D6DA2G132K2D4-Z - TAIYO YUDEN - Datasheet.Directory

REMINDERS

Notice for TAIYO YUDEN products

Please read this notice before using the TAIYO YUDEN products.

■ Product Information in this Catalog

Product information in this catalog is as of October 2019. All of the

contents speciﬁed herein and production status of the products listed

in this catalog are subject to change without notice due to technical

improvement of our products, etc. Therefore, please check for the

latest information carefully before practical application or use of our

products.

Please note that TAIYO YUDEN shall not be in any way responsible

for any damages and defects in products or equipment incorporating

our products, which are caused under the conditions other than those

speciﬁed in this catalog or individual product speciﬁcation sheets.

■ Approval of Product Speciﬁcations

Please contact TAIYO YUDEN for further det a ils of product

specifications as the individual product specification sheets are

available. When using our products, please be sure to approve our

product speciﬁcations or make a written agreement on the product

speciﬁcation with TAIYO YUDEN in advance.

■ Pre-Evaluation in the Actual Equipment and Conditions

Please conduct validation and veriﬁcation of our products in actual

conditions of mounting and operating environment before using our

products.

■ Limited Application

1. Equipment Intended for Use

The pro ducts listed in this c atalog are intended for general-

purpose and standard use in general electronic equipment (e.g.,

AV equipment, OA equipment, home electric appliances, office

equipment, information and communication equipment including,

without limitation, mobile phone, and PC) and other equipment

speciﬁed in this catalog or the individual product speciﬁcation sheets.

TAIYO YUDEN has the line-up of the products intended for

use in automotive electronic equipment, telecommunications

infrastructure and industrial equipment, or medical devices

classified as GHTF Classes A to C (Japan Classes I to III).

Therefore, whe n using our produ cts for these equipment,

please check available applications specified in this catalog

or the individual product specification sheets and use the

corresponding products.

2. Equipment Requiring Inquiry

Please be sure to contact TAIYO YUDEN for further information

before using the products listed in this catalog for the following

equipment (excluding intended equipment as specified in this

catalog or the individual product speciﬁcation sheets) which may

cause loss of human life, bodily injury, serious property damage

and/or serious public impact due to a failure or defect of the

products and/or malfunction attributed thereto.

(1) Transportation equipment (automotive powertrain control

system, train control system, and ship control system, etc.)

(2) Trafﬁc signal equipment

(3) Disaster prevention equipment, crime prevention equipment

(4) Medical devices classiﬁed as GHTF Class C (Japan Class III)

(5) Highly public information network equipment, data-

processing equipment (telephone exchange, and base

station, etc.)

(6) Any other equipment requiring high levels of quality and/or

reliability equal to the equipment listed above

3. Equipment Prohibited for Use

Please do not incorporate our products into the following

equipment requiring extremely high levels of safet y and/or

reliability.

(1) Aerospace equipment (artiﬁcial satellite, rocket, etc.)

(2) Aviation equipment *1

(3) Medical devices classiﬁed as GHTF Class D (Japan Class IV),

implantable medical devices *2

(4) Power generation control equip ment (nuclear power,

hydroelectric power, thermal power plant control system, etc.)

(5) Undersea equipment (submarine repeating equipment,

underwater work equipment, etc.)

(6) Military equipment

(7) Any other equipment requiring extremely high levels of safety

and/or reliability equal to the equipment listed above

*Notes:

1. There is a possibility that our products can be used only

for aviation equipment that does not directly affect the safe

operation of aircraft (e.g., in-flight entertainment, cabin

light, electric seat, cooking equipment) if such use meets

requirements speciﬁed separately by TAIYO YUDEN. Please

be sure to contact TAIYO YUDEN for further information

before using our products for such aviation equipment.

2. Implantable medical devices contain not only internal unit

which is implanted in a body, but also external unit which is

connected to the internal unit.

4. Limitation of Liability

Please note that unless you obtain prior written consent of TAIYO

YUDEN, TAIYO YUDEN shall not be in any way responsible for

any damages incurred by you or third parties arising from use of

the products listed in this catalog for any equipment that is not

intended for use by TAIYO YUDEN, or any equipment requiring

inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN

as described above.

