a es Graphic 240x128dots WG240128A QNmoension drawing WINSTAR Professional LCD Module Manufacture 14.0 MAX 7.8 1.6 TH 0.5 | 0.47 giai- Ic 2) <|< = 2| SEE 5 ne ne vO ofS wy lis So S | DOT SIZE 130.0+10.0 5 | XHP-3(JWT) P/N number CCFL B/L VA | is effective area of LCD. VA II is window of bezel. Feature Mechanical Data 1. Built-in controller TOSHIBA-(T6963C ) 2.1/240duty cycle Item Standard Value Unit 3. Built-in N/V (option) ; Module Dimension 170.0x93.0 mm ae Symbol Function Viewing Area 132.0x76.0 mm Dot Size 0.47x0.47 mm 1 -FGND Frame GEN(connected to bezel) t Dot Pitch 0.5x0.5 mm 2 Vss GND Mounting hole 162.0x 85.0 mm 3 Vdd Power supply for logic circuit : Absolute Maximum Ratis. 4 VO Contrast Adjustment 7 5 WR _ Data write Standard Value Item Symbol Unit 6 RD Data read min.| typ. | max. 7 CE Chip enable Power Supply VDD-VSS |4.75 5.0 |5.25| Vv 8 C/D Code/Data Input Voltage VI -0.3 --- voo| V 9 NC/Vee No connection/Negative Voltage outpuy "Note V8S=0 Volt, VOD=5.0 Volt. 10e RST Controller reset Electronical Characterfsties 11 | DBO Data bus line i symball Gonaiti Standard Value) 12 DB1 Data busline Ee me onan Tin. typ. max. Unit 13 DB2 Data bus line Input Voltage "EE ar SeNpoi| nes Voo | . VIO H level os --- | 0.3Vop 14 DB3 Data bus line Supply Current | IDD VDD=5V = 23 -- | mA 15 DB4 Data bus line Recommended LC Driving oc 19.1) 19.5 | 20.1 16 DBS Data busline Voltage for Normal Temp. yop-vo 25C 18.1 485 i941 V 17 DB6_ Data busline Version module 50C 17.1 17.5 | 18.1 18 DB7 _ Databusline LED Forward Voltage) VF 25C - | - | = fy FS="H",6x8 character font ei arn nen _ A 13 FS Font selection FS="L",8x8 character font PE ramen ulrent IF ee m VE 25C =| 325 | 580 |[Vms 20 RV Reverse ECF IF 25C = =| 5.0 | mA EL TEL Vel=110VAC;400Hz as 5.0 mA