74
8LT Series
polarization N- normal
A-B-C-D - see table p 77
contact type P- male S- female
A- male connector supplied less contact or with specific contacts
B- female connector supplied less contact or with specific contacts
contact layout - see table p 120
plating F- nickel
B- olive green cadmium (MIL-C 38999 - HE 308)
shell size 09-11-13-15-17-19-21-23-25
designator - connectors with standard crimp contacts
L- receptacle with long spill (male and female # 22D)
C- receptacle with short spill (male and female # 22D, # 20, # 16)
T- receptacle with male contacts size 20 for wire wrap (2 wraps)
W- receptacle with male contacts size 22 for wire wrap (3 wraps)
shell type 0- square flange receptacle
3- square flange receptacle (rear mounting)
2- square flange receptacle not accepting backshell
7- jam nut receptacle
1- cable connecting receptacle
5- plug with RFI shielding
Applications
High density connectors for all military
and aeronautical purposes.
Description
• High density connector from 1 to
128 contacts
• Sizes 22D, 20, 16, 12, # 16 coax and
# 8 triax
• Bayonet locking system
• 100% scoop proof
Climatic
Temperature range :
- cadmium plating (B) : -65°C +175°C
- nickel plating (F) : -65°C +200°C
Sealing : mated connectors
- differential pressure 2 bars
- leakage 16 cm3/hr
Salt spray to :
MIL STD 1344 method 1001
- 500 hours (version B)
- 48 hours (version F)
NFC 93422
- 48 hours (version F)
Damp heat :
MIL-C 38999 : 10 cycles 24 hrs
NFC 93422 : 56 days
Resistance to fluids
To MIL-C 38999 :
• MIL-L 7808 • MIL-L 23699
• MIL-H 5606 • MIL-A 8243
• MIL-C 25769 • MIL-T 5624 (JP5)
• hydraulic fluids • solvents
To NFC 93422 :
F46 - F54 - 0/180 - H515 - H542 - XH45
Standards
MIL-C 38999 Series I - QPL approved
NFC 93422 HE 308
DTAT-C 5935 X 0005 (HE 308 standard)
GAM/T1 list
Characteristics
Mechanical
Shell : aluminum alloy
Plating :
- olive green cadmium (B)
- nickel (F)
Insulator : thermoplastic
Grommet and seal : silicone elastomer
Contact : copper alloy
Plating : gold over nickel
Endurance : 500 cycles
Shock : 300 g during 3 ms and MIL-S901
grade A
Vibration : sine 10 to 2000 H 30 g random
100 to 300 Hz - 5 (g2/Hz)
Contact retention : (mini force in N)
size 22 D : 45 N size 20 : 67 N
size 16 : 110 N size 12 : 110 N
size 8 : 110 N
basic series 8LT 0 - 13 B 35 P N
Connectors ordering information
FCI Souriau part numbers
Test voltage (Vrms)
Service sea level at 21000 m
M 1300 800
I 1800 1000
II 2300 1000
Contact resistance :
resistance of wire included in measurement :
size 22D : 14.6 msize 20 : 7.3 m
size 16 : 3.8 msize 12 : 1.7 m
Insulation resistance : 5000 M(at 500 Vdc)
Contact rating :
size 22D : 5 A size 20 : 7.5 A
size 16 : 13 A size 12 : 23 A
Shell continuity :
- olive green plating : 2.5 m
- nickel plating : 1 m
Shielding : - 90 dB to 100 MHz
- 50 dB to 10000 MHz
Triaxial contact : # 8
- bandwidth : 0 - 20 MHz
- voltage rating : 500 Vac Max.
125 Vac at 21000 m
- voltage drop :
inner and middle contact 55 mV under 1A
outer contact 75 mV under 12A
Electrical
Note : connectors supplied with standard contacts
75
8LT Series
specification - connector supplied with contact : (without specification)
L- connector supplied without contact
contractual specification
contractual specification
suffix for backshell type 07 only
1- for receptacle type 0 (shells 09 to 25) 2- for receptacle type 7 (shells 09 to 25)
- for plug type 5 (shells 09 to 23) - for plug type 5 (shell 25 only)
MIL-C 38999 part numbers
polarization N- Normal (not included in part number)
A-B-C-D - see table p 77
contact type P- male A- male connector supplied less contact or with specific contacts
S- female B- female connector supplied less contact or with specific contacts
contact layout - see table p 120
plating B- olive green cadmium F- nickel
shell size 09-11-13-15-17-19-21-23-25
class T- with thread for backshell, supplied less backshell
shell type 27466 - square flange receptacle (front mounting)
27656 - square flange receptacle (rear mounting)
27468 - jam nut receptacle
27467 - plug with RFI shielding
basic series MS 27466 T 13 B 35 P
Note : connectors supplied with MIL-C contacts
plating 6- nickel 7 - olive green cadmium
polarization N- normal A-B-C-D - see table p 77