■ Safety Design

When using our products for high safety and/or reliability-required

equipment or circuits, please fully perform safety and/or reliability

evaluation. In addition, please install (i) systems equipped with

a protection circuit and a protection device and/or (ii) systems

equipped with a redundant circuit or other system to prevent an

unsafe status in the event of a single fault for a failsafe design to

ensure safety.

■ Intellectual Property Rights

Information contained in this catalog is intended to convey examples

of typical performances and/or applications of our products and is

not intended to make any warranty with respect to the intellectual

property rights or any other related rights of TAIYO YUDEN or any

third parties nor grant any license under such rights.

■ Limited Warranty

Please note that the scope of warranty for our products is limited to

the delivered our products themselves and TAIYO YUDEN shall not

be in any way responsible for any damages resulting from a failure

or defect in our products. Notwithstanding the foregoing, if there is

a written agreement (e.g., supply and purchase agreement, quality

assurance agreement) signed by TAIYO YUDEN and your company,

TAIYO YUDEN will warrant our products in accordance with such

agreement.

■ TAIYO YUDEN’s Ofﬁcial Sales Channel

The contents of this catalog are applicable to our products which are

purchased from our sales ofﬁces or authorized distributors (hereinafter

TAIYO YUDENs ofﬁcial sales channel). Please note that the contents

of this catalog are not applicable to our products purchased from any

seller other than TAIYO YUDENs ofﬁcial sales channel.

■ Caution for Export

Some of our products listed in this catalog may require specific

procedures for export according to U.S. Export Administration

Regulations, Foreign Exchange and Foreign Trade Control Law

of Japan, and other applicable regulations. Should you have any

questions on this matter, please contact our sales staff.

145

for General Electronic Equipmentfor General Electronic Equipment

sawfilter_e-E08R01

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

REFLOW

■PARTS NUMBER

(A) Previous Rule (applied products registered on March 31, 2010 or before.)

F A R - F 5 Q A - 9 1 5 M 0 0 - M 2 A K - X

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫

①Family

②Common sign

③Series name

Code Product Frequency Range［MHｚ］

D5 Duplexer 700 - 1000

D6 Duplexer 1000 - 5000

J5 Triplexer 700 - 1000

F5 Device 700 - 1000

F6 Device 1000 - 5000

G5 Dual Devices 700 - 1000

G6 Dual Devices 1000 - 5000

④Package code

⑤Product code

⑥Common sign

⑦Frequency

⑧Common sign

⑨Internal code

⑩Internal code

⑪Custom code

⑫Packaging

(B) New Rule (applied to products registered on April 1, 2010 or later.)

D 6 D A 1 G 8 4 2 K 2 C 7 - Y

① ② ③ ④ ⑤ ⑥ ⑦ ⑧

①Series name

Code Product Frequency Range［MHｚ］

D5 Duplexer 700 - 1000

D6 Duplexer 1000 - 5000

J5 Triplexer 700 - 1000

F5 Device 700 - 1000

F6 Device 1000 - 5000

G5 Dual Devices 700 - 1000

G6 Dual Devices 1000 - 5000

H6 Triple Devices 1000 - 5000

K6 Quadplexer 1000 - 5000

*For further details, please contact to TAIYO YUDEN CO., LTD.

②Package code

③Product code

④Frequency

⑤Internal code

⑥Internal code

⑦Custom code

⑧Packaging

■EXTERNAL DIMENSIONS

2.0×1.6×0.5 1.8×1.4×0.5（Duplexer） 1.4×1.0×0.5

1.8+0.0/-0.2

1.4+0.0/-0.2

index

0.5max

4-0.625 4-0.325

4-0.23

7-0.23

8-0.30

4-0.46

0.575

Unit：mm

1.1×0.9×0.5 1.8×1.4×0.5（Dual Filter） 1.5×1.1×0.5

1.50±0.1

1.10±0.1

index

0.5max

0.39

0.18

1.17

Unit：mm

0.18

0.78

0.39

0.18 0.21

0.49

0.21

0.18

▶Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecicationsheets.

 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).

