Poly-Pad 1000 (R) Polyester-Based,Thermally Conductive Insulation Material Features and Benefits TYPICAL PROPERTIES OF POLY-PAD 1000 PROPERTY Color * Thermal impedance: 0.82C-in2/W (@50 psi) * Polyester based * For applications requiring non-silicone conformal coatings * Designed for silicone-sensitive applications requiring high performance IMPERIAL VALUE Yellow METRIC VALUE Yellow Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.009 0.229 ASTM D374 Hardness (Shore A) 90 90 ASTM D2240 Breaking Strength (lbs/inch) / (kN/m) 100 18 ASTM D1458 Elongation (%) 10 10 ASTM D412 7000 48 ASTM D412 -4 to 302 -20 to 150 -- Tensile Strength (psi) / (MPa) Continuous Use Temp (F) / (C) ELECTRICAL Dielectric Breakdown Voltage (Vac) TEST METHOD Visual 2500 2500 ASTM D149 Dielectric Constant (1000 Hz) 4.5 4.5 ASTM D150 Volume Resistivity (Ohm-meter) 1011 1011 ASTM D257 THERMAL Thermal Conductivity (W/m-K) 1.2 1.2 ASTM D5470 THERMAL PERFORMANCE vs PRESSURE Pressure (psi) 10 25 50 100 200 TO-220 Thermal Performance (C/W) 4.70 4.25 3.74 3.27 2.89 Thermal Impedance (C-in2/W) (1) 1.30 1.02 0.82 0.61 0.43 1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Poly-Pad 1000 is a fiberglass-reinforced insulator coated with a filled polyester resin. The material offers superior thermal resistance for high performance applications. Typical Applications Include: * Power supplies * Automotive electronics * Motor controls * Power semiconductors Configurations Available: * Sheet form, die-cut parts and roll form * With or without pressure sensitive adhesive Building a Part Number - 1212 - Standard Options NA Section E - 00 Section D 0.009 Section C - Section B PP1000 Section A Polyester-based, thermally conductive insulators from Bergquist provide a complete family of materials for silicone-sensitive applications. Poly-Pads are ideally suited for applications requiring conformal coatings or applications where silicone contamination is a concern (telecomm and certain aerospace applications). Poly-Pads are constructed with ceramic-filled polyester resins coating either side of a fiberglass carrier or a film carrier.The Poly-Pad family offers a complete range of performance characteristics to match individual applications. NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. _ _ _ = Standard configuration dash number, 1212 = 12" x 12" sheets, 12/250 = 12" x 250' rolls, or 00 = custom configuration AC = Adhesive, one side 00 = No adhesive Standard thicknesses available: 0.009" PP1000 = Poly-Pad 1000 Material Note: To build a part number, visit our website at www.bergquistcompany.com. Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_PP_1000_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: PP1000-0.009-00-1212