MBRF1090CT & MBRF10100CT Vishay General Semiconductor Dual Common-Cathode High-Voltage Schottky Rectifier FEATURES * Guardring for overvoltage protection * Lower power losses, high efficiency * Low forward voltage drop * High forward surge capability * High frequency operation * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ITO-220AB 1 PIN 1 2 3 PIN 2 TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. PIN 3 MECHANICAL DATA Case: ITO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 5.0 A x 2 VRRM 90 V, 100 V IFSM 120 A VF 0.75 V TJ max. 150 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER SYMBOL MBRF1090CT MBRF10100CT UNIT Maximum repetitive peak reverse voltage VRRM 90 100 V Working peak reverse voltage VRWM 90 100 V Maximum DC blocking voltage VDC 90 100 V IF(AV) 10 5.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 120 A Peak repetitive reverse current per diode at tp = 2 s, 1 kHz IRRM 0.5 A Maximum average forward rectified current at TC = 105 C total device per diode Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage from terminal to heatsink with t = 1 min dV/dt 10 000 V/s TJ, TSTG - 65 to + 150 C VAC 1500 V ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 5.0 A IF = 5.0 A Maximum reverse current per diode at working peak reverse voltage (1) SYMBOL MBRF1090CT MBRF10100CT UNIT TC = 125 C TC = 25 C VF 0.75 0.85 V TJ = 25 C TJ = 100 C IR 100 6.0 A mA Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle Document Number: 88681 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 MBRF1090CT & MBRF10100CT Vishay General Semiconductor THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance per diode MBRF1090CT RJC MBRF10100CT UNIT 6.8 C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE ITO-220AB MBRF10100CT-E3/45 1.99 45 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 10 Instantaneous Forward Current (A) Average Forward Current (A) Resistive or Inductive Load 8 6 4 2 0 10 TJ = 100 C TJ = 175 C 1 TJ = 25 C 0.1 0.01 50 0 100 150 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Case Temperature (C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics Per Diode 100 Instantaneous Reverse Current (mA) 120 Peak Forward Surge Current (A) TJ = 150 C TJ = TJ Max. 8.3 ms Single Half Sine-Wave 100 80 60 40 20 TJ = 150 C 10 TJ = 125 C 1 TJ = 100 C 0.1 0.01 TJ = 25 C 0.001 0.0001 0 1 10 100 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 4. Typical Reverse Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88681 Revision: 08-Nov-07 MBRF1090CT & MBRF10100CT Vishay General Semiconductor 1000 Junction Capacitance (pF) Transient Thermal Impedance (C/W) 100 10 1 0.1 0.01 100 10 1 0.1 1 10 0.1 1 10 100 t - Pulse Duration (s) Reverse Voltage (V) Figure 5. Typical Transient Thermal Impedance Per Diode Figure 6. Typical Junction Capacitance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.076 (1.93) REF. 45 REF. 7 REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) PIN 1 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7 REF. 0.350 (8.89) 0.330 (8.38) 3 7 REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) Document Number: 88681 Revision: 08-Nov-07 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1