contact type P- male S - female
contact layout - see table p 120
shell size 09-11-13-15-17-19-21-23-25
class T- sealed
shell type 00 - square flange receptacle
07 - jam nut receptacle
06 - plug with RFI shielding
11 - jam nut receptacle with straight spill contacts
basic series HE308 - 00 T 13 - 35 P N 7 M
backshell type 01 - backnut 03 - elbow cable clamp
02 - straight cable-clamp 07 - backshell for screen termination and heatshrink boot
plating B- olive green cadmium F- nickel
shell size 09 11 13 15 17 19 21 23 25
index number 101 102 103 104 105 106 107 108 109
basic series 8LST 103 G 01
HE 308 part numbers
plating 6- nickel 7 - olive green cadmium
designator 1- for receptacle type 0 (shells 09 to 25) 2- for receptacle type 7 (shells 09 to 25)
- for plug type 5 (shells 09 to 23) - for plug type 5 (shell 25 only)
shell size 09-11-13-15-17-19-21-23-25
backshell type 13 - backshell for screen termination and heatshrink boot
basic series HE 308 - 13 13 1 7 M
HE 308 part numbers
Backshells ordering information FCI Souriau part numbers
76
8LT Series
8LT1 - •• B •• cable connecting receptacle
8LT0 - •• B •• HE308-00T •• - •• 7 MS27466T •• B •• square flange receptacle
8LT3 - •• B •• MS27656T •• B •• square flange receptacle (rear mounting)
8LT7 - •• B •• HE308-07T •• - •• 7 MS27468T •• B •• jam nut receptacle
8LT0 - •• F •• HE308-00T •• - •• 6 MS27466T •• F •• square flange receptacle
8LT3 - •• F •• MS27656T •• F •• square flange receptacle (rear mounting)
8LT7 - •• F •• HE308-07T •• - •• 6 MS27468T •• F •• jam nut receptacle
8LT1 - •• F •• cable connecting receptacle
8LT2 - •• B •• square flange receptacle not accepting backshell
8LT2 - •• F •• square flange receptacle not accepting backshell
8LT5 - •• B•• HE308-06T •• - •• 7 MS2746T •• B •• plug with RFI shielding
8LT5 - •• F •• HE308-06T •• - •• 6 MS2746T •• F •• plug with RFI shielding
8LST ••• G01 backnut
8LST ••• G02 HE308-11 •• 27 straight cable clamp
8LST ••• G03 HE308-12 •• 27 elbow cable clamp
8LST ••• B071 HE308-13 •• 17 backshell for screen termination
and heatshrink sleeving
8LST ••• B072 HE308-13 •• 27 backshell for screen termination
and heatshrink sleeving
8LST ••• B01 M85049/27-••W backnut
8LST ••• B02 straight cable clamp
8LST ••• B03 elbow cable clamp
8LST ••• F01 M85049/27-••N backnut
8LST ••• F02 HE308-11 •• 26 straight cable clamp
8LST ••• F03 HE308-12 •• 26 elbow cable clamp
8LST ••• F071 HE308-13 •• 16 backshell for screen termination
and heatshrink sleeving
8LST ••• F072 HE308-13 •• 26 backshell for screen termination
and heatshrink sleeving
8LTE04G •• HE308-B00 •• 7 cap for square flange receptacle
8LTE06G •• HE308-B07 •• 7 cap for jam nut receptacle
8LTE04F •• HE308-B00 •• 6 cap for square flange receptacle
8LTE06F •• HE308-B07 •• 6 cap for jam nut receptacle
8LTF05G •• HE308-B16 •• 7 cap for plug
8LTF07G •• HE308-B06 •• 7 cap for plug
8LTF05F •• HE308-B16 •• 6 cap for plug
8LTF07F •• HE308-B06 •• 6 cap for plug
M39029/58-360 M39029/58-360 male contact # 22D
M39029/58-363 M39029/58-363 male contact # 20
M39029/58-364 M39029/58-364 male contact # 16
M39029/58-365 M39029/58-365 male contact # 12
M39029/56-348 M39029/56-348 female contact # 22D
M39029/56-351 M39029/56-351 female contact # 20
M39029/56-352 M39029/56-352 female contact # 16
M39029/56-353 M39029/56-353 female contact # 12
8599-0988 M39029/90-529 male triaxial contact # 8
8599-0998 M39029/91-530 female triaxial contact # 8
8660-212 MS27488-22 filler plug # 22D
8522-389A MS27488-20 filler plug # 20
8522-390A MS27488-16 filler plug # 16
8522-391A MS27488-12 filler plug # 12
8599-0308 dummy contact # 8
8599-0022 M81969/14-01 plastic tool for contact # 22D
8522-20 M81969/14-10 plastic tool for contact # 20
8522-16 M81869/14-03 plastic tool for contact # 16
8522-12 M81969/14-04 plastic tool for contact # 12
8660-197 tool for contact # 8
Cross reference list : FCI Souriau part numbers, HE 308 and MIL-C 38999 standards
FCI Souriau NFC 93422 / HE 308 MIL-C 38999 Series I Designation
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
77
8LT Series
Polarization
Polarization is determined by the master keyway position. The secondary keyway positions remain fixed.
