DESIGNED & DIMENSIONED IN MILLIMETERS REVISION J MPS-XX-X.XX-XX-X-V-XX C DO NOT SCALE FROM THIS PRINT 5.00 .197 REF (TYP) LEAD STYLE -7.70 * -9.70 (SEE TABLE 1) 01 CL * = NOT TOOLED ** = NOT RELEASED FOR PRODUCTION MPS-06-7.70-01-X-V SHOWN C 5.08 .200 REF (TYP) +.002 1.47 - 0.13 .058 - .005 "B" 1.27 .050 REF "C" REF "B" REF "B" 1.88 .074 (TYP) CHECK BOW ON THIS SURFACE (SEE NOTE 5) C (No OF POS X 5.00[.197]) - 3.12[.123] MPS-XX-XX.XX-V 2.50 .098 REF CL C PLATING SPECIFICATION -L: SEE TABLE 2 -T: SEE TABLE 2 FIG. 1 (No OF POS x 5.00[.197]) + 7.55[.297] REF 0.41 .016 REF (TYP) VERTICAL TAIL LENGTH -01: FOR 1.57[.062] THICK PCB (USE SUB-C-214-XX.XX-01-X) * -02: FOR 3.18[.125] THICK PCB (USE SUB-C-214-XX.XX-02-X) 03: FOR 2.36 [.093] THICK PCB (USE SUB -C-214-XX.XX-03-X) 10.16 .400 "A" REF "A" +0.05 OPTION -LC: LOCKING CLIP (USE LC-07-TM) (SEE FIG. 2, SHT 2) ** -HS: HOT SWAP (SEE FIG. 3, SHT 2) No OF POSITIONS -02, -04, -06, -08 (No OF POS-1) x 5.00[.197] 0.38 .015 REF C SUB-C-214-XX.XX-XX-X +0.25 "A" - 0.50 (No OF POS x 5.00[.197]) + 2.64[.104] REF 2.54 .100 1.00 .039 REF 0.79 .031 REF (TYP) SECTION "A"-"A" SECTION "B"-"B" 2.54 .100 REF (TYP) J J * = NOT TOOLED ** = NOT RELEASED FOR PRODUCTION NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. BURR ALLOWANCE: 0.038[.0015] MAX. 3. MINIMUM PUSHOUT FORCE: 4.45N[1.0 LB]. 4. PARTS TO BE PACKAGED IN TRAYS. 5. BOW ALLOWED AT 0.002 MM/MM [.002 IN/IN]. 6. MINIMUM -LC PULL OUT FORCE: 2.23 N [0.5 LB] 7. PARTS TO BE PACKAGED IN TRAYS. F:\DWG\MISC\MKTG\MPS-XX-X.XX-XX-X-V-XX-MKT.SLDDRW UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. TOLERANCES ARE: DECIMALS ANGLES .X: 0.3 [.01] 2 .XX: 0.13 [.005] .XXX: 0.051 [.0020] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: LCP, COLOR: BLACK CONTACT: COPPER ALLOY SHEET SCALE: 1.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: VERTICAL MINI-POWER SOCKET DWG. NO. MPS-XX-X.XX-XX-X-V-XX BY: BRATCHER 2/15/2007 SHEET 1 OF 2 REVISION J FIG. 2 MPS-06-7.70-01-X-V-LC SHOWN (SAME AS FIG. 1, UNLESS OTHERWISE STATED) CL LC-07-TM MPS-XX-XX.XX-V-LC +0.20 C 2 MAX SWAY (TYP) 1.42 .056 REF (TYP) +.008 1.42 - 0.13 .056 - .005 (2 PLCS) 0.25 .010 REF (TYP) C FIG. 3 (No OF POS x 5.00[.197]) + 2.64[.104] MPS-06-7.70-01-X-V-LC-HS SHOWN (SAME AS FIG. 2, UNLESS OTHERWISE STATED) 2.16 .085 REF "D" "D" 0.25 .010 REF 1.00 .039 REF 2.70 .106 C-302-XX.XX-XX-X SECTION "D"-"D" C-214-XX.XX-XX-X PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 F:\DWG\MISC\MKTG\MPS-XX-X.XX-XX-X-V-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: VERTICAL MINI-POWER SOCKET DWG. NO. MPS-XX-X.XX-XX-X-V-XX BY: BRATCHER 2/15/2007 SHEET 2 OF 2