KD Band 5 TxBC0 Tx F5QA836M5M2AR Band 5 RxBC0 Rx F5QA881M5M2AU F5QG881M5P2KG Band 7 Rx F6QA2G655M2QH F6QG2G655P2KE Band 8 Tx F5QA897M5M2AC Band 8 Rx F5QA942M5M2AW F5QG942M5P2KB F5QG942M5P2KF Band 12 Rx F5QA737M5M2QN F5QG737M5P2KK Band 13 Tx F5QA782M0M2AZ Band 13 Rx F5QA751M0M2QM Band 14 F5QA763M0M2QL Band 17 Tx F5QA710M0M2AY Band 17 Rx F5QG740M0P2KH Band 20 Rx F5QA806M0M2QE Band 21 Rx F6QA1G503M2QF Band 25 Tx F6QA1G882M2AS Band 26 Rx F5QA876M5M2QP F5QG876M5P2KQ Band 28 Rx F5QA773M0M2QC F5QA788M0M2QB Band 29 Rx F5BA722M5M6UW Band 30 Rx F6QP2G355R2SE Band 32 Rx F6QA1G474H2JS Band 66 Rx F6BA2G155M6UU Band 67 Rx F5QA748M0M2WF Unbal Improved IL High power design & HPUE for CMCC 2535-2655MHz BW120MHz Unbal High power design 2496-2690MHz BW194MHz FBAR Unbal High power design & HPUE for Sprint 2496-2690MHz BW194MHz FBAR Insertion LossdB AttenuationdB Remarks 1.3/1.4 1 IN / 3 OUT 1.3/1.4/2.7 - 1 IN / 3 OUT B41 High power design B41 (2555-2655MHz BW100MHz) for CMCC CA G6KJ2G605D4AB 1.8x1.4x0.5 max. 2.1/2.6 - G6QN2G605M2RM 1.5x1.1x0.5 max. 2.2/1.3 - G6QN2G595M2RP 1.5x1.1x0.5 max. 2.3/1.3 - sawfilter_e-E08R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 20 147 for General Electronic Equipment PARTS NUMBER GPS System GPS GPS (GNSS) GPS+GLONASS+Galileo+Compass GNSS L2+L5+B2 Others System ISM900 (B.W.26MHz) Wireless LAN / Bluetooth (R) Part number F6QA1G575H2JF F6QA1G585M2AT F6QB1G585P2BQ F6QA1G581M2QZ F6QA1G582H2JM F6BG1G582R6TT F6FC1G197H4PF Package Sizemm 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.44 max. 1.1x0.9x0.44 max. Insertion LossdB AttenuationdB Remarks 0.96 Low loss, High Att. 1.4 1.7 100ohm output 1.4 1.8 Ladder High Att. 1.7 100ohm output 1.3 - Part number FAR-F5QA-915M00-M2AK F6KA2G436A4VE F6KA2G466A4VJ F6HG2G441EG65 F6HG2G441EG66 F6FC2G441H4PE Package Sizemm 1.1x0.9x0.5 max. 1.4x1.0x0.5 max. 1.4x1.0x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.5 max. 1.1x0.9x0.44 max. Insertion LossdB AttenuationdB Remarks 1.8 2.5 2400-2472MHz,+24dBm 2.5GHz High Att (for MTK) 2.8 2432-2500MHz,+24dBm 2.3GHz High Att (for MTK) 1.3 FBAR 1.3 High Att. @2.38GHz FBAR 1.0 SAW HIGH FREQUENCY PRODUCTS sawfilter_e-E08R01 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 148 20 FBAR/SAW DEVICES for MOBILE COMMUNICATIONS PACKAGING Minimum Quantity Type Duplexer Quadplexer Triplexer Single Filter Dual Filter Size [mm] 2.5x2.0 2.0x1.6 1.8x1.4 2.5x2.0 2.5x2.0 2.0x1.6 1.8x1.4 1.4x1.0 1.1x0.9 1.8x1.4 1.5x1.1 Z Z Z Z Z Z Z Z 3000 3000 3000 3000 3000 3000 3000 3000 Z 3000 Code & Quantity [pcs] U U U J 5000 J 5000 10000 Y Y 15000 15000 Y Y Y Y Y Y 15000 15000 15000 15000 15000 15000 10000 10000 Tape material Taping dimensions Type Duplexer Single Filter Dual Filter Size [mm] 2.5x2.0 2.0x1.6 1.8x1.4 2.0x1.6 1.8x1.4 1.4x1.0 1.1x0.9 1.8x1.4 1.5x1.1 a 2.80.1 2.40.1 2.20.1 2.40.1 2.20.1 1.70.1 1.30.1 2.20.1 1.80.1 b 2.30.1 2.00.1 1.80.1 2.00.1 1.80.1 1.30.1 1.10.1 1.80.1 1.40.1 c 1.5+0.1/0 1.050.05 0.50.05 1.050.05 0.50.05 0.50.05 0.50.05 0.50.05 0.50.05 d 1.5+0.1/0 1.5+0.1/0 1.550.05 1.5+0.1/0 1.550.05 1.5+0.1/0 1.550.05 1.550.05 1.5+0.1/0 e 1.0+0.1/0.0 0.900.05 0.80.1 0.900.05 0.80.1 0.630.05 0.630.05 0.80.1 0.70.1 f 0.250.05 0.250.05 0.300.05 0.250.05 0.300.05 0.200.05 0.200.05 0.300.05 0.250.05 Unitmm Material of TapeConductive Tape : Polystyrene Top cover tape : Polyethylene terephthalatePETand Polyethylene Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E07R01 Reel size Material of Reel Material : PolystyreneCarbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistancereference value :109/sq Max. Code Quantity A Z 3,000 pcs 180.0 +0.0/1.5 J 5,000 pcs 180.0 +0.0/1.5 U 10,000 pcs 330.0 2.0 Y 15,000 pcs 330.0 2.0 B 66.0 0.5 66.0 0.5 100.0 1.0 100.0 1.0 C 13.0 0.2 13.0 0.2 13.0 0.2 13.0 0.2 W1 9.0 +1.0/0.0 9.0 +1.0/0.0 9.4 1.0 9.4 1.0 W2 11.4 1.0 11.4 1.0 13.4 1.0 13.4 1.0 Unitmm Reel label and Reel C-Label sticking and Winding method Surface This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E07R01 FBAR/SAW DEVICES for MOBILE COMMUNICATIONS RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bend width 4mm, hold for 51 sec. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E05R01 10. High Temperature Bias Duplexer only) Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 50, 29dBm, 50000hours. 11. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 12. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 13. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E05R01