09 09-35 X 6 95 77 - - 113
09-98 X 3 95 77 - - 113
11-35 X 13 95 81 67 123 109
11-98 X 6 95 81 67 123 109
11 11-01 X 1 95 81 67 123 109
11-05 X 5 95 81 67 123 109
11-04 X 4 95 81 67 123 109
13-35 X 22 95 75 63 127 115
13 13-98 X 10 95 75 63 127 115
13-08 X 8 95 75 63 127 115
15-35 X 37 95 74 61 129 116
15-19 X 19 95 74 61 129 116
15 15-05 X 5 95 74 61 129 116
15-97 X 8 4 95 74 61 129 116
15-18 X 18 95 74 61 129 116
17-35 X 55 95 77 65 125 113
17-26 X 26 95 77 65 125 113
17 17-06 X 6 95 77 65 125 113
17-08 X 8 95 77 65 125 113
17-99 X 21 2 95 77 65 125 113
17-75 X 2 95 77 65 125 113
19-35 X 66 95 77 65 125 113
19 19-32 X 32 95 77 65 125 113
19-11 X 11 95 77 65 125 113
21-35 X 79 95 77 65 125 113
21-41 X 41 95 77 65 125 113
21 21-16 X 16 95 77 65 125 113
21-11 X 11 95 77 65 125 113
21-39 X 37 2 95 77 65 125 113
21-75 4 95 77 65 125 113
23-35 X 100 95 80 69 121 110
23 23-53 X 53 95 80 69 121 110
23-21 X 21 95 80 69 121 110
25-35 X 128 95 80 69 121 110
25-61 X 61 95 80 69 121 110
25-46 X 40 4 2 95 80 69 121 110
25 25-19 X 19 95 80 69 121 110
25-29 X 29 95 80 69 121 110
25-43 X 23 20 95 80 69 121 110
25-24 X 12 12 95 80 69 121 110
Shell size Contacts
layout
Service
MI II
Number of contacts
# 22D # 20 # 16 # 12 # 8
Angles in degrees
NABCD
view from front face of receptacle
view from front face of plug
78
8LT Series
Dimensions
Plug type 5
Backshells
D 1 Max 21.80 25.00 29.00 32.50 35.70 38.50 41.70 44.85 48.00
.858 .984 1.142 1.280 1.406 1.516 1.642 1.766 1.890
L1 Max 31.32 31.32 31.32 31.32 31.32 31.32 31.32 31.32 31.32
1.233 1.233 1.233 1.233 1.233 1.233 1.233 1.233 1.233
D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D3 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93
.274 .412 .526 .651 .776 .882 1.006 1.132 1.257
L2 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30
.445 .445 .445 .445 .445 .445 .445 .445 .445
L3 Max 36.66 36.66 36.66 36.66 36.66 36.66 36.66 36.66 36.66
1.443 1.443 1.443 1.443 1.443 1.443 1.443 1.443 1.443
D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D5
min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10
.055 .055 .094 .220 .220 .346 .469 .594 .594
Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40
.126 .189 .252 .374 .500 .626 .752 .874 1.000
FMax 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45
.828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750
L4 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75
.875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250
L5 Max 47.22 48.02 49.52 55.92 59.42 59.42 59.42 59.42 59.42
1.859 1.891 1.950 2.202 2.339 2.339 2.339 2.339 2.339
D6 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D7
min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30
.126 .157 .189 .217 .252 .311 .374 .406 .563
Max. 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40
.252 .374 .437 .563 .626 .752 .874 .937 1.000
L6 Max. 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78
1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157
L7 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66
1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719
L8 Max 60.68 60.68 62.66 67.03 71.40 71.81 73.79 77.34 80.14
2.389 2.389 2.467 2.639 2.811 2.827 2.905 3.045 3.155
D8 Max 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20
.795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780
D9
min 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80
.272 .378 .500 .583 .705 .783 .909 1.031 1.134
Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90
.276 .382 .504 .587 .709 .787 .913 1.035 1.138
D10 Max 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00
.630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614
L9
type 1 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 -
1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 -
type 2 - - - - - - - - 33.50
- - - - - - - - 1.319
L10 Max 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
.134 .134 .134 .134 .134 .134 .134 .134 .134
L 11 Max 52.22 52.22 52.22 54.22 54.22 55.22 59.02 59.02 59.02
2.056 2.056 2.056 2.135 2.135 2.174 2.324 2.324 2.324
shell size 09 11 13 15 17 19 21 23 25
13.54/.533 Max.
plug backshell assembly overall length
Ø for flange
Ø for flange
Detail A :
sealing boot used
for triaxial 8 Contacts only
Backnut
type 01
Straight
cable-clamp
type 02
Elbow
cable-clamp
type 03
Backshell for
screen termination
and heatshrink boot
type 07
L2
L3
L4
L5
L6
L8
L9
L11
L10
ØD7
ØD2
ØD4
ØD6
ØD8
ØD9
ØD10
L7
ØD5
F
ØD3
L3-L5-L8-L11
L1 ØD1
A
79
8LT Series
Receptacle type 0
B1 Max 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50
.955 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831
E1 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10
.719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500
D1 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18
.572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582
J3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.73 3.73
.128 .128 .128 .128 .128 .128 .128 .147 .147
L1 Max 16.05 16.05 16.05 16.05 16.05 16.05 15.29 15.29 15.29
