Drawings are actual size. 29 RG-59/U TYPE CABLE CONNECTORS !GF-59F-AHS TYPE : ae Part Number Thread Flats Figure Part Number Thread Flats Figure GF-59F-AHS/290 None 1 GF-59F-AHS/312 None 1 GF-59F-AHS/290SD Single D 2 GF-59F-AHS/312SD Single D 2 GF-59F-AHS/290DD Double D 2 GF-59F-AHS/312DD Double D 2 NS-3038-1 t Double D 2 * Brass body and beryllium copper contact assures reliable electrical performance * Chromate conversion coating over cadmium plating on body provides good corrosion resistance Tin plating available as an option - add SN to part number Excellent for use in equipment where a cable passes through a panel See Appendix, Figure 2 or 3, for D flat panel cutouts See Appendix, Figure 10, for cable trim dimensions Use .324 hex crimp (see page 63) + Left hand threads, .290 ID crimp ring ACCEPTS ACCEPTS 1 @ 15 6 DIELECTAIC ACCEPTS 020 - 047 @ a8 CTR. COND. 3/8 8 76 HEX 3/8 - 32 THD 7HN6 HEX AB 1.42 FIGURE 1 FIGURE 2 GF-59RA-AHS TYPE GF-59RA-AHS/290 GF-59RA-AHS/342 GF-59RA-AHS/312 NS-3542-21 * 90 design is very useful on wall outlets, head ends Bright acid tin plating on contact provides good electrical contact for many mating cycles Excellent for wall outlet applications - no other connector is needed inside the wall plate DIELECTRIC D FLAT ACCEPTS 020 - 047 CTR. COND. 3/8 - 32 THD 1.42 ____aj and inside equipment where space is limited me Brass body 49 Phosphor bronze contact rt 4-4 Bright acid tin plating on contact 4 318 * Chromate conversion coating over np LF t cadmium plating on body + 5 me HEX ACCEPTS * Tin plating available as an option - add SN to part number * Use .324 hex crimp See Appendix, Figure 10, for cable trim dimensions 1/2 - 28 threads, .290 ID crimp ring NOTE. See page 33 through 36 for Teflor plenum cable connectors and page 63 for crimp tool selection. 025 ole DIELECTRIC 3/8 - 32 THO AC GILBERT ENGINEERING CO,, INC. POST OFFICE BOX 23189 5310 W. CAMELBACK ROAD TEL: 602-245-1050 PHOENIX, AZ 85063-3189 USA GLENDALE, AZ 85301-7597 USA TEL: 800-528-5567 FAX: 602-931-0684 FAX: 800-344-6358