8LT Series Description Applications * High density connector from 1 to 128 contacts * Sizes 22D, 20, 16, 12, # 16 coax and # 8 triax * Bayonet locking system * 100% scoop proof High density connectors for all military and aeronautical purposes. Standards MIL-C 38999 Series I - QPL approved NFC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Characteristics Electrical Climatic Mechanical Test voltage (Vrms) * Temperature range : - cadmium plating (B) : -65C +175C - nickel plating (F) : -65C +200C * Sealing : mated connectors - differential pressure 2 bars - leakage 16 cm3/hr * Salt spray to : MIL STD 1344 method 1001 - 500 hours (version B) - 48 hours (version F) NFC 93422 - 48 hours (version F) * Damp heat : MIL-C 38999 : 10 cycles 24 hrs NFC 93422 : 56 days * Shell : aluminum alloy * Plating : - olive green cadmium (B) - nickel (F) * Insulator : thermoplastic * Grommet and seal : silicone elastomer * Contact : copper alloy * Plating : gold over nickel * Endurance : 500 cycles * Shock : 300 g during 3 ms and MIL-S901 grade A * Vibration : sine 10 to 2000 H 30 g random 100 to 300 Hz - 5 (g2/Hz) * Contact retention : (mini force in N) size 22 D : 45 N size 20 : 67 N size 16 : 110 N size 12 : 110 N size 8 : 110 N Service M I II sea level 1300 1800 2300 at 21000 m 800 1000 1000 * Contact resistance : resistance of wire included in measurement : size 22D : 14.6 m size 20 : 7.3 m size 16 : 3.8 m size 12 : 1.7 m * Insulation resistance : 5000 M (at 500 Vdc) * Contact rating : size 22D : 5 A size 20 : 7.5 A size 16 : 13 A size 12 : 23 A * Shell continuity : - olive green plating : 2.5 m - nickel plating : 1 m * Shielding : - 90 dB to 100 MHz - 50 dB to 10000 MHz * Triaxial contact : # 8 - bandwidth : 0 - 20 MHz - voltage rating : 500 Vac Max. 125 Vac at 21000 m - voltage drop : inner and middle contact 55 mV under 1A outer contact 75 mV under 12A Resistance to fluids To MIL-C 38999 : * MIL-L 7808 * MIL-H 5606 * MIL-C 25769 * hydraulic fluids To NFC 93422 : F46 - F54 - 0/180 * * * * MIL-L 23699 MIL-A 8243 MIL-T 5624 (JP5) solvents - H515 - H542 - XH45 Connectors ordering information FCI Souriau part numbers 8LT basic series shell type designator 0 3 2 7 1 5 - square flange receptacle square flange receptacle (rear mounting) square flange receptacle not accepting backshell jam nut receptacle cable connecting receptacle plug with RFI shielding -- - connectors with standard crimp contacts L C T W - receptacle receptacle receptacle receptacle with with with with 09-11-13-15-17-19-21-23-25 plating F - nickel B - olive green cadmium (MIL-C 38999 - HE 308) - see table p 120 contact type P - male S - female A - male connector supplied less contact or with specific contacts B - female connector supplied less contact or with specific contacts polarization N - normal A-B-C-D - see table p 77 Note : connectors supplied with standard contacts 74 long spill (male and female # 22D) short spill (male and female # 22D, # 20, # 16) male contacts size 20 for wire wrap (2 wraps) male contacts size 22 for wire wrap (3 wraps) shell size contact layout 0 - 13 B 35 P N 8LT Series MIL-C 38999 part numbers MS basic series shell type 27466 27656 27468 27467 - T - with thread for backshell, supplied less backshell shell size 09-11-13-15-17-19-21-23-25 plating B - olive green cadmium polarization T 13 B 35 P * square flange receptacle (front mounting) square flange receptacle (rear mounting) jam nut receptacle plug with RFI shielding class contact layout contact type 27466 F - nickel - see table p 120 P - male S - female A - male connector supplied less contact or with specific contacts B - female connector supplied less contact or with specific contacts N - Normal (not included in part number) A-B-C-D - see table p 77 Note : connectors supplied with MIL-C contacts HE 308 part numbers HE308 - 00 basic series shell type 00 07 06 11 - T 13 - 35 P N 7 M * 103 G 01 * square flange receptacle jam nut receptacle plug with RFI shielding jam nut receptacle with straight spill contacts class shell size 09-11-13-15-17-19-21-23-25 contact layout contact type P - male S - female polarization N - normal A-B-C-D - see table p 77 plating 6 - nickel 7 - olive green cadmium T - sealed - see table p 120 contractual specification specification - connector supplied with contact : (without specification) L - connector supplied without contact Backshells ordering information FCI Souriau part numbers 8LST basic series shell size index number plating 09 101 11 102 13 103 15 104 17 105 B - olive green cadmium 19 106 21 107 23 108 25 109 F - nickel backshell type 01 - backnut 02 - straight cable-clamp 03 - elbow cable clamp 07 - backshell for screen termination and heatshrink boot suffix for backshell type 07 only 1 - for receptacle type 0 (shells 09 to 25) - for plug type 5 (shells 09 to 23) 2 - for receptacle type 7 (shells 09 to 25) - for plug type 5 (shell 25 only) HE 308 part numbers HE 308 - 13 basic series backshell type 13 - backshell for screen termination and heatshrink boot shell size 09-11-13-15-17-19-21-23-25 designator 1 - for receptacle type 0 (shells 09 to 25) - for plug type 5 (shells 09 to 23) plating 6 - nickel 13 1 7 M 2 - for receptacle type 7 (shells 09 to 25) - for plug type 5 (shell 25 only) 7 - olive green cadmium contractual specification 75 8LT Series Cross reference list : FCI Souriau part numbers, HE 308 and MIL-C 38999 standards FCI Souriau 8LT1 - ** B ** PS NFC 93422 / HE 308 MIL-C 38999 Series I 8LT0 - ** B ** PS cable connecting receptacle HE308-00T ** - ** PS 7 8LT3 - ** B ** PS 8LT7 - ** B ** PS HE308-07T ** - ** PS 7 8LT0 - ** F ** P S HE308-00T ** - ** PS 6 8LT3 - ** F ** PS 8LT7 - ** F ** PS P HE308-07T ** - ** S 6 8LT1 - ** F ** P S MS27466T ** B ** P S MS27656T ** B ** P S MS27468T ** B ** P MS27466T ** F ** S MS27656T ** F ** P S MS27468T ** F ** P S 8LT5 - ** F ** jam nut receptacle square flange receptacle square flange receptacle (rear mounting) jam nut receptacle square flange receptacle not accepting backshell 8LT2 - ** F ** PS P S P S square flange receptacle square flange receptacle (rear mounting) cable connecting receptacle 8LT2 - ** B ** PS 8LT5 - ** B** Designation square flange receptacle not accepting backshell P HE308-06T ** - ** S 7 HE308-06T ** - ** PS 6 P MS2746T ** B ** S P MS2746T ** F ** S 8LST *** G01 plug with RFI shielding plug with RFI shielding backnut 8LST *** G02 HE308-11 ** 27 straight cable clamp 8LST *** G03 HE308-12 ** 27 elbow cable clamp 8LST *** B071 HE308-13 ** 17 backshell for screen termination 8LST *** B072 HE308-13 ** 27 backshell for screen termination and heatshrink sleeving and heatshrink sleeving 8LST *** B01 M85049/27-**W 8LST *** B02 backnut straight cable clamp 8LST *** B03 elbow cable clamp 8LST *** F01 M85049/27-**N backnut 8LST *** F02 HE308-11 ** 26 straight cable clamp 8LST *** F03 HE308-12 ** 26 elbow cable clamp 8LST *** F071 HE308-13 ** 16 backshell for screen termination 8LST *** F072 HE308-13 ** 26 backshell for screen termination 8LTE04G ** HE308-B00 ** 7 8LTE06G ** HE308-B07 ** 7 cap for jam nut receptacle 8LTE04F ** HE308-B00 ** 6 cap for square flange receptacle 8LTE06F ** HE308-B07 ** 6 cap for jam nut receptacle 8LTF05G ** HE308-B16 ** 7 cap for plug 8LTF07G ** HE308-B06 ** 7 cap for plug 8LTF05F ** HE308-B16 ** 6 cap for plug 8LTF07F ** HE308-B06 ** 6 and heatshrink sleeving and heatshrink sleeving cap for square flange receptacle cap for plug M39029/58-360 M39029/58-360 male contact # 22D M39029/58-363 M39029/58-363 male contact # 20 M39029/58-364 M39029/58-364 male contact # 16 M39029/58-365 M39029/58-365 male contact # 12 M39029/56-348 M39029/56-348 female contact # 22D M39029/56-351 M39029/56-351 female contact # 20 M39029/56-352 M39029/56-352 female contact # 16 M39029/56-353 M39029/56-353 female contact # 12 8599-0988 M39029/90-529 male triaxial contact # 8 8599-0998 M39029/91-530 female triaxial contact # 8 8660-212 MS27488-22 filler plug # 22D 8522-389A MS27488-20 filler plug # 20 8522-390A MS27488-16 filler plug # 16 8522-391A MS27488-12 filler plug # 12 8599-0308 M81969/14-01 plastic tool for contact # 22D 8522-20 M81969/14-10 plastic tool for contact # 20 8522-16 M81869/14-03 plastic tool for contact # 16 8522-12 M81969/14-04 8660-197 76 dummy contact # 8 8599-0022 plastic tool for contact # 12 tool for contact # 8 8LT Series Polarization Polarization is determined by the master keyway position. The secondary keyway positions remain fixed. view from front face of receptacle view from front face of plug Shell size Contacts layout Service M 09 09-35 09-98 X X 11 11-35 11-98 11-01 11-05 11-04 