MF-RX375-AP - Bourns - Datasheet.Directory

Environmental Characteristics

Operating/Storage Temperature ...................... -40 °C to +85 °C

Maximum Device Surface Temperature

in Tripped State ............................................ 125 °C

Passive Aging .................................................. +85 °C, 1000 hours ...........................................±5 % typical resistance change

Humidity Aging................................................. +85 °C, 85 % R.H. 1000 hours .........................±5 % typical resistance change

Thermal Shock ................................................ -40 °C to +85 °C, 10 times ................................±10 % typical resistance change

Solvent Resistance .......................................... MIL-STD-202, Method 215 ...............................No change

Vibration .......................................................... MIL-STD-883C, Method 2007.1,.......................No change

Condition A

Test Procedures And Requirements For Model MF-RX Series

Test Test Conditions Accept/Reject Criteria

Visual/Mech. .................................................... Verify dimensions and materials .......................Per MF physical description

Resistance ....................................................... In still air @ 23 °C .............................................Rmin ≤ R ≤ Rmax

Time to Trip ...................................................... 5 times Ihold, Vmax, 23 °C ...............................T ≤ max. time to trip (seconds)

Hold Current .................................................... 30 min. at Ihold .................................................No trip

Trip Cycle Life .................................................. Vmax, Imax, 100 cycles ....................................No arcing or burning

Trip Endurance ................................................ Vmax, 48 hours .................................................No arcing or burning

UL File Number ............................................... E 174545S

CSA File Number ............................................. CA 110338

TÜV File Number ............................................. R2057213

Electrical Characteristics

Model V max.

Volts

I max.

Amps

Ihold

Itrip Initial

Resistance

1 Hour (R1)

Post-Trip

Resistance

Max. Time

to Trip

Tripped

Power

Dissipation

Amperes

at 23 °C

Ohms

at 23 °C

Ohms

at 23 °C

Amperes

at 23 °C

Seconds

at 23 °C

Watts

at 23 °C

Hold Trip Min. Max. Max. Typ.

MF-RX110 60 40 1.10 2.20 0.15 0.25 0.38 5.5 8.2 1.50

MF-RX135 60 40 1.35 2.70 0.12 0.19 0.30 6.75 9.6 1.70

MF-RX160 60 40 1.60 3.20 0.09 0.14 0.22 8.0 11.4 1.90

MF-RX185 60 40 1.85 3.70 0.08 0.12 0.19 9.25 12.6 2.10

MF-RX250 60 40 2.50 5.00 0.05 0.08 0.13 12.5 15.6 2.50

MF-RX300 60 40 3.00 6.00 0.04 0.06 0.10 15.0 19.8 2.80

MF-RX375 60 40 3.75 7.50 0.03 0.05 0.08 18.75 24.0 3.20

Features

■ Radial Leaded Devices

■ Cured, ﬂ ame retardant epoxy polymer

insulating material meets UL 94V-0

requirements

■ Agency recognition:

■ RoHS compliant* and halogen free**

MF-RX Series - PTC Resettable Fuses

The MF-RX Series is currently

available, although not recommended

for new designs. The higher voltage

rated MF-RX/72 Series is preferred.

Thermal Derating Chart - Ihold / Itrip (Amps)

Model Ambient Operating Temperature

-40 ºC -20 ºC 0 ºC 23 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC

MF-RX110 1.71 / 3.42 1.50 / 3.00 1.31 / 2.62 1.10 / 2.20 0.89 / 1.78 0.79 / 1.58 0.69 / 1.38 0.59 / 1.18 0.44 / 0.88

MF-RX135 2.09 / 4.18 1.84 / 3.68 1.61 / 3.22 1.35 / 2.70 1.09 / 2.18 0.97 / 1.94 0.85 / 1.70 0.73 / 1.46 0.54 / 1.08

MF-RX160 2.48 / 4.96 2.18 / 4.36 1.90 / 3.80 1.60 / 3.20 1.30 / 2.60 1.15 / 2.30 1.01 / 2.02 0.86 / 1.72 0.64 / 1.28

MF-RX185 2.87 / 5.74 2.52 / 5.04 2.20 / 4.40 1.85 / 3.70 1.50 / 3.00 1.33 / 2.66 1.17 / 2.34 1.00 / 2.00 0.74 / 1.48

MF-RX250 3.88 / 7.76 3.40 / 6.80 2.98 / 5.96 2.50 / 5.00 2.03 / 4.06 1.80 / 3.60 1.58 / 3.16 1.35 / 2.70 1.00 / 2.00

MF-RX300 4.65 / 9.30 4.08 / 8.16 3.57 / 7.14 3.00 / 6.00 2.43 / 4.86 2.16 / 4.32 1.89 / 3.78 1.62 / 3.24 1.20 / 2.40

MF-RX375 5.81 / 11.6 5.10 / 10.2 4.46 / 8.92 3.75 / 7.50 3.04 / 6.08 2.70 / 5.40 2.36 / 4.72 2.03 / 4.06 1.50 / 3.00

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

** Bourns follows the prevailing deﬁ nition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;

(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

*RoHS COMPLIANT

**HALOGEN FREE

MF-RX Series - PTC Resettable Fuses

Product Dimensions

MF-RX SERIES, REV. P, 11/14

Additional Features

■ Bulk packaging, tape and reel and Ammo-

Pak available on most models

■ Resettable circuit protection

Applications

Almost anywhere there is a low voltage power

supply, up to 60 V and a load to be protected,

including:

