Circuit Protection Solutions
CAMASTER and SAFELOC BS88 Fuseholders Product Guide
NNS, ENS
CAMASTER & SAFELOC BS88 Fuseholders product guide
Available Variants
Catalogue request
NNS ENS
Front connected/Front
connected 32NNSF 63ENSF
Back Stud/Back/Stud 32NNSBS 63ENSBS
Front connected/Back
Stud 32NNSFBS 63ENSFBS
Neutral Links 32NNL 63ENL
Catalogue Part Numbers
Ratin
g (A)
Part
No
Max
Cable
mm2
Rec.
Fuse
Link
Dimensions (mm)
A B C D E F G H J K
32 NNS 16 NSD 25.4 80.3 48.5 2.3 16.0 39.2 57.7 17.0 9.7 M6
63 ENS 35 ESD 29.1 90.0 55.0 3.3 17.7 75.0 67.9 39.2 11.0 M8
Dimensions
Features & Benefits
- Unique slide/snap action carrier which eliminates
the need for fuse carrier contacts
- Low power loss and increased reliability due to the design
of the carrier that provides positive stress free fitting of fuse
and locates position of the fuse.
- Protection against electrical shock. Base contacts are fully
shrouded
- Easy and fast access to the contact terminal screw due to
simple sliding retained shrouds
- Flexible mounting: simple screw or DIN Rail
Typical applications
- Lighting equipment and circuit protection
- Heating equipment and circuit protection
- Motor protection
- Control equipment circuit protection
Safeloc HRC Fuseholder - 660V ac: 32A - 63A
Specification Description:
Fuseholder to use with BS88 Fuse links
for bolted panel mounting or DIN rail.
Dimensions: See Dimensions illustra-
tions
Ratings:
Volts: -550Vac, 415V (63A)
Amps: -32, 63A
Agency information: CE, Compliance
to BS88, EN IEC 60269 and CSA
C22.2. NO .106 standards
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
CAMASTER & SAFELOC BS88 Fuseholders product guide
CM
Specification Description: Fully
shrouded fuse bases with unique cam
action system for BS88 Fuse link
applications
Dimensions: See Dimensions
illustrations
Ratings:
Volts - 660 Vac
Amps : 20, 32 (Compact)32, 63, and
100A
Agency information: CE, Compliance to
BS88, EN IEC 60269
* Please note that the 200A & 400A do not have the CAM action
Features and Benefits
-Easy to remove the carrier from the fuse base due to the cam
action system (*excluding 200A & 400A)
- Enhanced electrical performance level due to special design
of cam system that increase the pressure between fuse base
and fuse carrier contact
-Easy and fast connection; conversion capability, retro fit on
site
-Safer maintenance operations thanks to lockable safety carri-
ers
- Flexible mounting capability both DIN rail and panel bolted
without accesories
- Reduce downtime operations installing a neon clip-in indica-
tor, easy to identify operated fuse location
-Flexible use of multiple configurations needed due to the 2 or
3 poles ganging accessories
Rating
(A) Cat. No
Max
cable
mm2
Rec.
Fuse
Link
Dimensions (mm)
A B C D E F G H J K
20 CM20F 16 NITD 25.4 93.7 60 3.2 17.5 66.0 58.0 28.6 11.9 M6
32 CM32FC 16 NITD 25.4 93.7 60 3.2 17.5 66.0 58.0 28.6 11.9 M6
32 CM32F 16 AAO 31.8 117.5 60 3.2 17.5 66.0 74.0 28.6 11.9 M6
63 CM63F 70 BAO 35.6 125 60 4.75 16.4 86.5 81.0 28.6 11.9 M8
100 CM100F 70 OSD 35.6 125 60 4.75 16.4 86.5 81.0 28.6 11.9 M8
200 200DF 95 DD 70 193 149 17.5 35.6 8 138 30 24 M12
400 400EF 240 ED 98.4 254 192.1 31.8 36.5 - - - - -
Accessory Rating (A) Catalogue No Carton Qty
Back Stud
32
32
63/100
32BSC
32BS
63/100BS
10
10
5
Ganging Links GLP 1 set
Neon Indicator 90-415V ac NI 3
Lockable Safety
Carriers
32LSCC
32LSC
63/100LSC
3
3
3
Neutral Links
32
32
63/100
32CMLC
32CML
63/100CML
1
Security Clip CMSC 20
Camaster HRC Fuseholder - 660V ac: 20A-32A-63A-100A-200A*-400A*
Dimensions
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
CAMASTER & SAFELOC BS88 Fuseholders product guide
Cooper Bussmann Bill GE Lawson
32NNSF V32FF SC32H LCF32FC/FCBK
32NNSFBS V32FB - LCF32FC/BCBK
32NNSBS - SC32P LCF32BC/BCBK
63ENSF V63FF SC63H LCF63FC/FCBK
63ENSFBS V63FB - LCF63FC/BCBK
63ENSBS - SC63P LCF63BC/BCBK
SAFELOC Cross Reference
Two ranges of fuse banks are available, utitlising the
CAMASTER and SAFELOC fuseholders. The fuse banks
consist of single phase assemblies of busbar connected
fuseholders mounted on a back strap, for incorporation in
distribution fuse boards to facilitate compliance with BS5486
parts 1&2.
The banks are available in 4 to 12 ways (4 to 8 ways at
100A) and a compatible range of neutral bars and earth ter-
minal busbars are also available.