13-35 13-98 13-08 X 13 X 15 15-35 15-19 15-05 15-97 15-18 17-35 17-26 17-06 17-08 17-99 17-75 X 19-35 19-32 19-11 X 21-35 21-41 21-16 21-11 21-39 21-75 X X 23 23-35 23-53 23-21 X 25 25-35 25-61 25-46 25-19 25-29 25-43 25-24 17 19 21 I Number of contacts II # 22D # 20 # 16 Angles in degrees # 12 #8 N A 95 95 77 77 - - 113 113 5 4 95 95 95 95 95 81 81 81 81 81 67 67 67 67 67 123 123 123 123 123 109 109 109 109 109 10 8 95 95 95 75 75 75 63 63 63 127 127 127 115 115 115 95 95 95 95 95 74 74 74 74 74 61 61 61 61 61 129 129 129 129 129 116 116 116 116 116 95 95 95 95 95 95 77 77 77 77 77 77 65 65 65 65 65 65 125 125 125 125 125 125 113 113 113 113 113 113 95 95 95 77 77 77 65 65 65 125 125 125 113 113 113 95 95 95 95 95 95 77 77 77 77 77 77 65 65 65 65 65 65 125 125 125 125 125 125 113 113 113 113 113 113 95 95 95 80 80 80 69 69 69 121 121 121 110 110 110 95 95 95 95 95 95 95 80 80 80 80 80 80 80 69 69 69 69 69 69 69 121 121 121 121 121 121 121 110 110 110 110 110 110 110 6 X 3 13 X 6 X 1 X X 22 X X 37 X 19 X X X 8 18 5 4 55 X X 26 6 X X X 21 8 2 2 66 X 32 X 11 79 X 41 X X 16 11 X 37 2 4 100 X 53 X 21 128 X X X X X X 61 40 4 2 19 23 29 20 12 12 B C D 77 8LT Series Dimensions Plug type 5 L1 OD1 shell size D1 Max L1 Max A D2 Max D3 Max L2 Max L3 Max L3-L5-L8-L11 plug backshell assembly overall length 13.54/.533 Max. Detail A : D4 sealing boot used for triaxial 8 Contacts only Max min D5 Backshells Max L2 OD2 Backnut type 01 OD3 F L3 Max L4 Max L5 Max D6 Max min D7 O for flange Max. L4 Max. L7 Max L8 Max F OD5 Straight cable-clamp type 02 OD4 L6 L5 D8 Max min D9 L6 Max OD6 D10 Max L7 L9 13 15 17 19 21 23 L10 L8 L 11 Max O for flange L11 OD10 OD9 OD8 L9 L10 Max 25 21.80 25.00 29.00 32.50 35.70 38.50 41.70 44.85 48.00 .858 .984 1.142 1.280 1.406 1.516 1.642 1.766 1.890 31.32 31.32 31.32 31.32 31.32 31.32 31.32 31.32 31.32 1.233 1.233 1.233 1.233 1.233 1.233 1.233 1.233 1.233 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 36.66 36.66 36.66 36.66 36.66 36.66 36.66 36.66 36.66 1.443 1.443 1.443 1.443 1.443 1.443 1.443 1.443 1.443 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 .220 .220 .055 .055 .094 3.20 4.80 6.40 .126 .189 .252 .346 1.345 .469 1.468 .594 1.593 .594 9.50 12.70 15.90 19.10 22.20 25.40 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 47.22 48.02 49.52 55.92 59.42 59.42 59.42 59.42 59.42 1.859 1.891 1.950 2.202 2.339 2.339 2.339 2.339 2.339 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 .157 .189 .217 .252 .311 .126 6.40 .252 .374 1.468 .406 1.593 .563 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 60.68 60.68 62.66 67.03 71.40 71.81 73.79 77.34 80.14 2.389 2.389 2.467 2.639 2.811 2.827 2.905 3.045 3.155 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 .795 6.90 .272 7.00 .276 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 .378 .500 .583 .705 .783 .909 1.031 1.134 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 .630 type 1 1.094 type 2 OD7 78 11 .744 .870 .996 1.122 1.240 1.366 1.492 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 Elbow cable-clamp type 03 Backshell for screen termination and heatshrink boot type 07 09 - 1.614 - 1.094 1.094 1.173 1.173 1.213 1.362 1.362 - - - - - - - - 33.50 1.319 - - - - - - - 3.40 3.40 3.40 3.40 3.40 3.40 - 3.40 3.40 3.40 .134 .134 .134 .134 .134 .134 .134 .134 .134 52.22 52.22 52.22 54.22 54.22 55.22 59.02 59.02 59.02 2.056 2.056 2.056 2.135 2.135 2.174 2.324 2.324 2.324 8LT Series Receptacle type 0 L1 L2 B1 shell size 09 11 13 15 17 19 21 23 25 4 holes OJ B1 Max E1 OD1 A .719 J L1 Max L2 Max 13.39/.527 Max Detail A : L3 Max sealing boot used for triaxial 8 Contacts only D2 Max Backshells OD2 Backnut type 01 OD3 L4 D3 Max L4 Max L5 Max D4 Max min L5 D5 Max O for flange F Max L6 Max F OD4 OD5 L6 Straight cable-clamp type 02 L7 Max D6 Max min D7 L7 Max L8 Max L9 Max L9 OD6 L8 Elbow cable-clamp type 03 L10 Max D8 Max min D9 OD7 Max L10 D10 Max O for flange L11 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 Max. panel thickness 2.50/.098 L5-L7-L10-L13 receptacle backshell assembly overall length .955 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 E1 D1 L3 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.73 3.73 .128 .128 .128 .128 .128 .128 .128 .147 .147 16.05 16.05 16.05 16.05 16.05 16.05 15.29 15.29 15.29 .632 .632 .632 .632 .632 .632 .602 .602 .602 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 .531 .531 .531 .531 .531 .531 .531 .531 .531 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 .098 .098 .098 .098 .098 .098 .128 .128 .128 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 18.83 18.83 18.83 18.83 18.83 18.83 18.83 18.83 18.83 .741 .741 .741 .741 .741 .741 .741 .741 .741 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 .220 .220 .055 .055 .094 3.20 4.80 6.40 .126 .189 .252 .346 1.345 .469 1.468 .594 1.593 .594 9.50 12.70 15.90 19.10 22.20 25.40 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 29.39 30.19 31.69 38.09 41.59 41.59 41.59 41.59 41.59 1.157 1.189 1.248 1.500 1.637 1.637 1.637 1.637 1.637 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 .157 .189 .217 .252 .311 .126 6.40 .252 .374 1.468 .406 1.593 .563 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 42.85 42.85 44.83 51.00 53.57 53.98 55.96 59.51 62.31 1.687 1.687 1.765 2.008 2.109 2.125 2.203 2.343 2.453 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 .795 6.90 .272 7.00 .276 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 .378 .500 .583 .705 .783 .909 1.031 1.134 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60 type 1 1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362 type 2 - - - - - - - - - - - - - - - - - 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 .134 .134 .134 .134 .134 .134 .134 .134 .134 - L11 OD10 OD9 OD8 Backshell for screen termination and heatshrink boot type 07 L12 L13 Max Max 34.39 34.39 34.39 36.39 36.39 37.39 41.19 41.19 41.19 1.354 1.354 1.354 1.433 1.433 1.472 1.622 1.622 1.622 L12 L13 79 8LT Series Receptacle type 3 L1 L2 B1 shell size 09 11 13 15 17 19 21 23 25 4 holes OJ E1 OD1 B1 A Max .719 L3 L1 Max L2 Max 13.58/.535 Max. Detail A : L3 Max sealing boot used for triaxial 8 Contacts only D2 Max Backshells D3 Max L4 Max OD2 OD3 L4 Backnut type 01 L5 Max D4 Max min D5 L5 Max F Max L6 Max O for flange L7 Max D6 Max F OD4 Straight cable clamp type 02 OD5 L6 min D7 Max L7 L8 Max L9 Max L10 Max D8 Max L9 Elbow cable clamp type 03 OD6 L8 min D9 Max OD7 L10 D10 Max O for flange L11 L12 L13 80 OD10 OD9 L13 OD8 Backshell for screen termination and heatshrink boot type 07 L12 1.142 1.234 1.329 1.453 1.579 1.703 1.831 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.73 3.73 .128 .128 .128 .128 .128 .128 .128 .147 .147 20.83 20.83 20.83 20.83 20.83 20.83 20.08 20.08 20.08 .820 .820 .820 .820 .820 .820 .791 .791 .791 10.50 10.50 10.50 10.50 10.50 10.50 11.25 11.25 11.25 .413 .413 .413 .413 .413 .413 .443 .443 .443 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 .098 .098 .098 .098 .098 .098 .128 .128 .128 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 15.85 15.85 15.85 15.85 15.85 15.85 16.60 16.60 16.60 .624 .624 .624 .624 .624 .624 .654 .654 .654 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 .220 .220 .055 .055 .094 3.20 4.80 6.40 .126 .189 .252 .346 1.345 .469 1.468 .594 1.593 .594 9.50 12.70 15.90 19.10 22.20 25.40 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 26.40 27.20 28.70 35.10 38.60 38.60 39.40 39.40 39.40 1.039 1.071 1.130 1.382 1.520 1.520 1.551 1.551 1.551 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 .157 .189 .217 .252 .311 .126 6.40 .252 .374 1.468 .406 1.593 .563 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 39.90 39.90 41.90 48.10 50.60 51.00 53.80 57.30 60.10 1.571 1.571 1.650 1.894 1.992 2.008 2.118 2.256 2.366 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 .795 6.90 .272 7.00 .276 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 .378 .500 .583 .705 .783 .909 1.031 1.134 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 .630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60 type 1 1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362 type 2 L11 1.047 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 J L5-L7-L10-L13 receptacle backshell assembly overall length .955 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 E1 D1 Max. panel thickness 3.00/.118 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50 Max Max - - - - - - - - - - - - - - - - - 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 .134 .134 .134 .134 .134 .134 .134 .134 .134 31.40 31.40 31.40 33.40 33.40 34.40 