HIGH FREQUENCY

PRODUCTS

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

REFLOW

146

for General Electronic Equipment

■PARTS NUMBER

●Duplexers

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

Band 1 D6DA2G140K2A4 1.8×1.4×0.5 max. 1.8/1.8 56/51

D6DA2G140K2A7 1.8×1.4×0.5 max. 1.6/1.7 58/59

D6PE2G140P3AW 2.0×1.6×0.5 max. 1.5/1.6 59/47 Rx : Bal.100ohm

D6RB2G140E1AJ 1.8×1.4×0.5 max. 1.7/1.8 57/48 Rx : Bal.100ohm

D6RB2G140E1AL 1.8×1.4×0.47 max. 1.7/1.8 57/51 Rx : Bal.100ohm

Band 2 D6PF1G960M3B6 2.0×1.6×0.57 max. 2.2/2.7 55/52

D6PF1G960M3B9 2.0×1.6×0.57 max. 2.2/2.7 57/52

D6DA1G960K2B1 1.8×1.4×0.57 max. 1.9/2.5 54/54

D6DA1G960K2B2 1.8×1.4×0.57 max. 1.8/2.3 55/55

D6PE1G960P3BY 2.0×1.6×0.57 max. 2.0/3.1 57/53 Rx : Bal.100ohm

D6PE1G960P3BP 2.0×1.6×0.57 max. 2.3/3.0 56/52 Rx : Bal.100ohm

D6RB1G960E1HB 1.8×1.4×0.6 max. 2.1/2.9 56/55 Rx : Bal.100ohm

Band 3 D6DA1G842K2C4 1.8×1.4×0.6 max. 2.3/2.1 56/56

D6DA1G842K2C7 1.8×1.4×0.38 max. 1.8/1.9 60/56

Band 4 D6DA2G132K2D4 1.8×1.4×0.5 max. 1.5/1.7 57/55

D6DA2G132K2D9 1.8×1.4×0.5 max. 1.6/1.8 60/56

D6PE2G132P3DWB 2.0×1.6×0.5 max. 1.8/1.8 55/50 Rx : Bal.100ohm

D6RB2G132E1DF 1.8×1.4×0.5 max. 1.6/1.8 62/54 Rx : Bal.100ohm

Band 5 D5DA881M5K2E4 1.8×1.4×0.5 max. 1.4/1.7 58/59

D5RB881M5E1BH 1.8×1.4×0.47 max. 1.4/1.7 58/52 Rx : Bal.100ohm

Band 7 D6HL2G655DL06 2.0×1.6×0.54 max. 2.1/2.3 53/57 FBAR

D6HQ2G655DP01 1.8×1.4×0.54 max. 2.3/2.2 58/57 FBAR

D6HQ2G655DP02 1.8×1.4×0.54 max. 2.0/2.0 58/55 FBAR 2HD Improved

D6HQ2G655DP03 1.8×1.4×0.54 max. 2.0/2.0 61/56

D6DA2G655K2F1 1.8×1.4×0.44 max. 2.1/2.2 50/50

D6HN2G655BN54 2.0×1.6×0.54 max. 1.8/2.6 55/56 Rx : Bal.100ohm, FBAR WLAN coexistence Ver.