.632 .632 .632 .632 .632 .632 .602 .602 .602
L2 Max 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49
.531 .531 .531 .531 .531 .531 .531 .531 .531
L3 Max 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24
.098 .098 .098 .098 .098 .098 .128 .128 .128
D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D3 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93
.274 .412 .526 .651 .776 .882 1.006 1.132 1.257
L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30
.445 .445 .445 .445 .445 .445 .445 .445 .445
L5 Max 18.83 18.83 18.83 18.83 18.83 18.83 18.83 18.83 18.83
.741 .741 .741 .741 .741 .741 .741 .741 .741
D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D5
min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10
.055 .055 .094 .220 .220 .346 .469 .594 .594
Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40
.126 .189 .252 .374 .500 .626 .752 .874 1.000
FMax 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45
.828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750
L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75
.875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250
L7 Max 29.39 30.19 31.69 38.09 41.59 41.59 41.59 41.59 41.59
1.157 1.189 1.248 1.500 1.637 1.637 1.637 1.637 1.637
D6 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D7
min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30
.126 .157 .189 .217 .252 .311 .374 .406 .563
Max 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40
.252 .374 .437 .563 .626 .752 .874 .937 1.000
L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78
1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157
L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66
1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719
L10 Max 42.85 42.85 44.83 51.00 53.57 53.98 55.96 59.51 62.31
1.687 1.687 1.765 2.008 2.109 2.125 2.203 2.343 2.453
D8 Max 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20
.795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780
D9
min 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80
.272 .378 .500 .583 .705 .783 .909 1.031 1.134
Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90
.276 .382 .504 .587 .709 .787 .913 1.035 1.138
D10 Max 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00
.630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614
L11
type 1 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60
1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362
type 2 ---------
---------
L12 Max 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
.134 .134 .134 .134 .134 .134 .134 .134 .134
L13 Max 34.39 34.39 34.39 36.39 36.39 37.39 41.19 41.19 41.19
1.354 1.354 1.354 1.433 1.433 1.472 1.622 1.622 1.622
shell size 09 11 13 15 17 19 21 23 25
receptacle backshell assembly overall length
Max. panel thickness 2.50/.098
4 holes ØJ
Ø for flange
Ø for flange
Backshells
Detail A :
sealing boot used
for triaxial 8 Contacts only
Backnut
type 01
Straight
cable-clamp
type 02
Elbow
cable-clamp
type 03
Backshell for
screen termination
and heatshrink boot
type 07
L1
L3
L4
L5
L7
L6
L8
L11
L12
L13
ØD7
L10
ØD2ØD4
ØD6
ØD8
ØD9
ØD10
L9
ØD5
F
ØD3
B1L2
A
ØD1
E1
L5-L7-L10-L13
13.39/.527 Max
80
8LT Series
Receptacle type 3
B1 Max 24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50
.955 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831
E1 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10
.719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500
D1 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18
.572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582
J3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.73 3.73
.128 .128 .128 .128 .128 .128 .128 .147 .147
L1 Max 20.83 20.83 20.83 20.83 20.83 20.83 20.08 20.08 20.08
.820 .820 .820 .820 .820 .820 .791 .791 .791
L2 Max 10.50 10.50 10.50 10.50 10.50 10.50 11.25 11.25 11.25
.413 .413 .413 .413 .413 .413 .443 .443 .443
L3 Max 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24
.098 .098 .098 .098 .098 .098 .128 .128 .128
D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D3 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93
.274 .412 .526 .651 .776 .882 1.006 1.132 1.257
L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30
.445 .445 .445 .445 .445 .445 .445 .445 .445
L5 Max 15.85 15.85 15.85 15.85 15.85 15.85 16.60 16.60 16.60
.624 .624 .624 .624 .624 .624 .654 .654 .654
D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D5
min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10
.055 .055 .094 .220 .220 .346 .469 .594 .594
Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40
.126 .189 .252 .374 .500 .626 .752 .874 1.000
FMax 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45
.828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750
L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75
.875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250
L7 Max 26.40 27.20 28.70 35.10 38.60 38.60 39.40 39.40 39.40
1.039 1.071 1.130 1.382 1.520 1.520 1.551 1.551 1.551
