15676 DieLabs.qxp 2/10/06 1:48 PM Page 12 C11 0505 FUNCTIONAL APPLICATIONS BENEFITS Impedance Matching D.C. Blocking Bypass Coupling Tuning and Feedback Oscillators Timing Circuits Filters RF Power Amplifiers and Delay Lines Stable TC, -55 to +125 C Operating Range Dielectric Laboratories Mechanical Specification Laser marking available in Horizontal and Vertical orientation. Codes L, V, D. The MS material system is available in Z termination only. U termination is not available in the UL material system. Capacitance Table *AH, CF, and UL capacitors in the cap range from 33pF to 56pF are 200V rated, Code 6. Cap values shown in red are available in MS only, in blue are available in AH, CF, and UL only. **MS capacitors in the range from 62pF to 100pF are 150V rated, Code 8. Electrical Specifications Note: Dissipation Factor applies to values of 4.7pF or greater. 12 www.dilabs.com 15676 DieLabs.qxp 2/13/06 3:29 PM Page 13 C11 0505 20 Pieces Each of 30 Values CODE 0R3 0R5 1R0 1R2 1R5 1R8 2R0 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 CAP 0.3pF 0.5pF 1.0pF 1.2pF 1.5pF 1.8pF 2.0pF 2.2pF 2.7pF 3.3pF 3.9pF 4.7pF 5.6pF 6.8pF 8.2pF 10pF 12pF 15pF 18pF 22pF 27pF 33pF 39pF 47pF 56pF 68pF 82pF 100pF C08BLBB1X5UX 2400pF Block C11 DESIGNER KIT KIT C 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 KIT D 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R1 KIT E 5R6 6R8 8R2 100 120 150 180 220 270 330 KIT F 270 330 390 470 510 560 620 680 820 101 Dielectric Laboratories C11 ENGINEERING KIT DLI reserves the right to substitute values as required. Customer may request particular cap value and material for sample kit to prove designs. www.dilabs.com 13