3MTM Metal-out Static Shielding Bag SCC 1500
SCC 1500 Metal-out Static Shielding Bag
STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP
ITEM
NUMBER
150(W”)(L”) 1101-B
98-0799-1066-1
DATASHEET
PRODUCT
Static Shielding Bag - Metal-out
Sizes on Page 2
3M SCC 1500 metal-out static shielding bags are approved by major electronics manu-
facturers for use worldwide. Our transparent, metallized static shield bag structure is
desinged to provide a static safe environment for sensitive electronic devices. This bag
also provides low charge retention and rapid static decay. Bags are lot coded for QC
traceability. These bags are tested to meet or exceed certain electrical and physical
requirements of ANSI/ESD S541, EIA 625, and to be ANSI/ESD S20.20 program compli-
ant.
Specifications
Physical Properties: Typical Values Test Method*
Thickness 3 mils** MIL-STD-3010 1003
Tensile Strength 7700 PSI ASTM D882
Seam Strength >10 lbs ASTM D882
Heat Sealing Conditions:
Temperature 300oF - 400oF
Time 0.6 - 4.5 seconds
Pressure 30 - 70 PSI
Electrical Properties:
Surface Resistivity / Resistance ASTM D257 or ANSI/ESD STM11.11
Interior <1012 ohms/square or <1011 ohms
Exterior <1012 ohms/square or <1011 ohms
Metal 100 ohms
Charge Retention <100 volts CPM
Static Shielding < 30 volts EIA 541
Static Shielding < 10 nJ ANSI/ESD STM11.31
Static Decay < 2 seconds MIL-STD-3010 4046
Silicone or Amine Content Not detected FTIR
** tolerance +/-15%
See 3M Data Sheets for these related items:
Humidity Indicator Cards (HIC’s)
Desiccant
Vacuum Sealers
Important Notice
All statements, technical information, and recommendations related to
3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this prod-
uct, you must evaluate it and determine if it is suitable for your intend-
ed application. You assume all risks and liability associated with such
use. Any statements related to the product which are not contained in
3M’s current publications, or any contrary statements contained on
your purchase order shall have no force or effect unless expressly
agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for one year from time of purchase. 3M MAKES NO OTHER WAR-
RANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period stat-
ed above, your exclusive remedy shall be, at 3M’s option, to replace or
repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any indi-
rect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
*This product is not on the Qualified Product Listing under the
Defense Standardization Program.
PRODUCT DATA SHEET
Material Structure
3M SCC 1500 flat and ZipTop static
shielding bags are manufactured using a
proprietary top coating. The top coating
and metal layer provide low charge
retention and Faraday Effect shielding
of an Electrostatic Discharge (ESD) with
the associated electrostatic fields.
Polyester dielectric stops the current
from ESD. Tribocharging is minimized
by the specially processed polyethylene.
ZipTop Reclosable
Open Top
ALUMINUM SHIELD
POLYESTER
STATIC
DISSIPATIVE
POLYETHYLENE
ABRASION RESISTANT
COATING
3M is a trademark of 3M Company.
All other trademarks herein are the property
of their respective owners.
3M Electronic Solutions Division
6801 River Place Blvd
Austin, TX 78726-9000
US and Canada: 866-722-3736
Fax: 866-722-3735
Intl: 919-718-0000; Fax: 919-774-8174
email: 3Mstaticinfo@mmm.com; www.3Mstatic.com © 3M 2012. All rights reserved.
3MTM Metal-out Static Shielding Bag SCC 1500
Static Shielding Bag - open top
W"x L" P/N W"x L" P/N W"x L" P/N
3 x 5 15035 12 x 16 1501216
4 x 6 15046 8 x 12 150812 12 x 18 1501218
5 x 8 15058 9 x 12 150912 14 x 18 1501418
6 x 8 15068 10 x 12 1501012 15 x 18 1501518
6 x 10 150610 10 x 14 1501014 16 x 24 1501624
6 x 30 150630 10 x 24 1501024 18 x 18 1501818
7 x 15 150715 11 x 15 1501115 18 x 24 1501824
All standard sizes in-stock/same day shipment.
Width is measured from inside seam to inside seam.
Length is measured from the top edge to the bottom fold.
Opening is in the “width” dimension.
Custom bag sizes, custom printing, and custom hot
stamping are available.
Most sizes are packed 100 per case.
Small sizes are packed 1000 or 500 per case.
SCC 1500 Metal-out Static Shielding Bag
PRODUCT DATA SHEET
STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP
ITEM
NUMBER
150(W”)(L”) 1101-B
98-0799-1066-1
DATASHEET
PRODUCT
3M SCC 1500 ZipTop3M SCC 1500 Open Top
W"x L" P/N W" x L" P/N W" x L" P/N
3 x 5 150Z35 5 x 8 150Z58 8 x 10 150Z810
4 x 4 150Z44 6 x 8 150Z68 10 x 12 150Z1012
4 x 6 150Z46 6 x 10 150Z610 12 x 18 150Z1218
OPENING
SEAL
FOLD
LENGTH
WIDTH
SEAM
WIDTH
OPENING
SEAL
FOLD
ZIPTOP
LENGTH
WIDTH
SEAM
WIDTH
3MTM Metal-out Static Shielding Bag SCC 1500
Static Shielding Bag - ZipTop Reclosable
1”
3M is a trademark of 3M Company.
All other trademarks herein are the property
of their respective owners.
3M Electronic Solutions Division
6801 River Place Blvd
Austin, TX 78726-9000
US and Canada: 866-722-3736
Fax: 866-722-3735
Intl: 919-718-0000; Fax: 919-774-8174
email: 3Mstaticinfo@mmm.com; www.3Mstatic.com © 3M 2012. All rights reserved.