D6 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D7
min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30
.126 .157 .189 .217 .252 .311 .374 .406 .563
Max 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40
.252 .374 .437 .563 .626 .752 .874 .937 1.000
L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78
1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157
L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66
1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719
L10 Max 39.90 39.90 41.90 48.10 50.60 51.00 53.80 57.30 60.10
1.571 1.571 1.650 1.894 1.992 2.008 2.118 2.256 2.366
D8 Max 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20
.795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780
D9
min 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80
.272 .378 .500 .583 .705 .783 .909 1.031 1.134
Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90
.276 .382 .504 .587 .709 .787 .913 1.035 1.138
D10 Max 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00
.630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614
L11
type 1 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60
1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362
type 2 ---------
---------
L12 Max 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
.134 .134 .134 .134 .134 .134 .134 .134 .134
L13 Max 31.40 31.40 31.40 33.40 33.40 34.40 39.00 39.00 39.00
1.236 1.236 1.236 1.315 1.315 1.354 1.535 1.535 1.535
shell size 09 11 13 15 17 19 21 23 25
receptacle backshell assembly overall length
Max. panel thickness 3.00/
.118
4 holes ØJ
13.58/.535 Max.
Ø for flange
Ø for flange
Backshells
Detail A :
sealing boot used
for triaxial 8 Contacts only
Backnut
type 01
Straight
cable clamp
type 02
Elbow
cable clamp
type 03
Backshell for
screen termination
and heatshrink boot
type 07
L1
ØD1
E1
L2
A
B1
L3
L4
L5
L6
L7
L8
ØD6
L9
L10
L11
L12
L13
ØD8
ØD9
ØD10
ØD7
L8
ØD2
ØD4
ØD5
F
ØD3
L5-L7-L10-L13
81
8LT Series
Receptacle type 7
B1 Max 27.35 32.10 35.31 38.49 41.63 46.37 49.58 52.76 55.93
1.077 1.264 1.390 1.515 1.639 1.826 1.952 2.077 2.202
B2 22.35 25.55 30.30 33.45 36.65 39.80 43.00 46.15 50.95
.880 1.006 1.193 1.317 1.443 1.567 1.693 1.817 2.006
D1 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18
.572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582
D2 Max 30.54 35.23 38.40 41.64 44.75 49.53 52.67 55.94 59.02
1.202 1.387 1.512 1.639 1.762 1.950 2.074 2.202 2.324
L1 Max 23.36 23.36 23.36 23.36 23.36 23.36 23.36 23.36 23.36
.920 .920 .920 .920 .920 .920 .920 .920 .920
L2 Max 8.32 8.32 8.32 8.32 8.32 8.32 8.32 8.32 8.32
.328 .328 .328 .328 .328 .328 .328 .328 .328
L3 Max 3.00 3.00 3.00 3.00 3.00 3.79 3.79 3.79 3.79
.118 .118 .118 .118 .118 .149 .149 .149 .149
D3 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D4 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93
.274 .412 .526 .651 .776 .882 1.006 1.132 1.257
L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30
.445 .445 .445 .445 .445 .445 .445 .445 .445
L5 Max 13.66 13.66 13.66 13.66 13.66 13.66 13.66 13.66 13.66
.538 .538 .538 .538 .538 .538 .538 .538 .538
D5 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D6
min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10
.055 .055 .094 .220 .220 .346 .469 .594 .594
Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40
.126 .189 .252 .374 .500 .626 .752 .874 1.000
FMax 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45
.828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750
L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75
.875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250
L7 Max 24.22 25.02 26.52 32.92 36.42 36.42 36.42 36.42 36.42
.954 .985 1.044 1.296 1.434 1.434 1.434 1.434 1.434
D7 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D8
min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30
.126 .157 .189 .217 .252 .311 .374 .406 .563
Max 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40
.252 .374 .437 .563 .626 .752 .874 .937 1.000
L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78
1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157
L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66
1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719
L10 Max 37.68 37.68 39.66 45.83 48.40 48.81 50.79 54.34 57.14
1.483 1.483 1.561 1.804 1.906 1.922 2.000 2.139 2.250
D9 Max 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20
.795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780
D10
min 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80
.272 .378 .500 .583 .705 .783 .909 1.031 1.134
Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90
.276 .382 .504 .587 .709 .787 .913 1.035 1.138
D11 Max 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00
.630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614
L11
type 1 ---------
----- ----
type 2 26.70 26.70 26.70 28.70 28.70 29.70 33.50 33.50 33.50
1.051 1.051 1.051 1.130 1.130 1.169 1.319 1.319 1.319
L12 Max 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
.134 .134 .134 .134 .134 .134 .134 .134 .134