D6HP2G655BP11 1.8×1.4×0.54 max. 1.8/2.4 56/56 Rx : Bal.100ohm, FBAR

Band 8 D5PF942M5M3G6 2.0×1.6×0.5 max. 2.1/2.1 57/55 for LTE

D5PF942M5M3G9 2.0×1.6×0.5 max. 1.9/2.2 60/52

D5DA942M5K2G6 1.8×1.4×0.5 max. 1.7/1.8 58/59

D5DA942M5K2S2 1.8×1.4×0.6 max. 1.3/1.5 58/56 for LTE

D5PE942M5P3GT 2.0×1.6×0.5 max. 1.8/2.2 60/55 Rx : Bal.100ohm

D5RB942M5E1CF 1.8×1.4×0.5 max. 1.5/1.9 56/51 Rx : Bal.100ohm

Band 11 D6DA1G485K2W1 1.8×1.4×0.44 max. 1.2/1.3 58/60

Band 12 D5DA737M5K2H2 1.8×1.4×0.5 max. 1.65/1.65 63/58

Band 13 D5PE782M0M3P9 2.0×1.6×0.5 max. 1.6/2.0 64/55

D5DA782M0K2J6 1.8×1.4×0.5 max. 1.9/1.7 58/61

Band 14 D5DA793M0K2K2 1.8×1.4×0.44 max. 1.2/2.2 50/50

Band 17 D5PF740M0M3R9 2.0×1.6×0.5 max. 1.6/1.8 61/66

D5DA740M0K2L4 1.8×1.4×0.5 max. 1.25/1.65 65/60

Band 20 D5FC847M0K3NE 1.8×1.4×0.44 max. 1.8/1.8 55/56

Band 21 D6DA1G503K2Y1 1.8×1.4×0.44 max. 1.3/1.3 60/60

D6PE1G503P3KW 2.0×1.6×0.5 max. 1.6/2.0 55/56 Rx : Bal.100ohm

Band 25 D6HQ1G962DP35 1.8×1.4×0.57 max. 2.5/2.6 57/57 FBAR

Band 26 D5PF876M5M3U9 2.0×1.6×0.5 max. 2.0/1.9 56/49

D5DA876M5K2P6 1.8×1.4×0.6 max. 1.3/2.0 60/57

D5PE876M5P3UZ 2.0×1.6×0.5 max. 2.2/2.6 60/49 Rx : Bal.100ohm

Band 28 D5PF773M0M3Y6 2.0×1.6×0.5 max. 1.8/2.3 60/53 Block A

D5FC773M0K3NC 1.8×1.4×0.44 max. 2.5/2.6 57/57

D5PF788M0M3Y9 2.0×1.6×0.5 max. 1.8/2.4 60/54 Block B

D5FC788M0K3ND 1.8×1.4×0.44 max. 1.8/1.9 63/60

Band 66 D6DA2G155K2T2 1.8×1.4×0.44 max. 2.0/2.0 57/54

●Multiplexers

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

Band 13+17 Triplexer J5NA782M0P1H6 2.5×2.0×0.6 max. 1.6/1.9

1.9/1.9

60/49

53/55

Band 1+3 Quadplexer K6QZ2G140Q3ZA 2.5×2.0×0.8 max. 1.9/2.0

1.7/2.3

56/55

56/54

K6QZ2G140Q3ZC 2.5×2.0×0.8 max. 2.0/1.9

2.4/2.3

55/57

57/58

sawfilter_e-E08R01

 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).

HIGH FREQUENCY

PRODUCTS

147

for General Electronic Equipment

■PARTS NUMBER

●W-CDMA / LTE / CDMA 2000 Filters

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

Band 1 Tx F6QA1G950M2AA 1.1×0.9×0.5 max. 1.8 38

Band 1, Band 4 Rx F6QA2G140M2AM 1.1×0.9×0.5 max. 1.9 46

F6QG2G140P2KA 1.1×0.9×0.5 max. 1.7 55 100ohm output

Band 2 Tx　BC1 (PCS) Tx F6QA1G880M2AQ 1.1×0.9×0.5 max. 1.7 20

Band 2 Rx　BC1 (PCS) Rx F6QA1G960M2AP 1.1×0.9×0.5 max. 2.8 39 High Att.

F6QG1G960P2KT 1.1×0.9×0.5 max. 2.8 44 100ohm output

Band 3 Tx F6QA1G747M2QS 1.1×0.9×0.5 max. 2.1 22

Band 3 Rx F6QA1G842M2AN 1.1×0.9×0.5 max. 2.0 38

F6QG1G842P2KD 1.1×0.9×0.5 max. 3.2 45 100ohm output

Band 5 Tx　BC0 Tx F5QA836M5M2AR 1.1×0.9×0.5 max. 1.9 45 High Att.

Band 5 Rx　BC0 Rx F5QA881M5M2AU 1.1×0.9×0.5 max. 1.3 51 Low Loss/high Att.

