Order this document by MBR0520LT1/D SEMICONDUCTOR TECHNICAL DATA Motorola Preferred Devices Plastic SOD-123 Package The Schottky Power Rectifier employs the Schottky Barrier principle with a barrier metal that produces optimal forward voltage drop-reverse current tradeoff. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. This package provides an alternative to the leadless 34 MELF style package. These state-of-the-art devices have the following features: * Guardring for Stress Protection * Very Low Forward Voltage (0.38 V Max @ 0.5 A, 25C) * 125C Operating Junction Temperature * Epoxy Meets UL94, VO at 1/8 * Package Designed for Optimal Automated Board Assembly SCHOTTKY BARRIER RECTIFIER 0.5 AMPERES 20 VOLTS Mechanical Characteristics * Reel Options: MBR0520LT1 = 3,000 per 7 reel / 8 mm tape. Reel Options: MBR0520LT3 = 10,000 per 13 reel / 8 mm tape. * Device Marking: B2 * Polarity Designator: Cathode Band * Weight: 11.7 mg (approximately) * Case: Epoxy, Molded * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds CASE 425-04, Style 1 SOD-123 MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 20 Volts Average Rectified Forward Current (Rated VR) TL = 90C IF(AV) 0.5 Amps Non-repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 5.5 Amps Storage Temperature Tstg - 65 to +125 C TJ - 65 to +125 C dv/dt 1000 V/s Thermal Resistance -- Junction to Ambient (1) RJA 340 C/W Thermal Resistance -- Junction to Lead RJL 150 C/W Operating Junction Temperature Voltage Rate of Change (Rated VR) THERMAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (2) (iF = 0.1 Amps) (iF = 0.5 Amps) Maximum Instantaneous Reverse Current (2) (VR = 10 V) (Rated dc Voltage = 20 V) VF IR TJ = 25C TJ = 100C 0.300 0.385 0.220 0.330 TJ = 25C TJ = 100C 75 A 250 A 5 mA 8 mA Volts mA (1) FR-4 or FR-5 = 3.5 x 1.5 inches using the Motorola minimum recommended footprint. (2) Pulse Test: Pulse Width = 300 s, Duty Cycle 2%. Preferred devices are Motorola recommended choices for future use and best overall value. Rev 2 Device Rectifier Motorola, Inc. 1996 Data 1 10,000 1 TJ = 100C 75C 25C I R, REVERSE CURRENT ( A) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) MBR0520LT1 - 25C 0.1 0.01 0.1 0.2 0.3 0.4 VF , INSTANTANEOUS FORWARD VOLTAGE (VOLTS) TJ = 100C 1000 75C 100 0.5 5 0 Figure 1. Typical Forward Voltage I R, REVERSE CURRENT ( A) 100 C, CAPACITANCE (pF) 150 100 50 0 5 10 15 20 VR, REVERSE VOLTAGE (VOLTS) 1 - 25C 0.1 0.01 25 TJ = + 25C 10 5 0 P F(AV), AVERAGE POWER DISSIPATION (WATT) AVERAGE FORWARD CURRENT (AMP) 1 0.875 DC 0.75 0.625 IPK = = SQUARE WAVE IAV 0.5 5 0.375 10 0.25 20 0.125 0 60 67 74 95 102 109 81 88 LEAD TEMPERATURE (C) 116 Figure 5. Current Derating (Lead) 10 15 20 VR, REVERSE VOLTAGE (VOLTS) 25 Figure 4. Typical Reverse Current Figure 3. Typical Capacitance 2 25 Figure 2. Typical Reverse Current 200 0 10 15 20 VR, REVERSE VOLTAGE (VOLTS) 123 130 0.35 0.315 TJ = 125C 0.28 SQUARE WAVE 0.245 IPK IAV 0.21 0.175 + 20 10 5 DC 0.14 0.105 0.07 0.035 0 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 IF(AV), AVERAGE FORWARD CURRENT (AMP) 1 Figure 6. Power Dissipation Rectifier Device Data MBR0520LT1 RECOMMENDED FOOTPRINT FOR SOD-123 EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE 0.91 0.036 2.36 0.093 4.19 0.165 1.22 0.048 mm inches SOD-123 Rectifier Device Data 3 MBR0520LT1 PACKAGE DIMENSIONS A C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. H AAA AAA 1 K DIM A B C D E H J K B INCHES MIN MAX 0.055 0.071 0.100 0.112 0.037 0.053 0.020 0.028 0.004 --- 0.000 0.004 --- 0.006 0.140 0.152 MILLIMETERS MIN MAX 1.40 1.80 2.55 2.85 0.95 1.35 0.50 0.70 0.25 --- 0.00 0.10 --- 0.15 3.55 3.85 E 2 STYLE 1: PIN 1. CATHODE 2. ANODE J D CASE 425-04 ISSUE C SOD-123 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 Mfax: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 CODELINE TO BE PLACED HERE Rectifier Device Data MBR0520LT1/D