L13 Max 29.22 29.22 29.22 31.22 31.22 32.22 36.02 36.02 36.02
1.150 1.150 1.150 1.229 1.229 1.269 1.418 1.418 1.418
shell size 09 11 13 15 17 19 21 23 25
receptacle backshell assembly overall length
Max. panel thickness 3.18/.125
Ø for flange
Ø for flange
Backshells
Detail A :
sealing boot used
for triaxial 8 Contacts only
Backnut
type 01
Straight
cable clamp
type 02
Elbow
cable clamp
type 03
Backshell for
screen termination
and heatshrink boot
type 07
13.58/.527 Max
L2
L1
L3
L4
L5
L6
ØD5
L6
L7
L8
ØD7
L9
ØD8
L10
L11
ØD9
L12
L13
ØD10
ØD11
ØD6
F
ØD3
ØD4
L5-L7-L10-L13
ØD1
B1
B2
B
ØD2
82
8LT Series
receptacle backshell assembly overall length
Ø for flange
Ø for flange
Backshells
Detail A :
sealing boot used
for triaxial 8 Contacts only
Backnut
type 01
Straight
cable clamp
type 02
Elbow
cable clamp
type 03
Backshell for
screen termination
and heatshrink boot
type 07
Cable connecting receptacle type 1
B1 Max 18.92 22.22 25.62 27.82 31.35 34.62 38.02 42.02 46.50
.745 .875 1.009 1.095 1.234 1.363 1.497 1.654 1.831
E1 22.35 25.65 29.05 31.25 34.65 38.05 41.45 45.45 49.95
.880 1.010 1.144 1.230 1.364 1.498 1.632 1.789 1.967
D1 14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18
.572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582
L1 Max 16.05 16.05 16.05 16.05 16.05 16.05 15.29 15.29 15.29
.632 .632 .632 .632 .632 .632 .602 .602 .602
L2 Max 13.45 13.45 13.45 13.45 13.45 13.45 13.45 13.45 13.45
.530 .530 .530 .530 .530 .530 .530 .530 .530
L3 Max 2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24
.098 .098 .098 .098 .098 .098 .128 .128 .128
D2 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D3 Max 6.96 10.46 13.36 16.53 19.71 22.40 25.56 28.75 31.93
.274 .412 .526 .651 .776 .882 1.006 1.132 1.257
L4 Max 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30
.445 .445 .445 .445 .445 .445 .445 .445 .445
L5 Max 37.36 37.36 37.36 37.36 37.36 37.36 37.36 37.36 37.36
1.471 1.471 1.471 1.471 1.471 1.471 1.471 1.471 1.471
D4 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D5
min 1.40 1.40 2.40 5.60 5.60 8.80 11.90 15.10 15.10
.055 .055 .094 .220 .220 .346 .469 .594 .594
Max 3.20 4.80 6.40 9.50 12.70 15.90 19.10 22.20 25.40
.126 .189 .252 .374 .500 .626 .752 .874 1.000
FMax 21.03 22.63 25.81 28.98 30.56 37.31 37.31 42.06 44.45
.828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750
L6 Max 22.22 22.22 22.22 28.57 28.57 28.57 28.57 31.75 31.75
.875 .875 .875 1.125 1.125 1.125 1.125 1.250 1.250
L7 Max 47.98 48.72 50.22 56.62 60.12 60.12 60.12 60.12 60.12
1.889 1.918 1.977 2.229 2.367 2.367 2.367 2.367 2.367
D6 Max 15.67 18.64 21.79 24.99 28.24 30.94 34.16 37.29 40.46
.617 .734 .858 .984 1.112 1.218 1.345 1.468 1.593
D7
min 3.20 4.00 4.80 5.50 6.40 7.90 9.50 10.30 14.30
.126 .157 .189 .217 .252 .311 .374 .406 .563
Max 6.40 9.50 11.10 14.30 15.90 19.10 22.20 23.80 25.40
.252 .374 .437 .563 .626 .752 .874 .937 1.000
L8 Max 35.32 35.32 37.30 41.67 46.04 46.45 48.43 51.98 54.78
1.391 1.391 1.469 1.641 1.813 1.829 1.907 2.046 2.157
L9 Max 25.40 26.19 27.79 30.96 32.54 34.14 34.93 36.53 43.66
1.000 1.031 1.094 1.219 1.281 1.344 1.375 1.438 1.719
L10 Max 61.38 61.38 63.36 69.53 72.10 72.51 74.49 78.04 80.84
2.417 2.417 2.494 2.737 2.839 2.855 2.933 3.072 3.183
D8 Max 20.20 23.20 26.20 29.20 32.20 35.20 39.20 42.20 45.20
.795 .913 1.031 1.150 1.268 1.386 1.543 1.661 1.780
D9
min 6.90 9.60 12.70 14.80 17.90 19.90 23.10 26.20 28.80
.272 .378 .500 .583 .705 .783 .909 1.031 1.134
Max 7.00 9.70 12.80 14.90 18.00 20.00 23.20 26.30 28.90
.276 .382 .504 .587 .709 .787 .913 1.035 1.138
D10 Max 16.00 18.90 22.10 25.30 28.50 31.50 34.70 37.90 41.00
.630 .744 .870 .996 1.122 1.240 1.366 1.492 1.614
L11
type 1 27.80 27.80 27.80 29.80 29.80 30.80 34.60 34.60 34.60
1.094 1.094 1.094 1.173 1.173 1.213 1.362 1.362 1.362
type 2 ---------
---------
L12 Max 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
.134 .134 .134 .134 .134 .134 .134 .134 .134
L13 Max 52.92 52.92 52.92 54.92 54.92 55.92 59.72 59.72 59.72
2.083 2.083 2.083 2.162 2.162 2.202 2.351 2.351 2.351
shell size 09 11 13 15 17 19 21 23 25
13.39/.527 Max
L1
L3
L4
L5
L6
L7
L8
L10
L11
L12
L13
ØD8
ØD9
ØD10
ØD7
ØD6
L9
ØD2
ØD4
F
ØD5
ØD3
L5-L7-L10-L13
ØD1
L2 B1
ØE1
A
83
8LT Series
Receptacle with straight spill contacts
Max 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06
CM .396 .396 .396 .396 .396 .396 .396 .396 .396
min 9.07 9.07 9.07 9.07 9.07 9.07 9.07 9.07 9.07
# 22D .357 .357 .357 .357 .357 .357 .357 .357 .357
8LT Max 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06 10.06
CF .396 .396 .396 .396 .396 .396 .396 .396 .396
min 8.74 8.74 8.74 8.74 8.74 8.74 8.74 8.74 8.74
.344 .344 .344 .344 .344 .344 .344 .344 .344
L2 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23
CM .403 .403 .403 .403 .403 .403 .403 .403 .403
min 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24
# 22D .364 .364 .364 .364 .364 .364 .364 .364 .364
HE308 Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23
CF .403 .403 .403 .403 .403 .403 .403 .403 .403
min 8.91 8.91 8.91 8.91 8.91 8.91 8.91 8.91 8.91
