F-219 TMM-116-02-F-S TMM-108-01-T-D TMM-108-03-F-Q TMM-112-01-L-D-RA (2.00 mm) .0787" TMM SERIES LOW-PROFILE THROUGH-HOLE HEADER Single, double and quad row Board Mates: CLT, SQT, SQW, ESQT, TLE, SMM, MMS SPECIFICATIONS For complete specifications see www.samtec.com?TMM Cable Mates: TCSD Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (SMM/TMM): 3.2 A per row (2 pins powered) Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold Voltage Rating: 281 VAC mated with SQW; 250 VAC mated with SQT RoHS Compliant: Yes Lead-Free Solderable: Yes Ultra-low profile (1.50 mm) .059" 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES Note: Some lengths, styles and options are non-standard, non-returnable. Choice of five lead styles APPLICATION APPLICATIONS SQT TMM (2.00 mm) .0787" pitch (2.00 mm) .0787" RECOGNITIONS HORIZONTAL Retention Clip Option (-RC) For complete scope of recognitions see www.samtec.com/quality TMM 1 NO. PINS PER ROW LEAD STYLE PLATING OPTION Specify LEAD STYLE from chart below. = Gold flash on post, Matte Tin on tail ROW OPTION OTHER OPTION -S -RA & -RE FILE NO. E111594 ALSO AVAILABLE (MOQ Required) 01 thru 50 * Other platings Other Solutions (1.97) .078 No. of positions x (2.00) .0787 Press-fit LEAD STYLE A Elevated 50 01 -02 02 100 - 03 (3.94) .155 See TW Series. Highdensity See TMMH Series. 01 99 - 05 04 200 - 06 (6.00) .236 Shrouded Four Row Vertical & Right-Angle C (8.20) (3.70) (3.00) .323 .146 .118 (4.00) (2.70) .158 .106 (1.91) (5.69) .224 .075 (2.29) (5.43) (1.65) .090 .214 .065 (9.58) (3.20) (4.88) .377 .126 .192 - 04 = Single Row = Double Row -Q = 10 " (0.25 m) Gold on post, Matte Tin on tail = Four Row -RC -S = 30 " (0.76 m) Gold on post, Matte Tin on tail -T = Matte Tin (3.05) .120 (3.20) .126 (2.00) .0787 -"XXX" (1.27) .050 -RC 197 (0.50) .020 SQ (1.50) .059 D C -S = Polarized Position (Specify position of omitted pin) (3.05) .120 (3.20) .126 B A (2.00) .0787 (2.00).0787 -Q -RA (3.05) .120 (2.00) .0787 See TMMS Series. Paste In Hole (PIH) processing. Contact Samtec ASP Group for part customization. = Retention Clip (Mates with TCSD) (Double row only, 4 positions minimum, only available -06 lead style) (8.00) .315 01 = Right-angle (Lead Style -01 only) (2 positions minimum, -Q row) -D -L (3.20) (3.50) .126 .138 - 01 See PTT Series. B -F -D -Q -RA & -RE Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (2.00) .0787 OPTION D - RA (1.27) .050 (3.56) .140 -RE