39.00 39.00 39.00 1.236 1.236 1.236 1.315 1.315 1.354 1.535 1.535 1.535 8LT Series Receptacle type 7 L1 shell size B2 L2 B1 B1 OD1 B D2 L5-L7-L10-L13 receptacle backshell assembly overall length 13.58/.527 Max Detail A : sealing boot used for triaxial 8 Contacts only L1 Max L2 Max L3 Max D3 Max D4 Max L4 Max OD4 OD3 L5 Max D5 Max min D6 Max F Max L6 Max O for flange L7 Max D7 Max min D8 Max L7 L8 Max L9 Max L10 Max D9 Max L9 OD7 L8 Elbow cable clamp type 03 min D10 OD8 Max O for flange L10 D11 Max type 1 L11 L11 OD11 L12 OD10 OD9 Backshell for screen termination and heatshrink boot type 07 17 19 21 23 25 1.264 1.390 1.515 1.639 1.826 1.952 2.077 2.202 1.006 1.193 1.317 1.443 1.567 1.693 1.817 2.006 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 30.54 35.23 38.40 41.64 44.75 49.53 52.67 55.94 59.02 1.202 1.387 1.512 1.639 1.762 1.950 2.074 2.202 2.324 23.36 23.36 23.36 23.36 23.36 23.36 23.36 23.36 23.36 .920 .920 .920 .920 .920 .920 .920 .920 .920 8.32 8.32 8.32 8.32 8.32 8.32 8.32 8.32 8.32 .328 .328 .328 .328 .328 .328 .328 .328 .328 3.00 3.00 3.00 3.00 3.00 3.79 3.79 3.79 3.79 .118 .118 .118 .118 .118 .149 .149 .149 .149 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 13.66 13.66 13.66 13.66 13.66 13.66 13.66 13.66 13.66 .538 .538 .538 .538 .538 .538 .538 .538 .538 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 .220 .220 .055 .055 .094 3.20 4.80 6.40 .126 .189 .252 .346 1.345 .469 1.468 .594 1.593 .594 9.50 12.70 15.90 19.10 22.20 25.40 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 24.22 25.02 26.52 32.92 36.42 36.42 36.42 36.42 36.42 .954 .985 1.044 1.296 1.434 1.434 1.434 1.434 1.434 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 1.468 1.593 .157 .189 .217 .252 .311 F OD6 OD5 L6 Straight cable clamp type 02 1.077 .572 Max L4 L5 15 27.35 32.10 35.31 38.49 41.63 46.37 49.58 52.76 55.93 .880 Backshells Backnut type 01 13 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 D1 L3 11 22.35 25.55 30.30 33.45 36.65 39.80 43.00 46.15 50.95 B2 OD2 Max. panel thickness 3.18/.125 Max 09 L13 .126 6.40 .252 .374 .406 .563 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 37.68 37.68 39.66 45.83 48.40 48.81 50.79 54.34 57.14 1.483 1.483 1.561 1.804 1.906 1.922 2.000 2.139 2.250 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 .795 6.90 .272 7.00 .276 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 .378 .500 .583 .705 .783 .909 1.031 1.134 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 .630 .744 1.122 1.240 1.366 1.492 1.614 - - .870 - .996 - - - - - - - - - - - - - - - 26.70 26.70 26.70 28.70 28.70 29.70 33.50 33.50 33.50 type 2 1.051 1.051 1.051 1.130 1.130 1.169 1.319 1.319 1.319 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 .134 .134 .134 .134 .134 .134 .134 .134 .134 Max Max 29.22 29.22 29.22 31.22 31.22 32.22 36.02 36.02 36.02 1.150 1.150 1.150 1.229 1.229 1.269 1.418 1.418 1.418 L12 L13 81 8LT Series Cable connecting receptacle type 1 L1 L2 B1 shell size B1 Max A OD1 L3 L5-L7-L10-L13 receptacle backshell assembly overall length Backshells L2 Max L3 Max D2 Max D3 Max L4 Max L5 Max OD2 OD3 D4 Max min D5 Max L5 F Max L6 Max L7 Max O for flange L6 F D7 Max L8 L7 L8 Max L9 Max L10 Max D8 OD6 Max min L9 Elbow cable clamp type 03 Max min OD5 Straight cable clamp type 02 OD4 D6 D9 Max OD7 O for flange D10 Max L10 L12 Max L13 Max 82 OD10 OD8 OD9 L11 L13 19 21 23 25 .875 1.009 1.095 1.234 1.363 1.497 1.654 1.831 1.010 1.144 1.230 1.364 1.498 1.632 1.789 1.967 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 16.05 16.05 16.05 16.05 16.05 16.05 15.29 15.29 15.29 .632 .632 .632 .632 .632 .632 .602 .602 .602 13.45 13.45 13.45 13.45 13.45 13.45 13.45 13.45 13.45 .530 .530 .530 .530 .530 .530 .530 .530 .530 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 .098 .098 .098 .098 .098 .098 .128 .128 .128 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93 .274 .412 .526 .651 .776 .882 1.006 1.132 1.257 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 .445 .445 .445 .445 .445 .445 .445 .445 .445 37.36 37.36 37.36 37.36 37.36 37.36 37.36 37.36 37.36 1.471 1.471 1.471 1.471 1.471 1.471 1.471 1.471 1.471 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10 .220 .220 .055 .055 .094 3.20 4.80 6.40 .126 .189 .252 .346 1.345 .469 1.468 .594 1.593 .594 9.50 12.70 15.90 19.10 22.20 25.40 .374 .500 .626 .752 .874 1.000 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45 .