.351 .351 .351 .351 .351 .351 .351 .351 .351
Max 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23 10.23
#20 - #16 CM and CF .403 .403 .403 .403 .403 .403 .403 .403 .403
8LT HE308 min 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24 9.24
.364 .364 .364 .364 .364 .364 .364 .364 .364
8LT 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70
#22D .028 .028 .028 .028 .028 .028 .028 .028 .028
HE308 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50
ØA .020 .020 .020 .020 .020 .020 .020 .020 .020
#20 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70
.028 .028 .028 .028 .028 .028 .028 .028 .028
#16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15
.045 .045 .045 .045 .045 .045 .045 .045 .045
8LT 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00
PC #22D .157 .157 .157 .157 .157 .157 .157 .157 .157
HE308 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00
.197 .197 .197 .197 .197 .197 .197 .197 .197
L3 PC#20 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00
.197 .197 .197 .197 .197 .197 .197 .197 .197
PC#16 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00
.197 .197 .197 .197 .197 .197 .197 .197 .197
PL#22D 8LT 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50
.335 .335 .335 .335 .335 .335 .335 .335 .335
Max 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08
CM .594 .594 .594 .594 .594 .594 .594 .594 .594
min 13.91 13.91 13.91 13.91 13.91 13.91 13.91 13.91 13.91
#22D .548 .548 .548 .548 .548 .548 .548 .548 .548
8LT Max 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08 15.08
L4 CF .594 .594 .594 .594 .594 .594 .594 .594 .594
min 13.58 13.58 13.58 13.58 13.58 13.58 13.58 13.58 13.58
.535 .535 .535 .535 .535 .535 .535 .535 .535
Max 15.25 15.25 15.25 15.25 15.25 15.25 15.25 15.25 15.25
#20 - #16 CM and CF .600 .600 .600 .600 .600 .600 .600 .600 .600
8LT min 14.08 14.08 14.08 14.08 14.08 14.08 14.08 14.08 14.08
.554 .554 .554 .554 .554 .554 .554 .554 .554
Max 12.47 12.47 12.47 12.47 12.47 12.47 13.22 13.22 13.22
CM .491 .491 .491 .491 .491 .491 .520 .520 .520
min 11.60 11.60 11.60 11.60 11.60 11.60 12.35 12.35 12.35
#22D .457 .457 .457 .457 .457 .457 .486 .486 .486
8LT Max 12.47 12.47 12.47 12.47 12.47 12.47 13.22 13.22 13.22
CF .491 .491 .491 .491 .491 .491 .520 .520 .520
L5 min 11.27 11.27 11.27 11.27 11.27 11.27 12.02 12.02 12.02
.444 .444 .444 .444 .444 .444 .473 .473 .473
Max 12.64 12.64 12.64 12.64 12.64 12.64 13.39 13.39 13.39
#20 - #16 CM and CF .498 .498 .498 .498 .498 .498 .527 .527 .527
8LT min 11.77 11.77 11.77 11.77 11.77 11.77 12.52 12.52 12.52
.463 .463 .463 .463 .463 .463 .493 .493 .493
shell size 252321191715131109
CM : male contact CF : female contact PL : long spill PC : short spill
receptacle type 0 receptacle type 3
L2 L4
L3 L5
L3
ØA
ØA
L3
ØA
receptacle type 7
84
8LT Series
22D W 3 wraps 10.06 16.00
0.396 0.63
20 T2 wraps 10.06 16.00
0.396 0.63
Receptacle with wire wrap contacts
Receptacle type 7 Receptacle type 2
Panel cut-out
square flange receptacle jam nut receptacle
d1 min
type 0 15.70 18.70 21.80 25.00 28.30 31.00 34.20 37.30 40.50
.618 .736 .858 .984 1.114 1.220 1.346 1.469 1.594
type 3 16.66 20.22 23.42 26.59 30.96 32.94 36.12 39.29 42.47
.656 .796 .922 1.047 1.219 1.297 1.422 1.547 1.672
d2 17.70 20.88 25.58 28.80 31.98 35.15 38.28 41.50 44.68
.697 .822 1.007 1.134 1.259 1.384 1.507 1.634 1.759
J3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91
.128 .128 .128 .128 .128 .128 .128 .154 .154
e18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 38.10
.719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500
P16.99 19.53 24.26 27.53 30.68 33.86 37.06 40.01 43.41
.669 .769 .955 1.084 1.208 1.333 1.459 1.575 1.709
shell size 252321191715131109
contact contact A B
size type Max Max
L1 Max
20.83 20.83 20.83 20.83 20.83 20.83 20.08 20.08 20.08
.820 .820 .820 .820 .820 .820 .791 .791 .791
L2 Max
5.55 5.55 5.55 5.55 5.55 5.55 6.30 6.30 6.30
.219 .219 .219 .219 .219 .219 .248 .248 .248
L3 Max
2.48 2.48 2.48 2.48 2.48 2.48 3.24 3.24 3.24
.098 .098 .098 .098 .098 .098 .128 .128 .128
D1
14.53 17.78 21.59 24.77 27.94 30.66 33.83 37.00 40.18
.572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582
D2 Max
9.95 12.90 16.10 19.05 22.20 25.20 28.35 31.50 34.70
.392 .508 .634 .750 .874 .992 1.116 1.240 1.366
B1 Max
24.25 26.60 29.00 31.35 33.75 36.90 40.10 43.25 46.50
.955 1.047 1.142 1.234 1.329 1.453 1.579 1.703 1.831
E1
18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10
.719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500
shell 09 11 13 15 17 19 21 23 25
size
4 holes ØJ
0.86
0.034
A
B
L1
L3
L2
B1
E1
ØD1
ØD2
e
p
Ød1
Ød2
e4ØJ
85
8LT Series
09 21.20 28.00 20.50 29.50 3.20 17.80 76.00 76.00 105.00 105.00 200.00 160.00 160.00
.835 1.102 .807 1.161 .126 .701 2.992 2.992 4.134 4.134 7.874 6.299 6.299
11 24.40 28.00 23.70 29.50 3.20 21.30 76.00 76.00 105.00 105.00 200.00 160.00 160.00
.961 1.102 .933 1.161 .126 .839 2.992 2.992 4.134 4.134 7.874 6.299 6.299
13 28.40 28.00 26.90 29.50 3.20 25.70 89.00 89.00 105.00 105.00 200.00 160.00 160.00
