T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59SURKCGKC Hyper Red Green Features Description z Uniform light output. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z 3 leads with one common lead. The Green source color devices are made with AlGaInP on z Long life-solid state reliability. GaAs substrate Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 1 OF 7 ERP: 1101005940 Selection Guide Part No. Dice Hyper Red (AlGaInP) L-59SURKCGKC Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Water Clear Green (AlGaInP) Min. Typ. 1800 2800 450 900 21/2 24 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Green 630 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 2 OF 7 ERP: 1101005940 L-59SURKCGKC Hyper Red SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 3 OF 7 ERP: 1101005940 Green SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 4 OF 7 ERP: 1101005940 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu L-59SURKCGKC DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 5 OF 7 ERP: 1101005940 SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 6 OF 7 ERP: 1101005940 SPEC NO: DSAB8511 REV NO: V.11 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/07/2010 DRAWN: F.F.Zhou PAGE: 7 OF 7 ERP: 1101005940