Stancor
Transglobal International Transformers
Turn To Section 1 For Allied Office Addresses and Local Phone Numbers ALLIED
c
1051
Transglobal International Transformers
Features
c
Meets or Exceeds International Safety Standards
c
Shrouded, Dual Bobbin Construction
c
Electrostatic Shielding Not Required
c
Precision Spaced Pins or ÒQuick-ConnectÓ
Terminals
c
Designed for Use As Single Input and Single
Output Device
Agency Approvals
c
UL Recognized to UL 506
c
CSA Certified to C22.2 #55
c
TV Certified to EN60950 and EN60742
General Specifications
c
Power Rating: 2.5-175 VA
c
Primary: 115 VAC/230 VAC, 50/60 Hz
c
Secondary: Series or Parallel
c
Insulation: Class B (130¡C)
c
Dielectric: 4000 V RMS Hi-Pot
Stock Mfr.Õs Fig. VA
No. Type
Secondary RMS Rating
ParallelSeries*
Dimensions Ñ Inches
WHMABCL
928-2300 TG2H-10 A 2.5 10.0 V C.T. @ 0.25 A 5.0 V @ 0.50 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2305 TG05-10 A 5.0 10.0 V C.T. @ 0.50 A 5.0 V @ 1.00 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2310 TG10-10 A 10.0 10.0 V C.T. @ 1.00 A 5.0 V @ 2.00 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2315 TG20-10 A 20.0 10.0 V C.T. @ 2.00 A 5.0 V @ 4.00 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2320 TG30-10 A 30.0 10.0 V C.T. @ 3.00 A 5.0 V @ 6.00 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2325 TG56-10 A 56.0 10.0 V C.T. @ 5.60 A 5.0 V @ 11.20 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.25 15.14
928-2330 TG2H-12 A 2.5 12.6 V C.T. @ 0.20 A 6.3 V @ 0.40 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2335 TG05-12 A 5.0 12.6 V C.T. @ 0.40 A 6.3 V @ 0.80 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2340 TG10-12 A 10.0 12.6 V C.T. @ 0.80 A 6.3 V @ 1.60 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2345 TG20-12 A 20.0 12.6 V C.T. @ 1.60 A 6.3 V @ 3.20 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2350 TG30-12 A 30.0 12.6 V C.T. @ 2.40 A 6.3 V @ 4.80 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2355 TG56-12 A 56.0 12.6 V C.T. @ 4.40 A 6.3 V @ 8.80 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.25 15.14
928-2360 TG2H-16 A 2.5 16.0 V C.T. @ 0.15 A 8.0 V @ 0.30 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2365 TG05-16 A 5.0 16.0 V C.T. @ 0.31 A 8.0 V @ 0.62 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2370 TG10-16 A 10.0 16.0 V C.T. @ 0.62 A 8.0 V @ 1.25 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2375 TG20-16 A 20.0 16.0 V C.T. @ 1.25 A 8.0 V @ 2.50 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2380 TG30-16 A 30.0 16.0 V C.T. @ 1.90 A 8.0 V @ 3.80 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2385 TG56-16 A 56.0 16.0 V C.T. @ 3.50 A 8.0 V @ 7.00 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.41 15.04
928-2390 TG2H-20 A 2.5 20.0 V C.T. @ 0.12 A 10.0 V @ 0.24 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2395 TG05-20 A 5.0 20.0 V C.T. @ 0.25 A 10.0 V @ 0.50 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2400 TG10-20 A 10.0 20.0 V C.T. @ 0.50 A 10.0 V @ 1.00 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2405 TG20-20 A 20.0 20.0 V C.T. @ 1.00 A 10.0 V @ 2.00 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2410 TG30-20 A 30.0 20.0 V C.T. @ 1.50 A 10.0 V @ 3.00 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2415 TG56-20 A 56.0 20.0 V C.T. @ 2.80 A 10.0 V @ 5.60 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.25 15.14
