______________________________________________________________________________________________________________________________ 1 of 3
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
AC Input 100-240Vac +/- 10%, 47-63 Hz 1
80-270 Vac, 47-440 Hz operational
500 ms max at 120 Vac
0.75A @ 120 Vac, 0.45 A @ 240 Vac
25 ms minimum at 45 W, nominal input (120Vac)
Average over half cycle
37A max., 264 Vac
110-160%, auto-reset
F1, F2: 1.6A, 250Vac fuses provided internally
Hiccup Mode, 58W typical
Complies with EN61000-3-2, Class A
Hiccup Mode, 58W typical
88% typical
Overtemperature Protection
Self-Recovering
Output Power 45 W continuous. See chart for operation above 50
C
CSA/EN/IEC/UL 60601-1, 3
Edition
Methods Of Protection: 2 MOPP for Type BF Applications
50 W for 1 minute, 10% duty cycle
CSA/EN/IEC/UL 60950-1, IEC 2
Edition
See page 2 for detailed safety agency standards
1% pk-pk max., 20 MHz BW, differential mode
Measured with noise probe directly across output terminals
Input-Output: 4500Vac, Input-Ground: 1900Vac
Output-Ground: 1900Vac
See chart
12V-28V models:
120Vac:
30µA NC/70µA SFC
264Vac: 75µA NC/130µA SFC
48V model: 120Vac: 90µA NC/120µA SFC
264Vac: 200µA NC/300µA SFC
Not adjustable
Factory set with fixed resistors for higher reliability
Operating Temperature -20
to 70
C
See derating chart
Not required
Derate output power by 2.5%
per °C above 50°C, up to 70°C max
See chart
Storage Temperature -40 to +85
C
500µs max. to 1%, 50% load step
0.2A/µs, 3.5% deviation. typical
5% to 95%, non-condensing
Fixed 65 kHz, typical
300K hours per Telcordia
MINT1045
45 W Single Output Series
Medical & ITE – Universal Input Power Supply 3 Year Warranty
•
45 W Convection Cooled
•
Universal Input 80--270 Vac
•
Very Small Size: 2” W x 3” L x 1.0” H
•
88% Efficiency Typical
•
Class I or Class II AC Input Applications
•
CSA/EN/IEC/UL60601-1 3
rd
Edition for Medical,
BF Rated (2 MOPP), Ultra-low Leakage Current
•
CSA/EN/IEC/UL60950-1 2
nd
Edition for ITE
Specifications
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
Model Number Key
12
Output Voltage: "12" = 12V output, "24" = 24V output, etc.
75
"75" = Output Connector - 4 pin header
MINT
"K" = Input Connector - 3 pin header
01
01 = Standard Model, 02 and higher indicates a modified m odel.
Product Family: "M" = Medical, "I" = Internal, "NT" = New Technology
1
045
Output Pow er (Watts) - "045" = 45W
A
Model Configuration: "A" = Class I Input; "B" = Class II Input (no ground)
K