BYM13-60-E3/97 - Vishay [General Semiconductor]

BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60

www.vishay.com Vishay General Semiconductor

Reivision: 26-Mar-12 1Document Number: 88548

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount Schottky Barrier Rectifier

FEATURES

• MELF Schottky rectifier

• Ideal for automated placement

• Guardring for overvoltage protection

• Low power losses, high efficiency

• Low forward voltage drop

• High surge capability

• Meets MSL level 1, per J-STD-020, LF maximum peak of

250 °C

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in low voltage high frequency inverters,

freewheeling, DC/DC converters, and polarity protection

applications

MECHANICAL DATA

Case: DO-213AB

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: Two bands indicate cathode end 1st band denotes

device type 2nd band denotes voltage type

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 20 V to 60 V

IFSM 30 A

VF0.50 V, 0.70 V

TJ max. 125 °C, 150 °C

DO-213AB

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER

SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 UNIT

DENOTES SCHOTTKY DEVICES: 1

BAND IS ORANGE SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60

Polarity color bands (2nd band) voltage type Gray Red Orange Yellow Green

Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V

Maximum RMS voltage VRMS 14 21 28 35 42 V

Maximum DC blocking voltage VDC 20 30 40 50 60 V

Maximum average forward rectified current (fig. 1) IF(AV) 1.0 A

Peak forward surge current 8.3 ms single half

sine-wave superimposed on rated load IFSM 30 A

Voltage rate of change (rated VR) dV/dt 10 000 V/μs

Operating junction temperature range TJ - 55 to + 125 - 55 to + 150 °C

Storage temperature range TSTG - 55 to + 150 °C

BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60

www.vishay.com Vishay General Semiconductor

Reivision: 26-Mar-12 2Document Number: 88548

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Pulse test: 300 μs pulse width, 1 % duty cycle

Note

(1) Thermal resistance junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal

Note

(1) AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 UNIT

SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60

Maximum instantaneous

forward voltage (1) 1.0 A VF 0.50 0.70 V

Maximum reverse

current at rated DC

blocking voltage (1)

TA = 25 °C

0.5

TA = 100 °C 10 5.0

Typical junction

capacitance 4.0 V, 1.0 MHz CJ 110 80 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 UNIT

SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60

Maximum thermal resistance (1) RJA 75 °C/W

RJT 30

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

SGL41-40-E3/96 0.137 96 1500 7" diameter plastic tape and reel

SGL41-40-E3/97 0.137 97 5000 13" diameter plastic tape and reel

BYM13-40-E3/96 0.137 96 1500 7" diameter plastic tape and reel

BYM13-40-E3/97 0.137 97 5000 13" diameter plastic tape and reel

SGL41-40HE3/96 (1) 0.137 96 1500 7" diameter plastic tape and reel

SGL41-40HE3/97 (1) 0.137 97 5000 13" diameter plastic tape and reel

BYM13-40HE3/96 (1) 0.137 96 1500 7" diameter plastic tape and reel

BYM13-40HE3/97 (1) 0.137 97 5000 13" diameter plastic tape and reel

025 50 75 100 125 150 175

P.C.B. Mounted on

0.24" x 0.24" (6.0 mm x 6.0 mm)

Copper Land Areas

Resistive or

Inductive Load

SGL41-20 to SGL41-40

SGL41-50 and SGL41-60

1.0

0.75

0.50

0.25

Average Forward Current (A)

Terminal Temperature (°C)

10 100

At Rated T

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60

www.vishay.com Vishay General Semiconductor

Reivision: 26-Mar-12 3Document Number: 88548

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 2 - Typical Reverse Characteristics

Fig. 4 - Typical Junction Capacitance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

00.2 0.4 0.6 0.81.0 1.2 1.4 1.6

0.1

0.01

100

SGL41-20 to SGL41-40

SGL41-50 and SGL41-60

Pulse Width = 300 µs

1 % Duty Cycle

= 150 °C

= 125 °C

= 25 °C

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

020 40 60 80100

100

0.1

0.01

0.001

TJ = 125 °C

TJ = 25 °C

TJ = 75 °C

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (mA)

SGL41-20 to SGL41-40

SGL41-50 and SGL41-60

110 100

0.1

1000

100

Reverse Voltage (V)

Junction Capacitance (pF)

SGL41-20 to SGL41-40

SGL41-50 and SGL41-60

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

DO-213AB

band denotes type and positive end (cathode)

Band

Solderable Ends

D2 = D1 + 0

- 0.008 (0.20)

D2 0.105 (2.67)

0.095 (2.41)

D1 =

0.022 (0.56)

0.018 (0.46)

0.022 (0.56)

0.018 (0.46)

0.205 (5.2)

0.185 (4.7)

Mounting Pad Layout

0.138 (3.5) MAX.

0.049 (1.25) MIN.

0.238 (6.0) REF.

0.118 (3.0) MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.