F5QG881M5P2KG 1.1×0.9×0.5 max. 1.5 56 100ohm output

Band 7 Rx F6QA2G655M2QH 1.1×0.9×0.5 max. 2.5 38

F6QG2G655P2KE 1.1×0.9×0.5 max. 2.5 52 100ohm. High Att.

Band 8 Tx F5QA897M5M2AC 1.1×0.9×0.5 max. 2.3 18

Band 8 Rx F5QA942M5M2AW 1.1×0.9×0.5 max. 2.0 48 for LTE

F5QG942M5P2KB 1.1×0.9×0.5 max. 2.2 56 100ohm output

F5QG942M5P2KF 1.1×0.9×0.5 max. 2.2 60 100ohm output for LTE

Band 12 Rx F5QA737M5M2QN 1.1×0.9×0.5 max. 1.6 53

F5QG737M5P2KK 1.1×0.9×0.5 max. 1.6 55 100ohm output

Band 13 Tx F5QA782M0M2AZ 1.1×0.9×0.5 max. 1.5 56

Band 13 Rx F5QA751M0M2QM 1.1×0.9×0.5 max. 1.9 50

Band 14 F5QA763M0M2QL 1.1×0.9×0.5 max. 2.2 49

Band 17 Tx F5QA710M0M2AY 1.1×0.9×0.5 max. 1.3 33

Band 17 Rx F5QG740M0P2KH 1.1×0.9×0.5 max. 1.4 65 100ohm output

Band 20 Rx F5QA806M0M2QE 1.1×0.9×0.5 max. 2.7 41

Band 21 Rx F6QA1G503M2QF 1.1×0.9×0.5 max. 2.0 52

Band 25 Tx F6QA1G882M2AS 1.1×0.9×0.5 max. 1.8 23

Band 26 Rx F5QA876M5M2QP 1.1×0.9×0.5 max. 2.2 49

F5QG876M5P2KQ 1.1×0.9×0.5 max. 2.2 59 100ohm output

Band 28 Rx F5QA773M0M2QC 1.1×0.9×0.5 max. 2.1 52 Block A

F5QA788M0M2QB 1.1×0.9×0.5 max. 2.0 52 Block B

Band 29 Rx F5BA722M5M6UW 1.1×0.9×0.44 max. 1.6 -

Band 30 Rx F6QP2G355R2SE 1.1×0.9×0.5 max. 2.1 50

Band 32 Rx F6QA1G474H2JS 1.1×0.9×0.5 max. 1.8 -

Band 66 Rx F6BA2G155M6UU 1.1×0.9×0.44 max. 1.7 45

Band 67 Rx F5QA748M0M2WF 1.1×0.9×0.5 max. 1.5 -

●W-CDMA / LTE Dual Filters

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

Band 3+1 Rx

（Common Input） G6QN2G140M2RN 1.5×1.1×0.5 max. 2.0/1.7 40/52 For B1+B3 CA

●TDD Filters （TD-SCDMA / TD-LTE）

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

Band 34 TRx F6FC2G017H4PC 1.1×0.9×0.44 max. 1.1 - Input Power +29dBm (TDD:50% Duty)

Band 34 Rx F6QP2G017R2SF 1.1×0.9×0.5 max. 1.3 -

Bnad 38 Tx F6KA2G595A4VL 1.4×1.0×0.5 max. 1.5 - Input Power　+29dBm

Bnad 38 Rx F6QA2G595M2QK 1.1×0.9×0.5 max. 1.9 -

F6QB2G595P2BS 1.1×0.9×0.5 max. 2.0 - Balanced 100ohm

Band 39 TRx F6FC1G900H4PB 1.1×0.9×0.44 max. 1.1 - Input power +29dBm (Duty 50%)

Band 39 Rx F6QA1G900M2WD 1.1×0.9×0.5 max. 1.5 -

Band 40 Tx F6HH2G350EH75 1.1×0.9×0.44 max. 1.4 - Input power +30.0dBm TD-LTE 40%duty 5MHz 1RB FBAR

Band 40 Rx F6QA2G350M2QA 1.1×0.9×0.5 max. 2.2 -

F6QB2G350P2BH 1.1×0.9×0.5 max. 2.8 - Balanced 100ohm

Band 41 TRx F6KA2G605A4LA 1.4×1.0×0.5 max. 2.4 - Unbal High power design 2555-2655MHz BW100MHz

