Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model 3A412
Rev. B
Balun Transformers
50 to 12.5 Balanced
Description
The 3A412 is a low profile balanced to unbalanced transformer designed for push-
pull amplifiers in an easy to use surface mount package for AMPS and GSM.
These compact Xinger
surface mount baluns are ideal for high volume
manufacturing and are more reliable and repeatable than traditional baluns. The
3A412 has an unbalanced port impedance of 50 and balanced port impedances
of 12.5 to ground with a 25 balance between outputs. This eases the matching
of the push-pull amplifier’s power transistors, which have low impedance levels.
The output ports have equal amplitude (-3dB) with 180 degree phase differential.
The Xinger
balun is a result of years of research and development culminating
with a solution so unique, a patent is pending on the design approach. The 3A412
is available on tape and reel for pick and place high volume manufacturing.
ELECTRICAL SPECIFICATIONS***
Frequency
Unbalanced
Port
Impedance
Balanced
Port
Impedance*
Return
Loss
Insertion
Loss
MHz Ohms Ohms dB min dB max
800-1000 50 12.5+j 15 0.48
869-894 50 12.5+j 15 0.35
925-960 50 12.5+j 15 0.40
Amplitude
Balance
Phase
Balance
Power
Handling
Θ
ΘΘ
ΘJC
Operating
Temp.
dB max Degrees max Watts ºC / Watt ºC
0.40 180± 5.0 250 3.8 -55 to +85
0.40 180± 5.0 250 3.8 -55 to +85
Features:
800 – 1000 MHz
180°
°°
° Transformer
50 Ohm to 2 x 12.5+j Ohm
Low Insertion Loss
High Power
Even Order Suppression
Input to Output DC Isolation
Surface Mountable
Tape & Reel
Convenient Package
0.40 180± 5.0 250 3.8 -55 to +85
***Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50 nominal impedance. Specifications subject to change without notice.
**Insertion Loss excludes reflected power. * 12.5
reference to ground
Outline Drawing
3A412 Rev A Mechanical Outline
Dimensions are in Inches [Millimeters]
Top View (Near-side) Bottom View (Far-side)
.075
±.008
[1.91
±0.20
]
Side View
Pin 1 Denotes
Array Number
1.000
±.010
[25.40
±0.25
]
.750
±.010
[19.05
±0.25
]
Pin 2 Pin 3
GND
.115
±.004
[2.92
±0.10
]
Pin 1
GND
.050
±.008
[1.27
±0.20
]
.030
±.004
TYP
[0.76
±0.10
]
.400
±.004
[10.16
±0.10
]
.070
±.008
[1.78
±0.20
]
.060
±.004
[1.52
±0.10
]
.050
±.008
[1.27
±0.20
]
.030
±.004
[0.76
±0.10
]
Pin 3 Pin 2
.358
±.008
[9.09
±0.20
]
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model 3A412
Rev. B
Typical Performance: 700 MHz. to 1100 MHz.
Amplitude Balance 3A412
-0.5
-0.4
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
0.4
0.5
700 800 900 1000 1100
Frequency [MHz]
Amplitude Balance [dB]
Return Loss 3A412
-40
-30
-20
-10
0
700 800 900 1000 1100
Frequency [MHz]
Return Loss [dB]
Insertion Loss 3A412
-0.5
-0.4
-0.3
-0.2
-0.1
0
700 800 900 1000 1100
Frequency [MHz]
Insertion Loss [dB]
Phase Balance 3A412
-190
-185
-180
-175
-170
700 800 900 1000 1100
Frequency [MHz]
Phase Balance [Degrees]
Pin Configuration Mounting Configuration
Dimensions are in Inches [Millimeters]
3A412 Rev A Mounting Footprint
.291 [7.40]
.030 TYP
[0.76]
.070
[1.78] .115 [2.92]
.650
[16.51]
.080 [2.03]
2 Places
12.5 Transmission Line
Referenced to GND
.410 [10.41] .050 [1.27]
To ensure proper electrical and thermal performance
there must be a ground plane with 100%
solder connection underneath the part
.034 [0.86]
.080 [2.03]
.030
[0.76]
50 Transmission Line
Multiple
plated thru holes
to ground
.075 [1.90]