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75 .875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250 47.98 48.72 50.22 56.62 60.12 60.12 60.12 60.12 60.12 1.889 1.918 1.977 2.229 2.367 2.367 2.367 2.367 2.367 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46 .617 .734 .858 .984 1.112 1.218 1.345 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30 .157 .189 .217 .252 .311 .126 6.40 .252 .374 1.468 .406 1.593 .563 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40 .374 .437 .563 .626 .752 .874 .937 1.000 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78 1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66 1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719 61.38 61.38 63.36 69.53 72.10 72.51 74.49 78.04 80.84 2.417 2.417 2.494 2.737 2.839 2.855 2.933 3.072 3.183 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20 .795 6.90 .272 7.00 .276 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80 .378 .500 .583 .705 .783 .909 1.031 1.134 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90 .382 .504 .587 .709 .787 .913 1.035 1.138 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00 .630 type 1 1.094 type 2 L12 17 .744 .870 .996 1.122 1.240 1.366 1.492 1.614 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60 L11 Backshell for screen termination and heatshrink boot type 07 .745 .572 Max L4 Backnut type 01 15 18.92 22.22 25.62 27.82 31.35 34.62 38.02 42.02 46.50 .880 13.39/.527 Max Detail A : sealing boot used for triaxial 8 Contacts only 13 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18 D1 L1 11 22.35 25.65 29.05 31.25 34.65 38.05 41.45 45.45 49.95 E1 OE1 09 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362 - - - - - - - - - - - - - - - - - 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 .134 .134 .134 .134 .134 .134 .134 .134 .134 - 52.92 52.92 52.92 54.92 54.92 55.92 59.72 59.72 59.72 2.083 2.083 2.083 2.162 2.162 2.202 2.351 2.351 2.351 8LT Series Receptacle with straight spill contacts receptacle type 7 receptacle type 0 L2 receptacle type 3 L4 L3 L3 L5 shell size 09 11 10.06 10.06 10.06 .396 .396 .396 min 9.07 9.07 9.07 .357 .357 .357 .357 .357 .357 .357 .357 .357 Max 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 .396 .396 .396 .396 .396 .396 .396 .396 .396 min 8.74 8.74 8.74 8.74 8.74 8.74 8.74 8.74 8.74 .344 .344 .344 .344 .344 .344 .344 .344 .344 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 .403 .403 .403 .403 .403 .403 .403 .403 .403 min 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 .364 .364 .364 .364 .364 .364 .364 .364 .364 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 .403 .403 .403 .403 .403 .403 .403 .403 .403 min 8.91 8.91 8.91 8.91 8.91 8.91 8.91 8.91 8.91 Max CM # 22D 8LT CF L2 CM # 22D HE308 CF #20 - #16 8LT HE308 Max CM and CF min 15 17 19 21 23 25 10.06 10.06 10.06 10.06 10.06 .396 .396 .396 .396 .396 .396 9.07 9.07 9.07 9.07 9.07 9.07 10.06 .351 .351 .351 .351 .351 .351 .351 .351 .351 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 .403 .403 .403 .403 .403 .403 .403 .403 .403 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 .364 .364 .364 .364 .364 .364 .364 .364 .364 8LT 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 .028 .028 .028 .028 .028 .028 .028 .028 .028 HE308 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 #22D OA .020 .020 .020 .020 .020 .020 .020 .020 .020 #20 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 .028 .028 .028 .028 .028 .028 .028 .028 .028 #16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 .045 .045 .045 .045 .045 .045 .045 .045 .045 8LT 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 .157 .157 .157 .157 .157 .157 .157 .157 .157 HE308 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 PC #22D L3 13 OA OA OA L3 .197 .197 .197 .197 .197 .197 .197 .197 .197 PC#20 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 .197 .197 .197 .197 .197 .197 .197 .197 .197 PC#16 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 PL#22D 8LT L4 CM : male contact .197 .197 .197 .197 8.50 8.50 8.50 8.50 .335 .335 .335 .335 .335 .335 .335 .335 15.08 15.08 15.08 15.08 15.08 15.08 15.08 .594 .594 .594 .594 .594 .594 .594 .594 .594 min 13.91 13.91 