F6FC2G600H4PA 1.1×0.9×0.44 max. 2.1 - Unbal High power design & HPUE

for CMCC 2535-2655MHz BW120MHz

F6FC2G595H4PD 1.1×0.9×0.44 max. 1.7 -

Unbal Improved IL

High power design & HPUE for CMCC

2535-2655MHz BW120MHz

F6HP2G593AP20 2.0×1.6×0.6 max. 2.9 - Unbal High power design 2496-2690MHz BW194MHz FBAR

F6HQ2G593AP31 1.8×1.4×0.57 max. 2.7 - Unbal High power design & HPUE

for Sprint 2496-2690MHz BW194MHz FBAR

●TDD Dual Filters （TD-SCDMA / TD-LTE）

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

Band 34 + Band 39 TRx G6FT2G017G2YA 1.5×1.1×0.44 max. 1.3/1.4 - 1 IN / 3 OUT

Band 39 + Band 34

＋Band 41 (BW120MHz) DRx H6FM2G595T2MZ 1.8×1.4×0.44 max. 1.3/1.4/2.7 - 1 IN / 3 OUT

Band 39 Rx + 41 (BW100MHz)

TRx (Common Input) G6KJ2G605D4AB 1.8×1.4×0.5 max. 2.1/2.6 - B41 High power design B41 (2555-2655MHz BW100MHz)

for CMCC CA

Band 41 Rx + 39 (BW100MHz)

DRx (Common Input) G6QN2G605M2RM 1.5×1.1×0.5 max. 2.2/1.3 -

Band 41 (BW120MHz) Rx + 39Rx

(Common Input) G6QN2G595M2RP 1.5×1.1×0.5 max. 2.3/1.3 -

sawfilter_e-E08R01

 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).

HIGH FREQUENCY

PRODUCTS

148

for General Electronic Equipment

■PARTS NUMBER

●GPS

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

GPS F6QA1G575H2JF 1.1×0.9×0.5 max. 0.96 - Low loss, High Att.

GPS (GNSS) F6QA1G585M2AT 1.1×0.9×0.5 max. 1.4 -

F6QB1G585P2BQ 1.1×0.9×0.5 max. 1.7 - 100ohm output

GPS+GLONASS+Galileo+Compass F6QA1G581M2QZ 1.1×0.9×0.5 max. 1.4 -

F6QA1G582H2JM 1.1×0.9×0.5 max. 1.8 - Ladder High Att.

F6BG1G582R6TT 1.1×0.9×0.44 max. 1.7 - 100ohm output

GNSS （L2+L5+B2） F6FC1G197H4PF 1.1×0.9×0.44 max. 1.3 -

●Others

　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］　Remarks

ISM900 (B.W.26MHz) FAR-F5QA-915M00-M2AK 1.1×0.9×0.5 max. 1.8 -

Wireless LAN /

Bluetooth

® F6KA2G436A4VE 1.4×1.0×0.5 max. 2.5 - 2400-2472MHz,+24dBm 2.5GHz High Att (for MTK)

F6KA2G466A4VJ 1.4×1.0×0.5 max. 2.8 - 2432-2500MHz,+24dBm 2.3GHz High Att (for MTK)

F6HG2G441EG65 1.1×0.9×0.5 max. 1.3 - FBAR

F6HG2G441EG66 1.1×0.9×0.5 max. 1.3 - High Att. @2.38GHz FBAR

F6FC2G441H4PE 1.1×0.9×0.44 max. 1.0 - SAW

sawfilter_e-E08R01

 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).