928-2420 TG2H-24 A 2.5 24.0 V C.T. @ 0.10 A 12.0 V @ 0.20 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2425 TG05-24 A 5.0 24.0 V C.T. @ 0.21 A 12.0 V @ 0.42 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2430 TG10-24 A 10.0 24.0 V C.T. @ 0.42 A 12.0 V @ 0.84 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2435 TG20-24 A 20.0 24.0 V C.T. @ 0.83 A 12.0 V @ 1.66 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2440 TG30-24 A 30.0 24.0 V C.T. @ 1.25 A 12.0 V @ 2.50 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2445 TG56-24 A 56.0 24.0 V C.T. @ 2.33 A 12.0 V @ 4.66 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.25 15.14
928-2450 TG2H-28 A 2.5 28.0 V C.T. @ 0.09 A 14.0 V @ 0.18 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2455 TG05-28 A 5.0 28.0 V C.T. @ 0.18 A 14.0 V @ 0.36 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2460 TG10-28 A 10.0 28.0 V C.T. @ 0.36 A 14.0 V @ 0.72 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2465 TG20-28 A 20.0 28.0 V C.T. @ 0.72 A 14.0 V @ 1.44 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2470 TG30-28 A 30.0 28.0 V C.T. @ 1.06 A 14.0 V @ 2.12 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2475 TG56-28 A 56.0 28.0 V C.T. @ 2.00 A 14.0 V @ 4.00 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.25 15.14
928-2480 TG2H-36 A 2.5 36.0 V C.T. @ 0.07 A 18.0 V @ 0.14 A 1.630 1.310 1.130 1.060 0.200 0.250 1.000 0.025 7.62 7.11
928-2485 TG05-36 A 5.0 36.0 V C.T. @ 0.14 A 18.0 V @ 0.28 A 1.630 1.310 1.380 1.060 0.200 0.400 1.000 0.025 8.22 7.66
928-2490 TG10-36 A 10.0 36.0 V C.T. @ 0.28 A 18.0 V @ 0.56 A 1.940 1.590 1.380 1.250 0.200 0.400 1.140 0.035 9.20 8.57
928-2495 TG20-36 A 20.0 36.0 V C.T. @ 0.56 A 18.0 V @ 1.12 A 2.250 1.880 1.630 1.500 0.400 0.400 1.460 0.035 11.18 10.42
928-2500 TG30-36 A 30.0 36.0 V C.T. @ 0.82 A 18.0 V @ 1.64 A 2.630 2.190 1.590 0.550 0.280 1.680 0.040 12.85 11.98
928-2505 TG56-36 A 56.0 36.0 V C.T. @ 1.56 A 18.0 V @ 3.12 A 3.000 2.500 1.840 à 0.600 0.300 1.900 0.040 16.25 15.14
*C.T. Ñ Center tap. Note: Neither primary nor secondary windings are to be used individually; Each must be wired either in-series or in-parallel for use as a single
input and single output. MW Ñ 1.75", ML Ñ 2.19". àMW Ñ 2.00"; ML Ñ 2.50".
Chassis Mount Ñ Primary 115 VAC/230 VAC
EACH
1-49 50-99
Pin
Sq. (In.)
PC Mount Ñ Primary 115 VAC/230 VAC
Stock Mfr.Õs Fig. VA
No. Type
Secondary RMS Rating
ParallelSeries*
Dimensions Ñ Inches
WDMWMDCQ.C.H
EACH
1-49 50-99
928-2100 TGC25-10 B 25 10.0 V C.T. @ 2.50 A 5.0 V @ 5.00 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2105 TGC43-10 B 43 10.0 V C.T. @ 4.30 A 5.0 V @ 8.60 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2110 TGC80-10 C 80 10.0 V C.T. @ 8.00 A 5.0 V @ 16.00 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.85
928-2115 TGC130-10 C 130 10.0 V C.T. @ 13.00 A 5.0 V @ 26.00 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2120 TGC175-10 C 175 10.0 V C.T. @ 17.50 A 5.0 V @ 35.00 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2125 TGC25-12 B 25 12.6 V C.T. @ 2.00 A 6.3 V @ 4.00 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2130 TGC43-12 B 43 12.6 V C.T. @ 3.40 A 6.3 V @ 6.80 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2135 TGC80-12 C 80 12.6 V C.T. @ 6.30 A 6.3 V @ 12.60 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.52