13.91 13.91 13.91 13.91 13.91 13.91 13.91 .548 .548 .548 .548 .548 .548 .548 .548 .548 Max 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 .594 .594 .594 .594 .594 .594 .594 .594 .594 min 13.58 13.58 13.58 13.58 13.58 13.58 13.58 13.58 13.58 .535 .535 .535 .535 .535 .535 .535 .535 .535 15.25 15.25 15.25 15.25 15.25 15.25 15.25 15.25 15.25 .600 .600 .600 .600 .600 .600 .600 .600 .600 14.08 14.08 14.08 14.08 14.08 14.08 14.08 14.08 14.08 .554 .554 .554 .554 .554 .554 .554 .554 .554 Max 12.47 12.47 12.47 12.47 12.47 12.47 13.22 13.22 13.22 .491 .491 .491 .491 .491 .491 .520 .520 .520 min 11.60 11.60 11.60 11.60 11.60 11.60 12.35 12.35 12.35 .457 .457 .457 .457 .457 .457 .486 .486 .486 Max 12.47 12.47 12.47 12.47 12.47 12.47 13.22 13.22 13.22 .491 .491 .491 .491 .491 .491 .520 .520 .520 min 11.27 11.27 11.27 11.27 11.27 11.27 12.02 12.02 12.02 CF #20 - #16 8LT .197 8.50 15.08 CM L5 .197 8.50 .335 Max CM and CF min #22D 8LT .197 8.50 15.08 CF #20 - #16 8LT .197 8.50 Max CM #22D 8LT .197 8.50 Max CM and CF min .444 .444 .444 .444 .444 .444 .473 .473 .473 12.64 12.64 12.64 12.64 12.64 12.64 13.39 13.39 13.39 .498 .498 .498 .498 .498 .498 .527 .527 .527 11.77 11.77 11.77 11.77 11.77 11.77 12.52 12.52 12.52 .463 .463 .463 .463 .463 .463 .493 .493 .493 CF : female contact PL : long spill PC : short spill 83 8LT Series Receptacle with wire wrap contacts Receptacle type 7 Receptacle type 2 A L1 L2 4 holes OJ 0.034 22D W 3 wraps 20 T2 wraps A Max B Max E1 OD2 contact contact size type 0.86 OD1 B 10.06 16.00 0.396 0.63 L3 10.06 16.00 0.396 B1 0.63 shell size L1 Max L2 Max L3 Max D1 D2 Max B1 Max E1 09 11 13 15 17 19 20.83 20.83 20.83 20.83 .820 .820 .820 .820 .820 .820 .791 .791 .791 5.55 5.55 5.55 5.55 5.55 5.55 6.30 6.30 6.30 20.83 20.83 21 23 25 20.08 20.08 20.08 .219 .219 .219 .219 .219 .219 .248 .248 .248 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24 .098 .098 .128 .128 .128 .098 .098 .098 .098 14.53 17.78 21.59 24.77 .572 .700 .850 .975 9.95 12.90 16.10 19.05 .392 .508 .634 .750 24.25 26.60 29.00 31.35 .955 1.047 1.142 1.234 18.26 20.62 23.01 24.61 .719 .812 .906 .969 27.94 30.66 1.100 1.207 22.20 25.20 .874 .992 33.75 36.90 1.329 1.453 26.97 29.36 1.062 1.156 33.83 37.00 40.18 1.332 1.457 1.582 28.35 31.50 34.70 1.116 1.240 1.366 40.10 43.25 46.50 1.579 1.703 1.831 31.75 34.93 38.10 1.250 1.375 1.500 Panel cut-out e 4OJ shell size d2 J e P 84 d2 O d1 O e d1 min jam nut receptacle p square flange receptacle 09 11 18.70 13 21.80 15 25.00 17 19 21 23 28.30 31.00 34.20 37.30 25 type 0 15.70 40.50 .618 .736 .858 .984 1.114 1.220 1.346 1.469 1.594 type 3 16.66 20.22 23.42 26.59 30.96 32.94 36.12 39.29 42.47 .656 .796 .922 1.047 1.219 1.297 1.422 1.547 1.672 17.70 20.88 25.58 28.80 31.98 35.15 38.28 41.50 44.68 .697 .822 1.007 1.134 1.259 1.384 1.507 1.634 1.759 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 .128 .128 .128 .128 .128 .128 .128 .154 .154 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 38.10 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 16.99 19.53 24.26 27.53 30.68 33.86 37.06 40.01 43.41 .669 .769 .955 1.084 1.208 1.333 1.459 1.575 1.709 8LT Series Accessories Protective caps for receptacles Protective caps for plugs B D Od1 OC OA Od1 L1 L1 type 01 type 01 B OA OC OA D 2 Od L2 L5 type 02 type 03 B D Od1 OA OC Od1 L3 L6 type 04 type 05 D OA OC B 2 Od L4 L7 type 06 shell size 09 11 13 15 17 19 21 23 25 type 07 A Max B Max C Max D Max d1 min d2 min L1 L2 21.20 28.00 20.50 29.50 3.20 17.80 76.00 76.00 .835 1.102 .807 1.161 .126 .701 2.992 2.992 24.40 28.00 23.70 29.50 3.20 21.30 76.00 76.00 L3 L4 L5 L6 L7 105.00 105.00 200.00 160.00 4.134 4.134 7.874 6.299 6.299 105.00 105.00 200.00 160.00 160.00 160.00 .961 1.102 .933 1.161 .126 .839 2.992 2.992 4.134 4.134 7.874 6.299 6.299 28.40 28.00 26.90 29.50 3.20 25.70 89.00 89.00 105.00 105.00 200.00 160.00 160.00 1.118 1.102 1.059 1.161 .126 1.012 3.504 3.504 4.134 4.134 7.874 6.299 6.299 31.60 28.00 30.10 29.50 3.20 29.00 89.00 89.00 105.00 105.00 200.00 160.00 160.00 1.244 1.102 1.185 1.161 .126 1.142 3.504 3.504 4.134 4.134 7.874 6.299 6.299 35.50 28.00 33.20 29.50 3.20 32.00 89.00 89.00 105.00 105.00 200.00 160.00 160.00 1.398 1.102 1.307 1.161 .126 1.260 3.504 3.504 4.134 4.134 7.874 6.299 6.299 37.90 28.00 36.40 29.50 3.20 35.30 89.00 