HIGH FREQUENCY

PRODUCTS

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_pack_e-E07R01

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

■PACKAGING

①Minimum Quantity

Type Size [mm] Code & Quantity [pcs]

Duplexer

2.5×2.0 Z 3000 U 10000

2.0×1.6 Z 3000 Y 15000

1.8×1.4 Z 3000 Y 15000

Quadplexer 2.5×2.0 Z 3000 U 10000

Triplexer 2.5×2.0 Z 3000 U 10000

Single Filter

2.0×1.6 Z 3000 Y 15000

1.8×1.4 Z 3000 Y 15000

1.4×1.0 Z 3000 Y 15000

1.1×0.9 J 5000 Y 15000

Dual Filter 1.8×1.4 Z 3000 Y 15000

1.5×1.1 J 5000 Y 15000

②Tape material

●Taping dimensions

Type Size [mm] a b c d e f

Duplexer

2.5×2.0 2.8±0.1 2.3±0.1 1.5+0.1/－0 1.5+0.1/－0 1.0+0.1/－0.0 0.25±0.05

2.0×1.6 2.4±0.1 2.0±0.1 1.05±0.05 1.5+0.1/－0 0.90－0.05 0.25±0.05

1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05

Single Filter

2.0×1.6 2.4±0.1 2.0±0.1 1.05±0.05 1.5+0.1/－0 0.90－0.05 0.25±0.05

1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05

1.4×1.0 1.7±0.1 1.3±0.1 0.5±0.05 1.5+0.1/－0 0.63±0.05 0.20±0.05

1.1×0.9 1.3±0.1 1.1±0.1 0.5±0.05 1.55±0.05 0.63±0.05 0.20±0.05

Dual Filter 1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05

1.5×1.1 1.8±0.1 1.4±0.1 0.5±0.05 1.5+0.1/－0 0.7±0.1 0.25±0.05

Unit：mm

●Material of Tape（Conductive）

Tape : Polystyrene

Top cover tape : Polyethylene terephthalate（PET）and Polyethylene

③Top Tape Strength

The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_pack_e-E07R01

④Reel size

●Material of Reel

Material : Polystyrene＋Carbon

Characteristics : Conform to EIAJ-ET-7200A

Color : Black

Surface resistance（reference value） :109Ω/sq Max.

Code Quantity A B C W1 W2

Z 3,000 pcs φ180.0 +0.0/－1.5 φ66.0 ±0.5 φ13.0 ±0.2 9.0 +1.0/－0.0 11.4 ±1.0

J 5,000 pcs φ180.0 +0.0/－1.5 φ66.0 ±0.5 φ13.0 ±0.2 9.0 +1.0/－0.0 11.4 ±1.0

U 10,000 pcs φ330.0 ±2.0 φ100.0 ±1.0 φ13.0 ±0.2 9.4 ±1.0 13.4 ±1.0

Y 15,000 pcs φ330.0 ±2.0 φ100.0 ±1.0 φ13.0 ±0.2 9.4 ±1.0 13.4 ±1.0

Unit：mm

⑤Reel label and Reel C-Label sticking and Winding method

●Surface

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E05R01

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

■RELIABILITY DATA

1. Terminal stregth

Specified Value No damage to be found.

Test Methods and

Remarks

Bend width 4mm, hold for 5±1 sec.

according to IEC60068-2-21(JISC60068-2-21)

2. Mechanical shock

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions.

according to IEC68-2-27(JISC60068-2-27).

3. Vibration

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a

vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)

4. Drop 1

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks Drop 3 times onto concrete floor from the height of 1.0m.

5. Drop 2

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.

6. Temperature cycling

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks Temp. range －40 to ＋100℃. 500cycle.

７. Static humidity

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks ＋85℃, 90% to 95%RH, apply DC5V, 1000hours.

8. High temperature storage life

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks ＋100℃, 1000hours.

9. Low temperature storage life

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks －40℃, 1000hours.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E05R01

10. High Temperature Bias （Duplexer only)

Specified Value After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks ＋50℃, ＋29dBm, 50000hours.

11. Solderbility 1

Specified Value More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks Lead-free Solder paste, Reflow；Peak temperature 245℃

12. Solderbility 2

Specified Value More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks Sn-Pb Solder paste, Reflow；Peak temperature 235℃

13. Solder heat resistance

Specified Value After testing, meet the specified characteristics at a room temperature.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks

◆Recommended temperature profile of reflow soldering

Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.

Suitable condition for solder heating is differed depending on composition and manufacturing method.

Please contact to solder manufacturer for the details.