928-2140 TGC130-12 C 130 12.6 V C.T. @ 10.30 A 6.3 V @ 20.60 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2145 TGC175-12 C 175 12.6 V C.T. @ 14.00 A 6.3 V @ 28.00 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2150 TGC25-16 B 25 16.0 V C.T. @ 1.60 A 8.0 V @ 3.20 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2155 TGC43-16 B 43 16.0 V C.T. @ 2.70 A 8.0 V @ 5.40 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2160 TGC80-16 C 80 16.0 V C.T. @ 5.00 A 8.0 V @ 10.00 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.52
928-2165 TGC130-16 C 130 16.0 V C.T. @ 8.10 A 8.0 V @ 16.20 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2170 TGC175-16 C 175 16.0 V C.T. @ 11.00 A 8.0 V @ 22.00 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2175 TGC25-20 B 25 20.0 V C.T. @ 1.25 A 10.0 V @ 2.50 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2180 TGC43-20 B 43 20.0 V C.T. @ 2.20 A 10.0 V @ 4.40 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2185 TGC80-20 C 80 20.0 V C.T. @ 4.00 A 10.0 V @ 8.00 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.85
928-2190 TGC130-20 C 130 20.0 V C.T. @ 6.50 A 10.0 V @ 13.00 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2195 TGC175-20 C 175 20.0 V C.T. @ 8.80 A 10.0 V @ 17.60 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2200 TGC25-24 B 25 24.0 V C.T. @ 1.00 A 12.0 V @ 2.00 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2205 TGC43-24 B 43 24.0 V C.T. @ 1.80 A 12.0 V @ 3.60 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2210 TGC80-24 C 80 24.0 V C.T. @ 3.30 A 12.0 V @ 6.60 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.85
928-9000 TGC130-24 C 130 24.0 V C.T. @ 5.40 A 12.0 V @ 10.80 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2220 TGC175-24 C 175 24.0 V C.T. @ 7.30 A 12.0 V @ 14.60 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2225 TGC25-28 B 25 28.0 V C.T. @ 0.90 A 14.0 V @ 1.80 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2230 TGC43-28 B 43 28.0 V C.T. @ 1.50 A 14.0 V @ 3.00 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2235 TGC80-28 C 80 28.0 V C.T. @ 2.80 A 14.0 V @ 5.60 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.85
928-2240 TGC130-28 C 130 28.0 V C.T. @ 4.60 A 14.0 V @ 9.20 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2245 TGC175-28 C 175 28.0 V C.T. @ 6.25 A 14.0 V @ 12.50 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2250 TGC25-36 B 25 36.0 V C.T. @ 0.70 A 18.0 V @ 1.40 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2255 TGC43-36 B 43 36.0 V C.T. @ 1.20 A 18.0 V @ 2.40 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2260 TGC80-36 C 80 36.0 V C.T. @ 2.20 A 18.0 V @ 4.40 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.85
928-2265 TGC130-36 C 130 36.0 V C.T. @ 3.60 A 18.0 V @ 7.20 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2270 TGC175-36 C 175 36.0 V C.T. @ 4.80 A 18.0 V @ 9.60 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.84 30.62
928-2275 TGC25-230 B 25 230.0 V C.T. @ 0.11 A 115.0 V @ 0.22 A 2.380 2.810 1.940 2.380 Ñ 0.310 0.187 12.20 11.38
928-2280 TGC43-230 B 43 230.0 V C.T. @ 0.19 A 115.0 V @ 0.38 A 2.750 3.250 1.940 2.810 Ñ 0.310 0.187 15.58 14.52
928-2285 TGC80-230 C 80 230.0 V C.T. @ 0.35 A 115.0 V @ 0.70 A 3.000 2.500 2.380 2.000 2.190 0.310 0.187 21.29 19.85
928-2290 TGC130-230 C 130 230.0 V C.T. @ 0.57 A 115.0 V @ 1.14 A 3.380 2.810 2.880 2.250 2.500 0.380 0.250 28.17 26.26
928-2295 TGC175-230 C 175 230.0 V C.T. @ 0.76 A 115.0 V @ 1.52 A 3.750 3.130 2.880 2.500 2.500 0.380 0.250 32.85 30.62
*C.T. Ñ Center tap. Note: Neither primary nor secondary windings are to be used individually; Each must be wired either in-series or in-parallel for use as a single input and single output.
17
Visti StancorÕs Website at www.stancor.com