1.118 1.102 1.059 1.161 .126 1.012 3.504 3.504 4.134 4.134 7.874 6.299 6.299
15 31.60 28.00 30.10 29.50 3.20 29.00 89.00 89.00 105.00 105.00 200.00 160.00 160.00
1.244 1.102 1.185 1.161 .126 1.142 3.504 3.504 4.134 4.134 7.874 6.299 6.299
17 35.50 28.00 33.20 29.50 3.20 32.00 89.00 89.00 105.00 105.00 200.00 160.00 160.00
1.398 1.102 1.307 1.161 .126 1.260 3.504 3.504 4.134 4.134 7.874 6.299 6.299
19 37.90 28.00 36.40 29.50 3.20 35.30 89.00 89.00 105.00 105.00 200.00 160.00 160.00
1.492 1.102 1.433 1.161 .126 1.390 3.504 3.504 4.134 4.134 7.874 6.299 6.299
21 41.10 28.00 39.60 29.50 3.20 38.10 102.00 102.00 105.00 105.00 200.00 160.00 160.00
1.618 1.102 1.559 1.161 .126 1.500 4.016 4.016 4.134 4.134 7.874 6.299 6.299
23 44.30 28.00 42.80 29.50 3.20 41.70 102.00 102.00 105.00 105.00 200.00 160.00 160.00
1.744 1.102 1.685 1.161 .126 1.642 4.016 4.016 4.134 4.134 7.874 6.299 6.299
25 47.40 28.00 45.90 29.50 3.20 44.70 102.00 102.00 105.00 105.00 200.00 160.00 160.00
1.866 1.102 1.807 1.161 .126 1.760 4.016 4.016 4.134 4.134 7.874 6.299 6.299
shell A B C D d1 min d2 min L1 L2 L3 L4 L5 L6 L7
size Max Max Max Max
Accessories
Protective caps for receptacles Protective caps for plugs
type 01 type 01
type 02 type 03
type 04 type 05
type 06 type 07
Ød1
Ød2
Ød2
L2
L3
L4
Ød1
B
B
B
B
ØA
ØA
L5
D
ØA
ØA
L6
Ød1
D
ØC
ØC
ØA
L7
D
ØC
L1
Ød1
D
ØC
L1
86
8LT Series
Protective caps
Dummy receptacles
09 8LTO-09GUR 16.05 2.48 14.53 24.25 18.26 3.25
.632 .098 .572 .955 .719 .128
11 8LTO-11GUR 16.05 2.48 17.78 26.60 20.62 3.25
.632 .098 .700 1.047 .812 .128
13 8LTO-13GUR 16.05 2.48 21.59 29.00 23.01 3.25
.632 .098 .850 1.142 .906 .128
15 8LTO-15GUR 16.05 2.48 24.77 31.35 24.61 3.25
.632 .098 .975 1.234 .969 .128
17 8LTO-17GUR 16.05 2.48 27.94 33.75 26.97 3.25
.632 .098 1.100 1.329 1.062 .128
19 8LTO-19GUR 16.05 2.48 30.66 39.90 29.36 3.25
.632 .098 1.207 1.453 1.156 .128
21 8LTO-21GUR 15.29 3.24 33.83 40.10 31.75 3.25
.602 .128 1.332 1.579 1.250 .128
23 8LTO-23GUR 15.29 3.24 37.00 43.25 34.93 3.73
.602 .128 1.457 1.703 1.375 .147
25 8LTO-25GUR 15.29 3.24 40.18 46.50 38.10 3.73
.602 .128 1.582 1.831 1.500 .147
shell part numbers L1 L3 D1 B1 E1 J
size Max Max Max Max
Plastic protective caps
09 8500-5594 8500-5595
11 8500-5595 8500-5588
13 8500-5598 70205
15 8500-5599 70206
17 8500-5600 70207
19 8500-5601 8500-5589
21 8500-5602 8500-5590
23 8500-5592 8500-5591
25 8500-5593 70602
shell size part numbers
caps for receptacles caps for plugs
Gaskets
09 8599-5541 MS9068-019
11 8599-5542 MS9068-022
13 8599-5543 MS9068-024
15 8599-5544 MS9068-026
17 8599-5545 MS9068-028
19 8599-5546 MS9068-128
21 8599-5547 MS9068-130
23 8599-5548 MS9068-132
25 8599-5549 MS9068-134
part numbers
shell size gasket for receptacles type 0 O ring for receptacle type7
(ordered separately)
shell size 09-11-13-15-17-19-21-23-25
plating B- olive green cadmium (MIL-C 38999)
F- nickel
fixing type cap for receptacle cap for plug
01 - plastic sleeved metal cord with eyelet 01 - plastic sleeved metal cord with eyelet
02 - plastic sleeved metal cord with ring 03 - nylon cord without fastener
04 - nylon cord with eyelet 05 - nylon cord with eyelet
06 - nylon cord with ring 07 - nylon cord with strap
cap type E- cap for receptacle F- cap for plug
basic series 8LT E 01 G 13
4 holes ØJ
ØD1
L1
L3L3 B1
E1
B1
E1
87
8LT Series
Rack and panel connectors
36
1.417
Mated connector shell size 23 Layout 01
1 Ø12 SN2550
100
3.937
30
1.181
Through-bulkhead receptacle - pin/socket
09 25.40 2.50 14.56 18.26 24.34 3.50
1.000 .098 .573 .719 .958 .138
11 25.40 2.50 17.81 20.62 26.70 3.50
1.000 .098 .701 .812 1.051 .138
13 25.40 2.50 21.62 23.01 29.09 3.50
1.000 .098 .851 .906 1.145 .138
15 25.40 2.50 24.80 24.61 31.47 3.50
1.000 .098 .976 .969 1.239 .138
17 25.40 2.50 27.97 26.97 33.83 3.50
1.000 .098 1.101 1.062 1.332 .138
19 25.40 2.50 30.69 29.36 37.04 3.50
1.000 .098 1.208 1.156 1.458 .138
21 25.10 3.25 33.86 31.75 40.18 3.98
.988 .128 1.333 1.250 1.582 .157
23 25.10 3.25 37.04 34.93 43.39 3.98
.988 .128 1.458 1.375 1.708 .157
25 25.10 3.25 40.21 38.10 46.53 3.98
.988 .128 1.583 1.500 1.832 .157
shell size A
Max
B
Max
C
Max
D E
Max
F
Max
plating 7- olive green cadmium
female contact/polarization
male contact/polarization
contact layout - please consult us
shell size 09-11-13-15-17-19-21-23-25
class T - sealed
through bulkhead receptacle
basic series
SN1568-08 T ••-••
PN SN
7
9.5/.374 Max 9.5/.374 Max
52.95/2.085 Max E
4 holes ØF D
ØC
AB
specification -- connector supplied with contact (without specification)
L- connector supplied without contact
contractual specification M - DAT quality assurance
plating 7- olive green cadmium
polarization N- normal
contact type P- male contact S - female contact
contact layout - please consult us
shell size -please consult us
class T-sealed
shell type 26 - floating plug for rack, for crimp female contacts,
with possibility to mount rear accessory
27 - receptacle for rack, for male contacts with
possibility to mount rear accessory
basic series
HE 308 basic series SN 2550 -26 T 23 -01 P N 7 M
HE 308