■ Security and ﬁ re alarm systems

■ Loud speakers

■ Power transformers

Model A B C D E Physical Characteristics

Max. Max. Nom. Tol. ± Min. Max. Style Lead Dia. Material

MF-RX110 13.0 18.0 5.1 0.7 7.6 3.1

1 0.81

Sn/Cu

(0.512) (0.709) (0.201) (0.028) (0.299) (0.122) (0.032)

MF-RX135 14.5 19.6 5.1 0.7 7.6 3.1

1 0.81

Sn/Cu

(0.571) (0.772) (0.201) (0.028) (0.299) (0.122) (0.032)

MF-RX160 16.3 21.3 5.1 0.7 7.6 3.1

1 0.81

Sn/Cu

(0.642) (0.839) (0.201) (0.028) (0.299) (0.122) (0.032)

MF-RX185 17.8 22.9 5.1 0.7 7.6 3.1

1 0.81

Sn/Cu

(0.701) (0.902) (0.201) (0.028) (0.299) (0.122) (0.032)

MF-RX250 21.3 26.4 10.2 0.7 7.6 3.1

1 0.81

Sn/Cu

(0.839) (1.039) (0.402) (0.028) (0.299) (0.122) (0.032)

MF-RX300 24.9 30.0 10.2 0.7 7.6 3.1

1 0.81

Sn/Cu

(0.980) (1.181) (0.402) (0.028) (0.299) (0.122) (0.032)

MF-RX375 28.4 33.5 10.2 0.7 7.6 3.1

1 0.81

Sn/Cu

(1.118) (1.319) (0.402) (0.028) (0.299) (0.122) (0.032)

Packaging options:

BULK: All models = 500 pcs. per bag.

TAPE & REEL: MF-RX110 – MF-RX160 = 1500 pcs. per reel; MF-RX185 – MF-RX375 = 1000 pcs. per reel

AMMO-PACK: MF-RX110 – MF-RX160 = 1000 pcs. per reel; MF-RX185 – MF-RX375 = 500 pcs. per reel

0.81 (20AWG)

NOTE: Kinked lead option is available for

board standoff. Contact factory for details.

Typical Part Marking

Represents total content. Layout may vary.

RX110

0180T

MANUFACTURER'S

TRADEMARK

PART

IDENTIFICATION

LOT NO.

(T = TAIWAN

S = CHINA)

DATE CODE

(FIRST DIGIT =

LAST DIGIT OF YEAR;

NEXT THREE DIGITS =

DAY OF YEAR)

How to Order

MF - RX 110 - 0 - 99

Multifuse®

Product Designator

Series

RX = Radial Leaded Component

Hold Current, Ihold

110-375 (1.10 Amps - 3.75 Amps)

Packaging Options

- __ = Bulk Packaging without part

number sufﬁ x option

- 0-99 = Bulk Packaging with part

number sufﬁ x option

- 2 = Tape and Reel without part

number sufﬁ x option*

- 2-99 = Tape and Reel with part number

sufﬁ x option

- AP = Ammo-Pak*

- 0-14 = Kinked leads where straight

leads are standard

- 0-17 = Straight leads where kinked

leads are standard

Part Number Sufﬁ x Option

- 99 = As of date code April 1, 2005 all

MF-RX models are RoHS

compliant. The sufﬁ x “-99”

can be used if a new part

number is required to reference

the RoHS compliance.

Examples:

MF-RX110 ...............Bulk packaging

MF-RX110-0-99 .......Bulk packaging

with part number

sufﬁ x option

MF-RX110-2 ............Tape and reel

packaging

MF-RX110-2-99 .......Tape and reel

packaging with

part number

sufﬁ x option

*Packaged per EIA486-B

Typical Time to Trip at 23 ˚C

0.01

0.001

1 10 100

0.1

100

1000

Fault Current (Amps)

Time to Trip (Seconds)

MF-RX110

MF-RX135

MF-RX160

MF-RX185

MF-RX250

MF-RX300

MF-RX375

MF-RX Series - PTC Resettable Fuses

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Carrier tape width W W 18 -0.5/+1.0

(.709) (-0.02/+.039)

Hold down tape width W4 11

min.

W0 (.433)

Hold down tape No protrusion

Top distance between tape edges W2 W

6 3

max.

(.118)

Sprocket hole position W1 W

5 9 -0.5/+0.75

(.354) (-0.02/+0.03)

Sprocket hole diameter D0 D

0 4 ±0.2

(.157) (±.0078)

Abscissa to plane (straight lead) H H 18.5 ±3.0

(.728) (±.118)

Abscissa to plane (kinked lead) H0 H

0 16 ±0.5

(.63) (±.02)

Abscissa to top (straight lead) H1 H

1 38.0

max.