Fusebanks
SAFELOC HRC Fuseholder - 660V: 32A-63A
Features Benefits
Cost Saving DIN Rail and screw mounting as
standard
No need to acquire separate mounting
accessories
Time
saving Sliding retained shrouds Reduce installing time, no need to remove
screws to access the fuse base terminal
Increased
safety Base contacts fully shrouded Protection to electrical shock for
accidental touch of live parts
Superior
performance
Slide/snap action for fuse
extractions
Reduce power loss by perfect alignments
of contacts and direct contacts between
fuse tags and fuse holder contacts
No tools required to install or replace
fuselinks
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
CAMASTER & SAFELOC BS88 Fuseholders product guide
SAFELOC
IT’S EASY TO CHANGE!
IT’S EASY TO...
install on DIN
rail or bolted on
panel without
accessories
IT’S EASY TO...
insert fuses into
carrier without
the use of tools
with the
slide/lock
system
IT’S EASY TO...
get lower power
losses with direct
contact between
fuselink and base
terminals
IT’S EASY TO...
access cable
terminals with
sliding retained
shrouds
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
CAMASTER & SAFELOC BS88 Fuseholders product guide
CAMASTER
IT’S EASY TO CHANGE!
IT’S EASY TO...
install on DIN
Rail or bolted on
panel without
accessories
IT’S EASY TO...
access cable
terminals with
hinged shroud
IT’S EASY TO...
remove carrier
from fuse base
using unique
patented CAM
action
IT’S EASY TO...
identify operated
fuselink with a
clip neon
indicator
accessory
IT’S EASY TO...
assembly
mutiple poles
with ganging clip
accessories
IT’S EASY TO...
insert fuses,
using captive
hinged screws
on carrier
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
CAMASTER & SAFELOC BS88 Fuseholders product guide
CAMASTER Features & Benefits
Cooper Bussmann MEM Lawson GE “Red Spot” Fuse & Neutral Links
CM32FC 20MFB LBI20FC/FCBK RS20H
Fuselink:
NITD2-32A
Neutral Link:
32CMLC
CM32FCW 20MFBW LBI20FC/FCWH RS20HWH
CM32FC + 32BSC 20MFC LBI20BC/BCBK RS20P/G
CM32FCW + 32BSC 20MFCW LBI20FC/BCBK RS20P/GWH
CM32FC + 32BSC 20MFD LBI32FC/FCBK RS20PH/G
CM32F 32MFB LBI32FC/FCWH RS32H
Fuselink:
AAO 2 - 32
Neutral Link:
32CML
CM32FW 32MFBW LBI32BC/BCBK RS32HWH
CM32F + 32BS 32MFC LBI32BC/BCWH RS32P
CM32FW + 32BS 32MFD LBI32FC/BCBK RS32PWH
CM32F + 32BS 63MFB LBI63FC/FCBK RS32PH
CM63F 63MFBW LBI63FC/FCWH RS63H
Fuselink:
BAO35-63A
Neutral Link:
63/100CML
CM63FW 63MFC LBI63BC/BCBK RS63HWH
CM63F + 63/100BS 63MFCW LBI63BC/BCWH RS63P
CM63FW + 63/100BS 63MFD LBI63FC/BCBK RS63PH
CM63FW + 63/100BS - LBI63FC/BCWH RS63PHWH
CM100F 100MFB LBI100FC/FCBK RS100H
Fuselink:
OSD80 - 100A
Neutral Link:
63/100CML
CM100FW 100MFBW LBI100FC/FCWH RS100HWH
CM100F + 63/100BS 100MFC LBI100BC/BCBK RS100P
CM100FW + 63/100BS 100MFCW LBI100BC/BCWH RS100PWH
CM100F + 63/100BS 100MFD LBI100FC/BCBK RS100PH
CAMASTER Cross Reference
Features Benefits
Cost Saving
DIN rail and screw mounting as
standard
Retro-fit back stud connections
Reduce inventory with less configurations
of stock required
Time
saving
Fuse carrier with captive, hinged
screws
Neon indicator
Hinged cable terminal shrouds
Reduce downtime and installation time
and avoid losing screws
during fuse replacement
Reduce downtime by immediate location
of operated fuse link
Reduce installing time, no need to remove
screws to access the fuse base terminal
Increased
safety Base contacts fully shrouded Protection to electrical shock for
accidental contact with live parts
Superior
performance Easily extracted carrier
With patented CAM action the carrier
needs up to 93% less extraction to
remove carrier
For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp
©2 00 5 C o o p e r Bu ss ma nn (U K) L t d • Burton-on-the-Wolds,
LE 12 5 T H Un it ed K i n g d o m
Tel : + 4 4 ( 0) 1 5 0 9 8 82 7 3 7 - F a x : +4 4 ( 0 ) 1 50 9 88 2 7 86
sa le s@ co op er bu ss ma nn .c o. uk - ww w.c oo pe rb us sm an n. co m REORDER:FUSEHOLDERBRO
Contact Us:
EUROPEAN HEADQUARTERS
Cooper Bussmann (UK) Ltd
Burton-on-the-Wolds
LE12 5TH
United Kingdom
www.cooperbussmann.com
Tel: 00 44 (0) 1509 882 737
Fax: 00 44 (0) 1509 882 786
WORLD HEADQUARTERS
Cooper Bussmann Inc.
St Louis, Missouri 63178
USA
636-394-2877
www.cooperbussmann.com
Web services
www.cooperbussmann.com
Cooper Bussmann website make available free
information and other resources that include:
- Product data sheets for complete technical informa-
tion on Cooper Bussmann products
- Online catalogues for the latest United States and
European products
- Safety BasICs for the essentials of electrical safety
- Training modules for increasing skill levels of cus-
tomers and end-users
- Cross referencing to find the correct Cooper
Bussmann replacement for a competitor’s fuse
TM
Your authorised Cooper Bussmann Distributor