89.00 105.00 105.00 200.00 160.00 160.00 1.492 1.102 1.433 1.161 .126 1.390 3.504 3.504 4.134 4.134 7.874 6.299 6.299 41.10 28.00 39.60 29.50 3.20 38.10 102.00 102.00 105.00 105.00 200.00 160.00 160.00 1.618 1.102 1.559 1.161 .126 1.500 4.016 4.016 4.134 4.134 7.874 6.299 6.299 44.30 28.00 42.80 29.50 3.20 41.70 102.00 102.00 105.00 105.00 200.00 160.00 160.00 1.744 1.102 1.685 1.161 .126 1.642 4.016 4.016 4.134 4.134 7.874 6.299 6.299 47.40 28.00 45.90 29.50 3.20 44.70 102.00 102.00 105.00 105.00 200.00 160.00 160.00 1.866 1.102 1.807 1.161 .126 1.760 4.016 4.016 4.134 4.134 7.874 6.299 6.299 85 8LT Series Protective caps 8LT basic series cap type E fixing type cap for receptacle 01 - plastic sleeved metal cord with eyelet 02 - plastic sleeved metal cord with ring 04 - nylon cord with eyelet 06 - nylon cord with ring plating B F shell size 09-11-13-15-17-19-21-23-25 - cap for receptacle F E 01 G - cap for plug cap for plug 01 - plastic sleeved metal cord with eyelet 03 - nylon cord without fastener 05 - nylon cord with eyelet 07 - nylon cord with strap - olive green cadmium (MIL-C 38999) - nickel Dummy receptacles 8LTO-09GUR 11 8LTO-11GUR 13 8LTO-13GUR 15 8LTO-15GUR 17 8LTO-17GUR 19 8LTO-19GUR 21 8LTO-21GUR 23 8LTO-23GUR 25 8LTO-25GUR L3 Max D1 Max B1 Max E1 J 16.05 2.48 14.53 24.25 18.26 3.25 .632 .098 .572 .955 .719 .128 16.05 2.48 17.78 26.60 20.62 3.25 .632 .098 .700 1.047 .812 .128 16.05 2.48 21.59 29.00 23.01 3.25 .632 .098 .850 1.142 .906 .128 16.05 2.48 24.77 31.35 24.61 3.25 .632 .098 .975 1.234 .969 .128 16.05 2.48 27.94 33.75 26.97 3.25 .632 .098 1.100 1.329 1.062 .128 16.05 2.48 30.66 39.90 29.36 3.25 .632 .098 1.207 1.453 1.156 .128 15.29 3.24 33.83 40.10 31.75 3.25 .602 .128 1.332 1.579 1.250 .128 15.29 3.24 37.00 43.25 34.93 3.73 .602 .128 1.457 1.703 1.375 .147 15.29 3.24 40.18 46.50 38.10 3.73 .602 .128 1.582 1.831 1.500 .147 Plastic protective caps shell size part numbers caps for receptacles caps for plugs 09 8500-5594 8500-5595 11 8500-5595 8500-5588 13 8500-5598 70205 15 8500-5599 70206 17 8500-5600 70207 19 8500-5601 8500-5589 21 8500-5602 8500-5590 23 8500-5592 8500-5591 25 8500-5593 70602 Gaskets shell size 86 part numbers gasket for receptacles type 0 O ring for receptacle type7 (ordered separately) 09 8599-5541 MS9068-019 11 8599-5542 MS9068-022 13 8599-5543 MS9068-024 15 8599-5544 MS9068-026 17 8599-5545 MS9068-028 19 8599-5546 MS9068-128 21 8599-5547 MS9068-130 23 8599-5548 MS9068-132 25 8599-5549 MS9068-134 4 holes OJ L1 E1 09 L1 Max B1 part numbers OD1 shell size E1 L3 B1 13 8LT Series Rack and panel connectors Mated connector shell size 23 Layout 01 36 1.417 30 1.181 100 3.937 1 O12 SN 2550 -26 HE 308 basic series HE 308 basic series shell type T SN2550 23 -01 P N 7 M * 26 - floating plug for rack, for crimp female contacts, with possibility to mount rear accessory 27 - receptacle for rack, for male contacts with possibility to mount rear accessory class T - sealed shell size - contact layout - please consult us please consult us contact type P - male contact polarization N - normal plating 7 - olive green cadmium S - female contact contractual specification M - DAT quality assurance specification - - connector supplied with contact (without specification) L - connector supplied without contact Through-bulkhead receptacle - pin/socket 9.5/.374 Max 9.5/.374 Max 4 holes OF D shell size OC 09 11 A 13 B E 52.95/2.085 Max 15 17 basic series SN1568-08 T **-** PN SN 7 through bulkhead receptacle class shell size T - sealed 09-11-13-15-17-19-21-23-25 contact layout - please consult us male contact/polarization 19 21 23 25 A Max B Max C Max D E Max F Max 25.40 2.50 14.56 18.26 24.34 3.50 1.000 .098 .573 .719 .958 .138 25.40 2.50 17.81 20.62 26.70 3.50 1.000 .098 .701 .812 1.051 .138 25.40 2.50 21.62 23.01 29.09 3.50 1.000 .098 .851 .906 1.145 .138 25.40 2.50 24.80 24.61 31.47 3.50 1.000 .098 .976 .969 1.239 .138 25.40 2.50 27.97 26.97 33.83 3.50 1.000 .098 1.101 1.062 1.332 .138 25.40 2.50 30.69 29.36 37.04 3.50 1.000 .098 1.208 1.156 1.458 .138 25.10 3.25 33.86 31.75 40.18 3.98 .988 .128 1.333 1.250 1.582 .157 25.10 3.25 37.04 34.93 43.39 3.98 .988 .128 1.458 1.375 1.708 .157 25.10 3.25 40.21 38.10 46.53 3.98 .988 .128 1.583 1.500 1.832 .157 female contact/polarization plating 7 - olive green cadmium 87