(1.496)

Abscissa to top (kinked lead) H1 H

1 32.2

max.

(1.268)

Overall width w/lead protrusion (straight lead) C1 55.0

max.

(2.165)

Overall width w/lead protrusion (kinked lead) C1 43.2

max.

(1.7)

Overall width w/o lead protrusion (straight lead) C2 54.0

max.

(2.126)

Overall width w/o lead protrusion (kinked lead) C2 42.5

max.

(1.673)

Lead protrusion I1 L

1 1.0

max.

(.039)

Protrusion of cutout L L 11

max.

(.433)

Protrusion beyond hold-down tape I2 I

2 Not speciﬁ ed

Sprocket hole pitch P0 P

0 12.7 ±0.3

(0.5) (±.012)

Pitch tolerance 20 consecutive ±1

(±.039)

Device pitch: MF-R005–MF-R160, MF-R/90,

MF-RX110/72–MF-RX185/72

12.7 ±0.3

(0.5) (±.012)

Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375

MF-R/600, MF-RX250/72–MF-RX375/72

25.4 ±0.6

(1.0) (±.024)

Tape thickness t t 0.9

max.

(.035)

Tape thickness with splice: MF-R010–MF-R160, t1

max.

MF-RX110/72–MF-RX185/72

1.5

(.059)

Tape thickness with splice: MF-R250–MF-R1100, t1

max.

MF-RX110–MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 2.3

(.091)

Splice sprocket hole alignment

0 ±0.3

(±.012)

Body lateral deviation Δh Δh 0

±1.0

(±.039)

Body tape plane deviation Δp Δp 0

±1.3

(±.051)

MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series

Tape and Reel Speciﬁ cations

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.

DIMENSIONS: MM

(INCHES)

Reel

Upper side

Tape

Lower side

User

direction

feed

User direction of feed

Cross section A - B

Reference plane

H0W1

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F 5.08 ±0.2

(0.2) (±0.008)

Reel width w W2 56.0

max.

(2.205)

Reel diameter d a 370.0

max.

(14.57)

Space between ﬂ anges less device 4.75 ±3.25

W1 h (.187) (±.128)

Arbor hole diameter f c 26.0 ±12.0

(1.024) (±.472)

Core diameter: MF-R, MF-RX, MF-R/90 h n 80

max.

(3.15)

Core diameter: MF-R/600 h n 91

max.

(3.58)

Box: MF-R, MF-RX, MF-R/90 62 355 345

nom.

(2.44) (14.0) (13.6)

Box: MF-R/600 64 372 362

max.

(2.52) (14.6) (14.25)

Consecutive missing places: MF-R, MF-RX, MF-R/90 3 max.

Consecutive missing places: MF-R/600 none

Empty places per reel: MF-R, MF-RX, MF-R/90 Not speciﬁ ed

Empty places per reel: MF-R/600 0.1 %

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

Taped Component Dimensions -

Figure 1

DIMENSIONS: MM

(INCHES)

MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series

Tape and Reel Speciﬁ cations

Reel Dimensions - Figure 2

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Bourns:

MF-RX110-AP MF-RX135-AP MF-RX110-2 MF-RX135-2 MF-RX300-AP MF-RX375-2 MF-RX110-005 MF-

RX135-005 MF-RX185-AP MF-RX160-AP MF-RX300-2-99 MF-RX110-2-99 MF-RX250-2-99 MF-RX375-99 MF-

RX185-99 MF-RX300 MF-RX375 MF-RX185-2 MF-RX185-2-014 MF-RX375-0-12 MF-RX185-2-99 MF-RX110-0-99

MF-RX110-AP-99 MF-RX135-0-99 MF-RX135-AP-99 MF-RX160-0-99 MF-RX160-2-99 MF-RX160-AP-99 MF-

RX185-0-99 MF-RX185-AP-99 MF-RX250-0-99 MF-RX250-AP-99 MF-RX300-AP-99 MF-RX375-0-99 MF-RX375-2-

99 MF-RX185-005 MF-RXLAB MF-RX300-2 MF-RX300-005 MF-RX250-2 MF-RX375-005 MF-RX160 MF-RX160-

2 MF-RX250-005 MF-RX135 MF-RX110 MF-RX160-005 MF-RX250 MF-RX185 MF-RX250-AP MF-RX250-2-14

MF-RX135-2-99 MF-RX250-99 MF-RX110-99 MF-RX160-99 MF-RX300-0-99 MF-RX110-0-14 MF-RX110-2-14 MF-

RX135-0-14 MF-RX135-0-H2 MF-RX135-2-14 MF-RX160-0-14 MF-RX185-0-14 MF-RX185-0-14-99 MF-RX185-2-

14 MF-RX185-2-14-99 MF-RX250-0-14 MF-RX300-0-14 MF-RX300-2-14 MF-RX300-AP-14 MF-RX375-0-14 MF-

RX375-AP-14 MF-RX375-AP MF-RX375-AP-99